RGB led and inverted pins between two views

GoogleCodeExporter commented 9 years ago

Hi,

the pins "G" and "B" for the RGB Led, are inverted between the 
breadboard/schematics view... (see photo)

thank's for all, ivan

Original issue reported on code.google.com by ivan.ton...@gmail.com on 4 Feb 2014 at 3:40

Attachments:

Image.jpg

GoogleCodeExporter commented 9 years ago

In fact, you can swap the "G" and "B" by selecting "pin order: rgb" instead of 
"rbg".

This is in fact a usability issue: by default, users expect to have "pin order: 
rgb" and "polarity: common cathode" as they're the most common:
http://learn.adafruit.com/adafruit-arduino-lesson-3-rgb-leds/breadboard-layout
http://wiring.org.co/learning/basics/rgbled.html

Original comment by david.pe...@gmail.com on 5 Feb 2014 at 2:02

GoogleCodeExporter commented 9 years ago

Here is my patch.

Could someone test it? I've tried regenerating parts.db but that's not 
sufficient.

Original comment by david.pe...@gmail.com on 5 Feb 2014 at 2:42

Attachments:

0001-Default-RGB-LED-changed-from-rbg-anode-to-rgb-cathod.patch

GoogleCodeExporter commented 9 years ago

thanks david, you are right but i corrected the order of the pins as well.
and added the right module id in your fzb change. 

so if you want to use the fix for your installation of fritzing please
copy the attached svg's to: %fritzing-dir%/parts/svg/core/schematic/
and the attached fzp-files to: %fritzing-dir%/parts/core/
copy attached core.fzb to : %fritzing-dir%/bins/

ATTATION: do not copy the fzp's into the pdb-folder!!!

Original comment by bluearc....@gmail.com on 5 Feb 2014 at 3:45

Changed state: Fixed

Attachments:

buixuanan / fritzing

RGB led and inverted pins between two views #2914