Closed GoogleCodeExporter closed 9 years ago
That sounds pretty bad--can you elaborate a little on what has happened? And
point out the exact issue on the screenshots?
The gerber files are looking absolutely fine as far as I can tell.
Also, please let us know which version you were using and if this is still
happening with 0.8.7.
Original comment by andre.knoerig@gmail.com
on 14 Feb 2014 at 4:18
iv been using the original fritzing for ages then one day i got a message pop
up saying a new version is available> fritzing.2013.07.27.pc i clicked to
download. so i did and when i opened it i see that is was a beta..the update
notification did not state it was a beta and i was not impressed but ok i give
it and now im having this random silkscreen problem.i recently got another
update notification on the program so i accepted and your new one constantly
crashes fritzing.0.8.7b.pc
so im forced to use the one with silkscreen problem :(
Original comment by petegrim...@gmail.com
on 15 Feb 2014 at 5:40
just made a new board and the silkscreen problem is still in this release too
fritzing.0.8.7b.pc
Original comment by petegrim...@gmail.com
on 15 Feb 2014 at 7:37
Attachments:
Is this the same issue as you had before? I still cannot see the problem with
the original file.
Can you attach the .fzz for this one so we can try to track it down?
From looking at your screenshot, it seems as if it was taken from OSHpark? It
could also be that their Gerber interpreter has issues with processing our
Gerber files. I opened the original gerber files you posted with an external
gerber viewer and could not find any issues.
Also it would be good to learn more about the crashes you are experiencing with
0.8.7b. Btw, note that Fritzing has always been "beta", basically the whole
project still is. That obviously doesn't mean you can't produce solid results,
but glitches might occur. That's why a look at the gerber files is always
advised, as they are the "objective" view on your board layout.
Original comment by andre.knoerig@gmail.com
on 16 Feb 2014 at 10:37
i did contact them first as i thought maybe there pcb manufacture had problems
but there blaiming the fritzing program. also if i use eagle i dont have a
problem
Original comment by petegrim...@gmail.com
on 17 Feb 2014 at 4:18
Attachments:
Issue has moved to new issue tracker at github. Please continue the discussion
at https://github.com/fritzing/fritzing-app/issues
Original comment by andre.knoerig@gmail.com
on 23 Sep 2014 at 3:44
Original issue reported on code.google.com by
petegrim...@gmail.com
on 10 Feb 2014 at 3:45Attachments: