search

buixuanan / fritzing

Automatically exported from code.google.com/p/fritzing
0 stars 0 forks source link

User-created parts #875

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
This is a space for Fritzing users to upload and share their self-created 
parts with others.

Add your part by adding a comment to this issue and attach your part as a 
.fzpz file. 
(You can get this by right-clicking your part in the parts palette and then 
clicking "Export..")

Make sure you have quality-checked it, and add a description in the comments 
text. If you have any problems with your part, please try to fix it first by 
getting help in the fritzing.org forums.

Original issue reported on code.google.com by andre.knoerig@gmail.com on 22 Oct 2009 at 7:54

GoogleCodeExporter commented 9 years ago 
A simple solar cell and a AAA rechargeable battery

Original comment by Jeff.Bei...@gmail.com on 25 Jul 2011 at 9:52

Attachments:

GoogleCodeExporter commented 9 years ago 
My first part, an Omron D2F series snap action switch.

This is a D2F-FL to be exact, though the dimensions and schematics are 
essentially identical to all the switches in the D2F series.

Original comment by michael....@gmail.com on 25 Jul 2011 at 9:21

Attachments:

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
The high-power shift register that SparkFun carries.

The labels are a bit awkward, but it matches what's in the datasheet. :)

NOTE: The version I uploaded two days ago was bugged! I had started the part as 
a graphical clone of another dip20 chip, but it had a very strange connector 
behavior: Fritzing was always automatically connecting VCC and one of the NC 
pins, and connections directly to VCC were not accepted (the connection would 
jump to NC). This leads me to believe that internally the two connectors were 
using the same ID (or equivalent).

Ultimately, I fixed the bug with the part by deleting the old VCC connector and 
adding a new one. I have deleted my original comment and attached the bugged 
file for comparison purposes by the developers.

I hope that helps!

UPDATE: The last fixed-VCC upload I did had an incorrect anchor point in the 
schematic view. That has been fixed, hence this now third post for the part.

Original comment by austin.s...@gmail.com on 28 Jul 2011 at 3:57

Attachments:

GoogleCodeExporter commented 9 years ago 
Hi there, awesome software.

This is the part for our Forebrain dev board.

Original comment by uair...@gmail.com on 28 Jul 2011 at 4:20

Attachments:

GoogleCodeExporter commented 9 years ago 
The Sparkfun Evaluation board rs232 version to Telit GM862-GPS module.

By Adeilton Rocha From Brasil

Original comment by 4deilton...@gmail.com on 29 Jul 2011 at 4:37

Attachments:

GoogleCodeExporter commented 9 years ago 
Made a Op-Amp LM741
By Graffiti

Original comment by Helmut.B...@gmail.com on 1 Aug 2011 at 11:14

Attachments:

GoogleCodeExporter commented 9 years ago 
This is a 16 bit input - output expander, for the I2C bus.

From Microchip.

http://ww1.microchip.com/downloads/en/DeviceDoc/20090C.pdf

Original comment by dreamg...@gmail.com on 1 Aug 2011 at 11:39

Attachments:

GoogleCodeExporter commented 9 years ago 
This is my first part, mostly built as a learning experience. I started with 
something very simple: a knob potentiometer from Sparkfun: 
http://www.sparkfun.com/products/9806

Original comment by bertrand...@gmail.com on 8 Aug 2011 at 9:48

Attachments:

GoogleCodeExporter commented 9 years ago 
This is the UDN2981 8-channel source driver chip.

Original comment by casch...@mac.com on 10 Aug 2011 at 8:10

Attachments:

GoogleCodeExporter commented 9 years ago 
This is a DC-DC converter TMA1205S from Traco. Input 12VDC, output 5VDC. Hope 
this'll be useful.

Original comment by kar110...@gmail.com on 10 Aug 2011 at 12:39

Attachments:

GoogleCodeExporter commented 9 years ago 
Also find attached L6208 bipolar stepper driver in DIP24 package.

Original comment by kar110...@gmail.com on 10 Aug 2011 at 12:45

Attachments:

GoogleCodeExporter commented 9 years ago 
This is the RBBB from JEE labs (Really Bare Bones Board).

Original comment by casch...@mac.com on 11 Aug 2011 at 12:30

Attachments:

GoogleCodeExporter commented 9 years ago 
Decade Counter 4000 Series

Original comment by esotil...@gmail.com on 19 Aug 2011 at 1:58

Attachments:

GoogleCodeExporter commented 9 years ago 
Decade Counter 7-Segments Decoded 4000 Series

Original comment by esotil...@gmail.com on 19 Aug 2011 at 2:13

Attachments:

GoogleCodeExporter commented 9 years ago 
DB-25 connectors, both M and F. I'm a noob at Fritzing and electronics, so 
constructive feedback appreciated. PCB images are from contrib (not mine). 
Schematic is based on mystery part. I have no idea what such a connector should 
look like in schematic view. I made the breadboard image fit a breadboard but I 
don't know if such a thing makes sense.

Original comment by kungfuma...@gmail.com on 21 Aug 2011 at 11:19

Attachments:

GoogleCodeExporter commented 9 years ago 
@kungfuma...

This looks very nice. I think, the schematics should look like this: 
http://www.mikrocontroller.net/attachment/31278/programmer.png

That are the Eagle-Schematics and it makes clear, what should be where.

That the connector matches in the breadboard makes perfectly sense. Well done!

Original comment by stefanhermann79@googlemail.com on 22 Aug 2011 at 8:17

GoogleCodeExporter commented 9 years ago 
This is the DIP package of the ATmega644 microcontroller (AVR 8-bit series from 
Atmel). Enjoy!

Original comment by macgyver...@gmail.com on 24 Aug 2011 at 4:03

Attachments:

GoogleCodeExporter commented 9 years ago 
@macgyveremir: 

This is a very nice part! Could you make the part in the schematic view a 
little bit bigger (like the Atmega 168) and place the name in the middle? 

I've seen, that you labeled the connections very professional. Would it make 
sense, to write the Pin names behind the pin numbers (in schematic view, too)? 

If you could do this changes, we can take your Part into the Fritzing core 
parts library!

Thank you that far and have a nice week end.

Stefan*
Fritzing.org

Original comment by stefanhermann79@googlemail.com on 27 Aug 2011 at 6:26

GoogleCodeExporter commented 9 years ago 
I made a 6Pin Star Power LED that I had laying around.

Breadboard graphics made by myself, for the schematic view I've altered the 
6Pin LED graphics form fritzing.

Please enjoy! :)

Original comment by Niclas.H...@gmail.com on 27 Aug 2011 at 8:06

Attachments:

GoogleCodeExporter commented 9 years ago 
@Niclas: Very nice! I changed it just a little bit and I guess, you will find 
it in the next Fritzing release :) Good work!

Original comment by stefanhermann79@googlemail.com on 28 Aug 2011 at 8:44

GoogleCodeExporter commented 9 years ago 
Thank you very much! :)

I just discovered that I had the B- and B+ connectors wrong, I interchanged 
them. (All - connectors should on the top of the led and all + connectors 
should be on the bottom).

btw: is there any possibility to rotate connectors? Because some pads on the 
led are rotated, but could'nt figure out, how to make the connectors fit to the 
pads accordingly.

Anyway, great that it will be included :)

Original comment by Niclas.H...@gmail.com on 28 Aug 2011 at 12:14

Attachments:

GoogleCodeExporter commented 9 years ago 
@Niclas: Yes, I've compared it with the datasheet and added the labels today in 
the morning. It should be correct now – so it's no problem.

I think, it is not possible to rotate the connectors in the parts editor, but 
it is on the list and be a part of the redesigned parts editor comming up in 
the future. 

Until that day, we have to make this changes in the SVG files :)

So thank you again for this awesome part!

Original comment by stefanhermann79@googlemail.com on 28 Aug 2011 at 12:48

GoogleCodeExporter commented 9 years ago 
HEF4094 shift register. This is my first part, comments welcome.

Original comment by Sor...@gmail.com on 5 Sep 2011 at 9:57

Attachments:

GoogleCodeExporter commented 9 years ago 
@SorkiG: Good start. The schematic is missing and very important, because much 
people can't read »Breadboard« ;) And finding problems is in schematic view 
much easier. You can add descriptions for pins and the part in general, than it 
is easy to use and understand the part. By now, I would say, you are on a good 
way :)

Best,

Stefan*

Original comment by orgfritz...@gmail.com on 6 Sep 2011 at 6:34

GoogleCodeExporter commented 9 years ago 
Updated the HEF4094, something must have gone wrong with the schematic it's 
included now. Descriptions added.

Original comment by Sor...@gmail.com on 6 Sep 2011 at 11:05

Attachments:

GoogleCodeExporter commented 9 years ago 
@SorkiG: The schematics look very nice. This makes it easy to work with this 
shift register. Unfortunitely this time, the PCV SVG was not included :( If you 
want, you can send me the files via Email and I combine them and check them 
into the next Fritzing Release.

Looking forward to hearing from you.

Stefan*

Original comment by orgfritz...@gmail.com on 6 Sep 2011 at 11:25

GoogleCodeExporter commented 9 years ago 
@SorkiG

Hi.  I'd like to try to track down the missing images problem.  One possible 
cause is if custom svg files are stored in a subfolder of the fritzing/parts 
directory (i.e. the folder that is installed with the fritzing application).  
In this case the fzpz packager will not package the svg because it assumes from 
that location that it is shipped with Fritzing.  (Another reason that custom 
svg files should not be stored in the friting application directory tree is 
that they will be lost when you upgrade Fritzing.)

Please let us know whether this is the issue here.

Thanks.

- j

Original comment by irasc...@gmail.com on 6 Sep 2011 at 11:38

GoogleCodeExporter commented 9 years ago 
@SorkiG: Good news! Your part is checked in and will be in the upcomming 
Fritzing Release. You will find it in the Shift Register part typ. Thank you 
very much :)

Stefan*

Original comment by orgfritz...@gmail.com on 7 Sep 2011 at 10:21

GoogleCodeExporter commented 9 years ago 
I made this part last night (my first). It's the old version Sparkfun RTC 
breakout board as sold here: http://www.sparkfun.com/products/99  

This is just a first draft, but it works for my purposes. Some of the text 
needs to be converted still(I imported a PDF dimensional drawing),the colors 
need a tweak I'm sure, and I kinda phoned in the PCB view. If I kept it to 
myself I'd never finish it off though, so I figured I should post it up here in 
case some else wants to give it some polish before I get around to it.

Original comment by MikeWeat...@gmail.com on 7 Sep 2011 at 3:44

Attachments:

GoogleCodeExporter commented 9 years ago 
@MikeWeatherholtz: Hey, this looks very nice. Maybe, we can include it to the 
Sparkfun library in Fritzing.

Original comment by stefanhermann79@googlemail.com on 7 Sep 2011 at 7:25

GoogleCodeExporter commented 9 years ago 
@stefanhermann79: That's why I uploaded it :) I'm going to fix a few things 
tonight my OCD won't let me ignore, though.

Original comment by MikeWeat...@gmail.com on 7 Sep 2011 at 8:18

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Greetings
I just have made my fist part for Fritzing, It's a Low Dropout Voltage 
Regulator, the peculiarity about it, is that unlike the famous 7805 it has four 
legs, being the fourth to activate it. I used it a lot, because it heated less 
and has only a maximum voltage droput of 0.5V.

I hope you enjoy it

Original comment by johan....@gmail.com on 8 Sep 2011 at 3:47

Attachments:

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Here is version 2 of my Sparkfun RTC breakout board. Fixed the text, fancied up 
the breadboard view and tweaked the pcb view.

Original comment by MikeWeat...@gmail.com on 9 Sep 2011 at 12:53

Attachments:

GoogleCodeExporter commented 9 years ago 
@MikeWeatherholtz: Thank you very much. Your part is checked in and will appear 
in the next release!!

Original comment by stefanhermann79@googlemail.com on 14 Sep 2011 at 9:29

GoogleCodeExporter commented 9 years ago 
@johan... (comment 185).

This part is really close, but it's not quite right. The problem is with 
bendable legs and breadboard view.  The easiest way to see it would be to open 
up voltage_regulator_7805.fzp and compare it side by side with the low dropout 
version. 

In the 7805, one of the connectors is defined so:  
<p layer="breadboard" svgId="connector0pin"  legId="connector0leg"/>

in the low dropout it's so:
<p layer="breadboard" svgId="connector3leg" terminalId="connector3terminal"/>

See the difference?  In general the svgId defines the pin, the legId defines a 
leg structure, and the terminalId defines a position on the pin.  When you have 
a leg, you do not need a terminalId, but you still need a pin.

The breadboard svg will have to be modified as well:  the "leg" elements look 
correct, and I'm not sure whether you can simply get away with renaming the 
"terminal" elements to "pin" or whether you will have to  modify those rects as 
well.

- j

Original comment by irasc...@gmail.com on 14 Sep 2011 at 9:37

GoogleCodeExporter commented 9 years ago 
Hi people,
Im starting a project and would like to use Fritzing, but i need a part that i 
cannot find in the library,
74LS573 - Octal D Latch with 3-STATE Outputs

Regards

Original comment by goncalo....@gmail.com on 16 Sep 2011 at 6:57

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Hi, just did a HCF 4067 analog multiplexer using the generic IC part and 
modifying the descriptioon of the pins. Since I dont have a view of the SMD 
versions I just did the plastic encapsulated version of the chip. Hope someone 
find this useful. Opps, corrected a bit adding a Schematic pinout

Original comment by forvel...@gmail.com on 21 Sep 2011 at 8:28

Attachments:

GoogleCodeExporter commented 9 years ago 
@forvellos: I checked it in and you will see it in the next Fritzing Release. 
It will belong to the 40xx Family :) Thank you for this part!

Original comment by stefanhermann79@googlemail.com on 22 Sep 2011 at 10:32

GoogleCodeExporter commented 9 years ago 
@goncalo (comment 190): use a generic IC part, change the number of pins and 
change the chip label.

Original comment by irasc...@gmail.com on 22 Sep 2011 at 11:37

GoogleCodeExporter commented 9 years ago 
Stefan, I'm sorry for the long delay, I'm uploading the new Atmega644 with 
updated Schematic view, basically a rip-off from the datasheet, as I got kind 
of stuck at the moment of drawing it up. Hope you all like it!

Original comment by macgyver...@gmail.com on 23 Sep 2011 at 2:52

Attachments:

GoogleCodeExporter commented 9 years ago 
Stefan, I'm sorry for the long delay (comment 170), I'm uploading the new 
Atmega644 with updated Schematic view, basically a rip-off from the datasheet, 
as I got kind of stuck at the moment of drawing it up. Hope you all like it!

Original comment by macgyver...@gmail.com on 23 Sep 2011 at 2:52

Attachments:

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
@kungfumachinist and macgyveremir: Your parts are checked in and will be part 
of the next Fritzing! Thank you both very much for this awesome parts :)

Original comment by stefanhermann79@googlemail.com on 26 Sep 2011 at 12:17

GoogleCodeExporter commented 9 years ago 
This is a Triad Magnetics TY-145P 600:600 Ohm transformer - though really it 
could be used for any small centre tapped transformer. This is my first 
Fritzing part and I had difficulties doing it so if there are problems with it 
please feel free to let me know!

Original comment by and...@ugh.net.au on 6 Oct 2011 at 11:27

Attachments:

GoogleCodeExporter commented 9 years ago 
@andrew: Your Transformer part looks very useful and we miss it in our library. 
The schematic view is awesome. The PCB view is missing a silkscreen layer 
(maybe the shape of it?). The breadboard view of the part needs a little bit 
more work. If you could take a look at the Stepper Motor part, you can see, 
that we often try to provide the 2.5D view (not 2D, but not 3D) so the user can 
see, what the part looks like. We would realy like to put this part in the core 
library, if you could make this changes :)

Best,

Stefan"

Original comment by stefanhermann79@googlemail.com on 10 Oct 2011 at 8:45