Closed FSmu closed 1 year ago
As i don't have multiple phases I don't know how that information is outputed. Can you please open http://YOURZTATZLINK/api/v1/phase Do a CTRL + S and save it as a file.
Please upload the file so I can use that as an example
Hi Stefan, P1 monitor is a great app I use it for a couple of years now. I did open "
Van: Stefan Lenders @.> but I don't know what to do with it. Verzonden: zaterdag 13 augustus 2022 09:44 Aan: burnacid/homey-com.burnacid.ztatz @.> CC: FSmu @.>; Author @.> Onderwerp: Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
As i don't have multiple phases I don't know how that information is outputed. Can you please open /api/v1/phase Do a CTRL + S and save it as a file.
Please upload the file so I can use that as an example
- Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1213934717&data=05%7C01%7C%7C1dbb931266a94b4b309108da7cff92bd%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637959734357942976%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=zsXeWp814O4uXM0T6bTeTewBQ879Zs4xCnD1Sy0WoQ4%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGJRPHCFAWFDT47QW7TVY5G3TANCNFSM56NU67AQ&data=05%7C01%7C%7C1dbb931266a94b4b309108da7cff92bd%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637959734357942976%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=tym1gACBz0SpfrJFEAf1wp%2BPoBbH7WdIuSQZAXJY2Ms%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Can you send a screenshot of your Ztatz of the information you are refuring to?
No problem, see attached file. Regards, Frans
Van: Stefan Lenders @.> Verzonden: maandag 15 augustus 2022 15:27 Aan: burnacid/homey-com.burnacid.ztatz @.> CC: FSmu @.>; Author @.> Onderwerp: Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
Can you send a screenshot of your Ztatz of the information you are refuring to?
- Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1215014426&data=05%7C01%7C%7Cabb17dd0f7814f513b5208da7ec1e2ff%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637961668445309202%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=mONcUpsjIUENlFcDPjPmTrl5XH9bBLMNXYphOGoNqt0%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGNEXTOKEY4SPV2GNVLVZJATVANCNFSM56NU67AQ&data=05%7C01%7C%7Cabb17dd0f7814f513b5208da7ec1e2ff%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637961668445309202%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=jUjSsOpMVQeCURvkgZ9SzpCA5%2FCv5SPgyby%2Bn441G5Q%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Please upload it to GitHub as I cannot see the attached file through mail reply
Please upload your https://URL/api/v1/status?json=object
Result of https://url/api/v1/status?json=object
[{"LABEL": "Max dagwaarde Kw verbruik", "SECURITY": 0, "STATUS": "1.864", "STATUS_ID": 1}, {"LABEL": "Max dagwaarde Kw verbruik (timestamp)", "SECURITY": 0, "STATUS": "2022-08-17 08:00:14", "STATUS_ID": 2}, {"LABEL": "Max dagwaarde Kw geleverd", "SECURITY": 0, "STATUS": "0.652", "STATUS_ID": 3}, {"LABEL": "Max dagwaarde Kw geleverd (timestamp)", "SECURITY": 0, "STATUS": "2022-08-17 15:51:54", "STATUS_ID": 4}, {"LABEL": "Tijdstip start van P1 interface(elektrisch):", "SECURITY": 0, "STATUS": "2022-08-09 18:18:14", "STATUS_ID": 5}, {"LABEL": "Tijdstip start database:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:18", "STATUS_ID": 6}, {"LABEL": "Tijdstip laatste verwerkte minuten gegevens:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:04", "STATUS_ID": 7}, {"LABEL": "Huidige dag KWh verbruik dal/nacht dag (1.8.1)", "SECURITY": 0, "STATUS": "1.5490000000008877", "STATUS_ID": 8}, {"LABEL": "Huidige dag KWh verbruik piek/dag (1.8.2)", "SECURITY": 0, "STATUS": "0.51299999999992", "STATUS_ID": 9}, {"LABEL": "Huidige dag KWh geleverd dal/nacht dag (2.8.1)", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 10}, {"LABEL": "Huidige dag KWh geleverd piek/dag (2.8.2)", "SECURITY": 0, "STATUS": "0.6860000000001492", "STATUS_ID": 11}, {"LABEL": "Tijdstip laatste verwerkte uren gegevens:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:04", "STATUS_ID": 12}, {"LABEL": "Tijdstip laatste verwerkte dagen gegevens:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:04", "STATUS_ID": 13}, {"LABEL": "Tijdstip laatste verwerkte maand gegevens:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:04", "STATUS_ID": 14}, {"LABEL": "Tijdstip laatste verwerkte jaar gegevens:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:04", "STATUS_ID": 15}, {"LABEL": "Tijdstip laatste verwerkte bericht uit de slimme meter:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:20", "STATUS_ID": 16}, {"LABEL": "Tijdstip start watchdog:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:29", "STATUS_ID": 17}, {"LABEL": "Processor belasting", "SECURITY": 0, "STATUS": "22.8", "STATUS_ID": 18}, {"LABEL": "Tijd verstreken sinds de laatste herstart:", "SECURITY": 0, "STATUS": "7 dagen 22:24:45", "STATUS_ID": 19}, {"LABEL": "Netwerk LAN IP adres:", "SECURITY": 10, "STATUS": "192.168.178.10", "STATUS_ID": 20}, {"LABEL": "Ramdisk gebruik.", "SECURITY": 0, "STATUS": "25.5", "STATUS_ID": 21}, {"LABEL": "Besturingssysteem versie:", "SECURITY": 10, "STATUS": "Linux-5.10.103-v7+-armv7l-with-debian-10.12", "STATUS_ID": 22}, {"LABEL": "Internet bereikbaar op:", "SECURITY": 10, "STATUS": "2022-08-17 16:09:46", "STATUS_ID": 23}, {"LABEL": "Internet bereikbaar:", "SECURITY": 10, "STATUS": "ja", "STATUS_ID": 24}, {"LABEL": "Python versie:", "SECURITY": 10, "STATUS": "3.7.3", "STATUS_ID": 25}, {"LABEL": "Internet IP adres:", "SECURITY": 0, "STATUS": "80.60.3.173", "STATUS_ID": 26}, {"LABEL": "Internet hostnaam:", "SECURITY": 0, "STATUS": "80-60-3-173.fixed.kpn.net", "STATUS_ID": 27}, {"LABEL": "Netwerk hostnaam:", "SECURITY": 10, "STATUS": "Raspberry-P1mon-F.fritz.box", "STATUS_ID": 28}, {"LABEL": "Tijdstip laatste ram naar disk back-up:", "SECURITY": 0, "STATUS": "2022-08-17 16:31:10", "STATUS_ID": 29}, {"LABEL": "", "SECURITY": 0, "STATUS": "0", "STATUS_ID": 30}, {"LABEL": "RAM geheugen belasting:", "SECURITY": 0, "STATUS": "32.1", "STATUS_ID": 31}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 32}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 33}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 34}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 35}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 36}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 37}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 38}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 39}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 40}, {"LABEL": "Tijdstip laatste ram naar disk back-up(serial):", "SECURITY": 0, "STATUS": "2022-08-17 16:30:58", "STATUS_ID": 41}, {"LABEL": "Netwerk WifI IP adres:", "SECURITY": 10, "STATUS": "onbekend", "STATUS_ID": 42}, {"LABEL": "M3 GAS verbruikt:", "SECURITY": 0, "STATUS": "6045.173", "STATUS_ID": 43}, {"LABEL": "M3 GAS huidige dag verbruikt:", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 44}, {"LABEL": "Tijdstip laatste verwerkte weer gegevens:", "SECURITY": 0, "STATUS": "2022-08-17 16:31:07", "STATUS_ID": 45}, {"LABEL": "P1 data is ok:", "SECURITY": 0, "STATUS": "1", "STATUS_ID": 46}, {"LABEL": "Tijdstip laatste FTP back-up:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 47}, {"LABEL": "FTP back-up start:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 48}, {"LABEL": "Tijdstip laatste succesvol FTP back-up:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 49}, {"LABEL": "Gas verbruik per uur:", "SECURITY": 0, "STATUS": "0.3495145631038292", "STATUS_ID": 50}, {"LABEL": "CPU model:", "SECURITY": 0, "STATUS": "ARMv7 Processor rev 5 (v7l)", "STATUS_ID": 51}, {"LABEL": "CPU hardware:", "SECURITY": 0, "STATUS": "BCM2835", "STATUS_ID": 52}, {"LABEL": "CPU revision:", "SECURITY": 0, "STATUS": "a01041", "STATUS_ID": 53}, {"LABEL": "", "SECURITY": 0, "STATUS": "", "STATUS_ID": 54}, {"LABEL": "Raspberry Pi model:", "SECURITY": 0, "STATUS": "Raspberry Pi 2 Model B Rev 1.1", "STATUS_ID": 55}, {"LABEL": "Tijdstip start UDP daemon:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:28", "STATUS_ID": 56}, {"LABEL": "Tijdstip laatste ram naar disk back-up(verwarming):", "SECURITY": 0, "STATUS": "2022-08-09 18:17:08", "STATUS_ID": 57}, {"LABEL": "Tijdstip laatste verwerkte verwarming gegevens:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 58}, {"LABEL": "Tijdstip laatste dropbox successvolle authenticatie:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 59}, {"LABEL": "Tijdstip laatste Dropbox back-up:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 60}, {"LABEL": "Dropbox back-up start:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 61}, {"LABEL": "Dropbox backup status:", "SECURITY": 0, "STATUS": "Authenticatie gefaald en gestopt.", "STATUS_ID": 62}, {"LABEL": "Tijdstip laatste Dropbox data:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 63}, {"LABEL": "Dropbox data status:", "SECURITY": 0, "STATUS": "", "STATUS_ID": 64}, {"LABEL": "Tijdstip start Dropbox daemon:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:34", "STATUS_ID": 65}, {"LABEL": "Laatste P1 monitor versie:", "SECURITY": 0, "STATUS": "", "STATUS_ID": 66}, {"LABEL": "Laatste P1 monitor versie datum:", "SECURITY": 0, "STATUS": "", "STATUS_ID": 67}, {"LABEL": "Laatste P1 monitor versie tekst:", "SECURITY": 0, "STATUS": "", "STATUS_ID": 68}, {"LABEL": "CPU temperatuur:", "SECURITY": 0, "STATUS": "50.844", "STATUS_ID": 69}, {"LABEL": "Tijdstip start UDP broadcast daemon:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:28", "STATUS_ID": 70}, {"LABEL": "Tijdstip laatste UDP broadcast:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:15", "STATUS_ID": 71}, {"LABEL": "Netwerk LAN MAC adres:", "SECURITY": 10, "STATUS": "B8:27:EB:C7:FD:87", "STATUS_ID": 72}, {"LABEL": "Netwerk Wifi MAC adres:", "SECURITY": 10, "STATUS": "onbekend", "STATUS_ID": 73}, {"LABEL": "Huidige KW verbruik L1 (21.7.0)", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 74}, {"LABEL": "Huidige KW verbruik L2 (41.7.0)", "SECURITY": 0, "STATUS": "0.009", "STATUS_ID": 75}, {"LABEL": "Huidige KW verbruik L3 (61.7.0)", "SECURITY": 0, "STATUS": "0.251", "STATUS_ID": 76}, {"LABEL": "Huidige KW levering L1 (22.7.0)", "SECURITY": 0, "STATUS": "0.12", "STATUS_ID": 77}, {"LABEL": "Huidige KW levering L2 (42.7.0)", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 78}, {"LABEL": "Huidige KW levering L3 (62.7.0)", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 79}, {"LABEL": "weer API status", "SECURITY": 0, "STATUS": "API data succesvol verwerkt.", "STATUS_ID": 80}, {"LABEL": "weer API status timestamp", "SECURITY": 0, "STATUS": "2022-08-17 16:31:07", "STATUS_ID": 81}, {"LABEL": "Tijdstip laatste succesvolle email:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 82}, {"LABEL": "gemiddele watt waarde voor terug levering schakeling, 0 betekent niet actief.", "SECURITY": 0, "STATUS": "0", "STATUS_ID": 83}, {"LABEL": "Tijdstip terug levering, laatste schakeling:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 84}, {"LABEL": "Dal of Piek tarief:", "SECURITY": 0, "STATUS": "P", "STATUS_ID": 85}, {"LABEL": "Laatste P1 monitor versie URL:", "SECURITY": 0, "STATUS": "https://www.ztatz.nl/p1-monitor-download-20220326-v1-6-0/", "STATUS_ID": 86}, {"LABEL": "Tijdstip laatste verwerkte bericht uit de slimme meter (UTC):", "SECURITY": 0, "STATUS": "1660747340", "STATUS_ID": 87}, {"LABEL": "Tijdstip tarief schakeling, laatste schakeling:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 88}, {"LABEL": "tarief schakeling is actief, 0 betekent niet actief.", "SECURITY": 0, "STATUS": "0", "STATUS_ID": 89}, {"LABEL": "Tijdstip laatste verwerkte watermeter puls:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 90}, {"LABEL": "Tijdstip laatste verwerkte watermeterstand reset:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 91}, {"LABEL": "Serial device dat gebruikt wordt:", "SECURITY": 0, "STATUS": "/dev/ttyUSB0", "STATUS_ID": 92}, {"LABEL": "Status automatische data import:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 93}, {"LABEL": "Tijdstip automatische data import:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 94}, {"LABEL": "Tijdstip start MQTT client:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 95}, {"LABEL": "Tijdstip laatste MQTT client bericht:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 96}, {"LABEL": "MQTT client status:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 97}, {"LABEL": "Tijdstip start watermeter:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:41", "STATUS_ID": 98}, {"LABEL": "Tijdstip start GPIO daemon:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:27", "STATUS_ID": 99}, {"LABEL": "Huidige Amperage L1 (31.7.0)", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 100}, {"LABEL": "Huidige Amperage L2 (51.7.0)", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 101}, {"LABEL": "Huidige Amperage L2 (71.7.0)", "SECURITY": 0, "STATUS": "1.0", "STATUS_ID": 102}, {"LABEL": "Huidige Voltage L1 (32.7.0)", "SECURITY": 0, "STATUS": "232.0", "STATUS_ID": 103}, {"LABEL": "Huidige Voltage L2 (52.7.0)", "SECURITY": 0, "STATUS": "233.0", "STATUS_ID": 104}, {"LABEL": "Huidige Voltage L2 (72.7.0)", "SECURITY": 0, "STATUS": "233.0", "STATUS_ID": 105}, {"LABEL": "Tijdstip laatste fase waarde wijziging:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:20", "STATUS_ID": 106}, {"LABEL": "Status van watermeter totaal stand:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 107}, {"LABEL": "Tijdstip start KWh meter productie(S0):", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 108}, {"LABEL": "Tijdstip laatste verwerkte KWh meter productie(S0) puls:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 109}, {"LABEL": "Laatste P1 monitor versie nummer:", "SECURITY": 0, "STATUS": "", "STATUS_ID": 110}, {"LABEL": "Tijdstip laatste verwerkte bericht Solar Edge API:", "SECURITY": 0, "STATUS": "2022-08-17 08:05:23", "STATUS_ID": 111}, {"LABEL": "Tijdstip laatste gefaalde Solar Edge API aanvraag:", "SECURITY": 0, "STATUS": "2022-08-17 07:51:41", "STATUS_ID": 112}, {"LABEL": "Min dagwaarde Kw verbruik", "SECURITY": 0, "STATUS": "0.008", "STATUS_ID": 113}, {"LABEL": "Min dagwaarde Kw verbruik (timestamp)", "SECURITY": 0, "STATUS": "2022-08-17 08:02:10", "STATUS_ID": 114}, {"LABEL": "Min dagwaarde Kw geleverd", "SECURITY": 0, "STATUS": "0.0", "STATUS_ID": 115}, {"LABEL": "Min dagwaarde Kw geleverd (timestamp)", "SECURITY": 0, "STATUS": "2022-08-17 00:00:00", "STATUS_ID": 116}, {"LABEL": "HTTPS certificaat", "SECURITY": 0, "STATUS": "2", "STATUS_ID": 117}, {"LABEL": "HTTPS certificaat vernieuwen certificaat", "SECURITY": 0, "STATUS": "2", "STATUS_ID": 118}, {"LABEL": "Webserver configuratie", "SECURITY": 0, "STATUS": "2", "STATUS_ID": 119}, {"LABEL": "Tijdstip laatste succesvolle certificaat vernieuwing:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 120}, {"LABEL": "Certificaat geldig tot:", "SECURITY": 0, "STATUS": "onbekend", "STATUS_ID": 121}, {"LABEL": "Default gateway/router:", "SECURITY": 0, "STATUS": "192.168.178.1", "STATUS_ID": 122}, {"LABEL": "P1 data is actief(timeout)", "SECURITY": 0, "STATUS": "1", "STATUS_ID": 123}, {"LABEL": "JSON status van NTP netwerktijd", "SECURITY": 0, "STATUS": "{\"timezone\": \"Europe/Amsterdam\", \"ntp_synchronized\": true, \"ntp\": true, \"ntp_server_name\": \"2.debian.pool.ntp.org\", \"ntp_server_ip\": \"129.250.35.251\", \"ntp_last_timestamp\": \"2022-08-17 16:19:38\"}", "STATUS_ID": 124}, {"LABEL": "P1 telegram tijd delta", "SECURITY": 0, "STATUS": "20", "STATUS_ID": 125}, {"LABEL": "Tijdstip start notificatie:", "SECURITY": 0, "STATUS": "2022-08-09 18:18:28", "STATUS_ID": 126}, {"LABEL": "Tijdstip laatste verwerkte financiële dag gegevens:", "SECURITY": 0, "STATUS": "2022-08-17 16:42:05", "STATUS_ID": 127}]
[
{
"LABEL": "Huidige KW verbruik L1 (21.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 74
},
{
"LABEL": "Huidige KW verbruik L2 (41.7.0)",
"SECURITY": 0,
"STATUS": "0.009",
"STATUS_ID": 75
},
{
"LABEL": "Huidige KW verbruik L3 (61.7.0)",
"SECURITY": 0,
"STATUS": "0.251",
"STATUS_ID": 76
},
{
"LABEL": "Huidige KW levering L1 (22.7.0)",
"SECURITY": 0,
"STATUS": "0.12",
"STATUS_ID": 77
},
{
"LABEL": "Huidige KW levering L2 (42.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 78
},
{
"LABEL": "Huidige KW levering L3 (62.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 79
},
{
"LABEL": "Huidige Amperage L1 (31.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 100
},
{
"LABEL": "Huidige Amperage L2 (51.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 101
},
{
"LABEL": "Huidige Amperage L2 (71.7.0)",
"SECURITY": 0,
"STATUS": "1.0",
"STATUS_ID": 102
},
{
"LABEL": "Huidige Voltage L1 (32.7.0)",
"SECURITY": 0,
"STATUS": "232.0",
"STATUS_ID": 103
},
{
"LABEL": "Huidige Voltage L2 (52.7.0)",
"SECURITY": 0,
"STATUS": "233.0",
"STATUS_ID": 104
},
{
"LABEL": "Huidige Voltage L2 (72.7.0)",
"SECURITY": 0,
"STATUS": "233.0",
"STATUS_ID": 105
}
]
The following fields would probably be what you are looking for. What I find weird is that I miss voltage and amperage of L3
I'll have to see when I will be available to create this new "device" for the app. I keep you posted
Stefan,
You are right about the missing L3 info, I did a check and I miss also this info of fase L3. On the normal P1 monitor screen the information of fase L3 is there.
Regards,
Frans Smulders
Van: Stefan Lenders @.> Verzonden: maandag 22 augustus 2022 19:34 Aan: burnacid/homey-com.burnacid.ztatz @.> CC: FSmu @.>; Author @.> Onderwerp: Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
[
{
"LABEL": "Huidige KW verbruik L1 (21.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 74
},
{
"LABEL": "Huidige KW verbruik L2 (41.7.0)",
"SECURITY": 0,
"STATUS": "0.009",
"STATUS_ID": 75
},
{
"LABEL": "Huidige KW verbruik L3 (61.7.0)",
"SECURITY": 0,
"STATUS": "0.251",
"STATUS_ID": 76
},
{
"LABEL": "Huidige KW levering L1 (22.7.0)",
"SECURITY": 0,
"STATUS": "0.12",
"STATUS_ID": 77
},
{
"LABEL": "Huidige KW levering L2 (42.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 78
},
{
"LABEL": "Huidige KW levering L3 (62.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 79
},
{
"LABEL": "Huidige Amperage L1 (31.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 100
},
{
"LABEL": "Huidige Amperage L2 (51.7.0)",
"SECURITY": 0,
"STATUS": "0.0",
"STATUS_ID": 101
},
{
"LABEL": "Huidige Amperage L2 (71.7.0)",
"SECURITY": 0,
"STATUS": "1.0",
"STATUS_ID": 102
},
{
"LABEL": "Huidige Voltage L1 (32.7.0)",
"SECURITY": 0,
"STATUS": "232.0",
"STATUS_ID": 103
},
{
"LABEL": "Huidige Voltage L2 (52.7.0)",
"SECURITY": 0,
"STATUS": "233.0",
"STATUS_ID": 104
},
{
"LABEL": "Huidige Voltage L2 (72.7.0)",
"SECURITY": 0,
"STATUS": "233.0",
"STATUS_ID": 105
}
]
The following fields would probably be what you are looking for. What I find weird is that I miss voltage and amperage of L3
I'll have to see when I will be available to create this new "device" for the app. I keep you posted
- Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1222682285&data=05%7C01%7C%7C67bce0dd6e014598ce7c08da84648c1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637967864625901649%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vnx4NQL0CQQU8nT5keT%2B%2B8uFaOVC%2BiKlFZQinan5wRg%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGKACXGGYN5W2RWKOCLV2O2ZXANCNFSM56NU67AQ&data=05%7C01%7C%7C67bce0dd6e014598ce7c08da84648c1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637967864625901649%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=xBZ01%2FhMYnrCj7kL6pE35x0YucNxR1WRKDtt4kudFN4%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Which is weird because the P1 mon screen actually gets that data from making the same API request
Can you to check send me also an output of https://url/api/v1/status
[[1, "2.532", "Max dagwaarde Kw verbruik", 0], [2, "2022-08-23 11:48:54", "Max dagwaarde Kw verbruik (timestamp)", 0], [3, "2.036", "Max dagwaarde Kw geleverd", 0], [4, "2022-08-23 12:10:57", "Max dagwaarde Kw geleverd (timestamp)", 0], [5, "2022-08-09 18:18:14", "Tijdstip start van P1 interface(elektrisch):", 0], [6, "2022-08-09 18:18:18", "Tijdstip start database:", 0], [7, "2022-08-23 12:29:05", "Tijdstip laatste verwerkte minuten gegevens:", 0], [8, "1.3539999999993597", "Huidige dag KWh verbruik dal/nacht dag (1.8.1)", 0], [9, "0.4489999999996144", "Huidige dag KWh verbruik piek/dag (1.8.2)", 0], [10, "0.0", "Huidige dag KWh geleverd dal/nacht dag (2.8.1)", 0], [11, "1.6990000000000691", "Huidige dag KWh geleverd piek/dag (2.8.2)", 0], [12, "2022-08-23 12:29:05", "Tijdstip laatste verwerkte uren gegevens:", 0], [13, "2022-08-23 12:29:05", "Tijdstip laatste verwerkte dagen gegevens:", 0], [14, "2022-08-23 12:29:05", "Tijdstip laatste verwerkte maand gegevens:", 0], [15, "2022-08-23 12:29:05", "Tijdstip laatste verwerkte jaar gegevens:", 0], [16, "2022-08-23 12:29:58", "Tijdstip laatste verwerkte bericht uit de slimme meter:", 0], [17, "2022-08-09 18:18:29", "Tijdstip start watchdog:", 0], [18, "16.1", "Processor belasting", 0], [19, "13 dagen 18:12:28", "Tijd verstreken sinds de laatste herstart:", 0], [20, "192.168.178.10", "Netwerk LAN IP adres:", 10], [21, "25.5", "Ramdisk gebruik.", 0], [22, "Linux-5.10.103-v7+-armv7l-with-debian-10.12", "Besturingssysteem versie:", 10], [23, "2022-08-23 11:41:18", "Internet bereikbaar op:", 10], [24, "ja", "Internet bereikbaar:", 10], [25, "3.7.3", "Python versie:", 10], [26, "80.60.3.173", "Internet IP adres:", 0], [27, "80-60-3-173.fixed.kpn.net", "Internet hostnaam:", 0], [28, "Raspberry-P1mon-F.fritz.box", "Netwerk hostnaam:", 10], [29, "2022-08-23 12:16:10", "Tijdstip laatste ram naar disk back-up:", 0], [30, "0", "", 0], [31, "31.8", "RAM geheugen belasting:", 0], [32, "", "", 0], [33, "", "", 0], [34, "", "", 0], [35, "", "", 0], [36, "", "", 0], [37, "", "", 0], [38, "", "", 0], [39, "", "", 0], [40, "", "", 0], [41, "2022-08-23 12:15:17", "Tijdstip laatste ram naar disk back-up(serial):", 0], [42, "onbekend", "Netwerk WifI IP adres:", 10], [43, "6045.946", "M3 GAS verbruikt:", 0], [44, "0.0", "M3 GAS huidige dag verbruikt:", 0], [45, "2022-08-23 12:16:07", "Tijdstip laatste verwerkte weer gegevens:", 0], [46, "1", "P1 data is ok:", 0], [47, "onbekend", "Tijdstip laatste FTP back-up:", 0], [48, "onbekend", "FTP back-up start:", 0], [49, "onbekend", "Tijdstip laatste succesvol FTP back-up:", 0], [50, "1.660606060602621", "Gas verbruik per uur:", 0], [51, "ARMv7 Processor rev 5 (v7l)", "CPU model:", 0], [52, "BCM2835", "CPU hardware:", 0], [53, "a01041", "CPU revision:", 0], [54, "", "", 0], [55, "Raspberry Pi 2 Model B Rev 1.1", "Raspberry Pi model:", 0], [56, "2022-08-09 18:18:28", "Tijdstip start UDP daemon:", 0], [57, "2022-08-09 18:17:08", "Tijdstip laatste ram naar disk back-up(verwarming):", 0], [58, "onbekend", "Tijdstip laatste verwerkte verwarming gegevens:", 0], [59, "onbekend", "Tijdstip laatste dropbox successvolle authenticatie:", 0], [60, "onbekend", "Tijdstip laatste Dropbox back-up:", 0], [61, "onbekend", "Dropbox back-up start:", 0], [62, "Authenticatie gefaald en gestopt.", "Dropbox backup status:", 0], [63, "onbekend", "Tijdstip laatste Dropbox data:", 0], [64, "", "Dropbox data status:", 0], [65, "2022-08-09 18:18:34", "Tijdstip start Dropbox daemon:", 0], [66, "", "Laatste P1 monitor versie:", 0], [67, "", "Laatste P1 monitor versie datum:", 0], [68, "", "Laatste P1 monitor versie tekst:", 0], [69, "48.692", "CPU temperatuur:", 0], [70, "2022-08-09 18:18:28", "Tijdstip start UDP broadcast daemon:", 0], [71, "2022-08-23 12:29:58", "Tijdstip laatste UDP broadcast:", 0], [72, "B8:27:EB:C7:FD:87", "Netwerk LAN MAC adres:", 10], [73, "onbekend", "Netwerk Wifi MAC adres:", 10], [74, "0.0", "Huidige KW verbruik L1 (21.7.0)", 0], [75, "0.008", "Huidige KW verbruik L2 (41.7.0)", 0], [76, "0.251", "Huidige KW verbruik L3 (61.7.0)", 0], [77, "1.887", "Huidige KW levering L1 (22.7.0)", 0], [78, "0.0", "Huidige KW levering L2 (42.7.0)", 0], [79, "0.0", "Huidige KW levering L3 (62.7.0)", 0], [80, "API data succesvol verwerkt.", "weer API status", 0], [81, "2022-08-23 12:16:07", "weer API status timestamp", 0], [82, "onbekend", "Tijdstip laatste succesvolle email:", 0], [83, "0", "gemiddele watt waarde voor terug levering schakeling, 0 betekent niet actief.", 0], [84, "onbekend", "Tijdstip terug levering, laatste schakeling:", 0], [85, "P", "Dal of Piek tarief:", 0], [86, "https://www.ztatz.nl/p1-monitor-download-20220326-v1-6-0/", "Laatste P1 monitor versie URL:", 0], [87, "1661250598", "Tijdstip laatste verwerkte bericht uit de slimme meter (UTC):", 0], [88, "onbekend", "Tijdstip tarief schakeling, laatste schakeling:", 0], [89, "0", "tarief schakeling is actief, 0 betekent niet actief.", 0], [90, "onbekend", "Tijdstip laatste verwerkte watermeter puls:", 0], [91, "onbekend", "Tijdstip laatste verwerkte watermeterstand reset:", 0], [92, "/dev/ttyUSB0", "Serial device dat gebruikt wordt:", 0], [93, "onbekend", "Status automatische data import:", 0], [94, "onbekend", "Tijdstip automatische data import:", 0], [95, "onbekend", "Tijdstip start MQTT client:", 0], [96, "onbekend", "Tijdstip laatste MQTT client bericht:", 0], [97, "onbekend", "MQTT client status:", 0], [98, "2022-08-09 18:18:41", "Tijdstip start watermeter:", 0], [99, "2022-08-09 18:18:27", "Tijdstip start GPIO daemon:", 0], [100, "8.0", "Huidige Amperage L1 (31.7.0)", 0], [101, "0.0", "Huidige Amperage L2 (51.7.0)", 0], [102, "1.0", "Huidige Amperage L2 (71.7.0)", 0], [103, "233.0", "Huidige Voltage L1 (32.7.0)", 0], [104, "234.0", "Huidige Voltage L2 (52.7.0)", 0], [105, "233.0", "Huidige Voltage L2 (72.7.0)", 0], [106, "2022-08-23 12:29:58", "Tijdstip laatste fase waarde wijziging:", 0], [107, "onbekend", "Status van watermeter totaal stand:", 0], [108, "onbekend", "Tijdstip start KWh meter productie(S0):", 0], [109, "onbekend", "Tijdstip laatste verwerkte KWh meter productie(S0) puls:", 0], [110, "", "Laatste P1 monitor versie nummer:", 0], [111, "2022-08-17 08:05:23", "Tijdstip laatste verwerkte bericht Solar Edge API:", 0], [112, "2022-08-17 07:51:41", "Tijdstip laatste gefaalde Solar Edge API aanvraag:", 0], [113, "0.009", "Min dagwaarde Kw verbruik", 0], [114, "2022-08-23 08:04:39", "Min dagwaarde Kw verbruik (timestamp)", 0], [115, "0.0", "Min dagwaarde Kw geleverd", 0], [116, "2022-08-23 00:00:00", "Min dagwaarde Kw geleverd (timestamp)", 0], [117, "2", "HTTPS certificaat", 0], [118, "2", "HTTPS certificaat vernieuwen certificaat", 0], [119, "2", "Webserver configuratie", 0], [120, "onbekend", "Tijdstip laatste succesvolle certificaat vernieuwing:", 0], [121, "onbekend", "Certificaat geldig tot:", 0], [122, "192.168.178.1", "Default gateway/router:", 0], [123, "1", "P1 data is actief(timeout)", 0], [124, "{\"timezone\": \"Europe/Amsterdam\", \"ntp_synchronized\": true, \"ntp\": true, \"ntp_server_name\": \"2.debian.pool.ntp.org\", \"ntp_server_ip\": \"129.250.35.251\", \"ntp_last_timestamp\": \"2022-08-23 12:17:28\"}", "JSON status van NTP netwerktijd", 0], [125, "22", "P1 telegram tijd delta", 0], [126, "2022-08-09 18:18:28", "Tijdstip start notificatie:", 0], [127, "2022-08-23 12:29:05", "Tijdstip laatste verwerkte financiële dag gegevens:", 0]]
I did the upload.
Van: Stefan Lenders @.> Verzonden: dinsdag 23 augustus 2022 08:52 Aan: burnacid/homey-com.burnacid.ztatz @.> CC: FSmu @.>; Author @.> Onderwerp: Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
Which is weird because the P1 mon screen actually gets that data from making the same API request [2022-08-23 08_49_41-P1monitor actueel fase - Personal - Microsoft? Edge]https://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fuser-images.githubusercontent.com%2F852616%2F186090421-ae6ddfc6-82c6-466d-b8e1-8e79719f7484.png&data=05%7C01%7C%7C25575eb62608412b252c08da84d40215%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637968343347910503%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=SpUETYU74qameB1bFhykpvxrVjiCUqgQ7sitWcIxFT8%3D&reserved=0
Can you to check send me also an output of https://url/api/v1/status
- Reply to this email directly, view it on GitHubhttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1223629439&data=05%7C01%7C%7C25575eb62608412b252c08da84d40215%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637968343347910503%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Ie6NQVf%2BSwiqNVhHyCyvPldZ%2FgLVSOlqNbGDBr63mXU%3D&reserved=0, or unsubscribehttps://nam12.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGKIC4EW2ZYCYWFGNCLV2RYJZANCNFSM56NU67AQ&data=05%7C01%7C%7C25575eb62608412b252c08da84d40215%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637968343347910503%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2F0Js%2Fzlx9oHaW5M%2ByGPYvpZntBojPJ39AB1p1wlp1hk%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.**@.>>
Sorry haven't found time yet to really deep into this yet. But I guess phase 3 is calculated from subtracting the phase 1 and 2 from the total maybe. Will get back on this soon
No problem, i have a temporary workaround so i can wait.
Regards Frans
------ Oorspronkelijke bericht ------ Van "Stefan Lenders" @.> Aan "burnacid/homey-com.burnacid.ztatz" @.> CC "FSmu" @.>; "Author" @.> Datum 3-12-2022 11:35:34 Onderwerp Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
Sorry haven't found time yet to really deep into this yet. But I guess phase 3 is calculated from subtracting the phase 1 and 2 from the total maybe. Will get back on this soon
— Reply to this email directly, view it on GitHub https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1336131414&data=05%7C01%7C%7C1ec34253dbfd4e8c7d2208dad51a1c17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056605369897385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=B8IngT1uf1UPeN9%2FZspDMLi%2FA9dsm6nBE%2BuP69dzzhE%3D&reserved=0, or unsubscribe https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGJTKTODRGC2357IHQLWLMO7NANCNFSM56NU67AQ&data=05%7C01%7C%7C1ec34253dbfd4e8c7d2208dad51a1c17%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056605369897385%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=wwvTtXZnnip5lqdAULL447skWgMnGToX1JkFBrBWpIE%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>
Never mind, I see ZTATZ named it wrong. There are 2 Voltage L2 and 2 Amperage L2. Looking at the OBIS reference they are actually L3. What version of Ztatz have you currently running?
Latest 2.1.0
------ Oorspronkelijke bericht ------ Van "Stefan Lenders" @.> Aan "burnacid/homey-com.burnacid.ztatz" @.> CC "FSmu" @.>; "Author" @.> Datum 3-12-2022 11:49:25 Onderwerp Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
Never mind, I see ZTATZ named it wrong. There are 2 Voltage L2 and 2 Amperage L2. Looking at the OBIS reference they are actually L3. What version of Ztatz have you currently running?
— Reply to this email directly, view it on GitHub https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1336133328&data=05%7C01%7C%7C4893150242354b5e4ebe08dad51c0bc9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056613683544195%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=T6inUSPmUI5iwcYKNMN134K1tHbxrEqbVrxoOBQVVYY%3D&reserved=0, or unsubscribe https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGLREDFGMIBDGKQOYSLWLMQTLANCNFSM56NU67AQ&data=05%7C01%7C%7C4893150242354b5e4ebe08dad51c0bc9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056613683544195%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=27kXatqubyKbBKAP9Yu5PLiixo8ae2aLZ66DdcflDzo%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>
Could you confirm that ZTATZ displays the current usage as the cumulative wattage of all phases for you?
Yes, i see the information of all phases, but i see not only the current but also a calculated current (little calculator symbol). In the attached picture you can see it.
Let me know if you need more information,
Regards,
Frans Smulders
------ Oorspronkelijke bericht ------ Van "Stefan Lenders" @.> Aan "burnacid/homey-com.burnacid.ztatz" @.> CC "FSmu" @.>; "Author" @.> Datum 3-12-2022 18:31:16 Onderwerp Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
Could you confirm that ZTATZ displays the current usage as the cumulative wattage of all phases for you?
— Reply to this email directly, view it on GitHub https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1336203637&data=05%7C01%7C%7C549a8b54f0a24a8b6c7d08dad5542f74%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056854795649741%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=hAhZXKG3AOHVQjCcGpT%2FmibXimOmkFZma0CkTp%2BVjII%3D&reserved=0, or unsubscribe https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGK4YQGGXP72SE2WURDWLN7WJANCNFSM56NU67AQ&data=05%7C01%7C%7C549a8b54f0a24a8b6c7d08dad5542f74%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638056854795649741%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=rkhZ5VlRsjxvu3xerCDR16AJFFNVlUkSCC50OXQlM3E%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>
Can you give this test version a try? https://homey.app/nl-nl/app/com.burnacid.ztatz/ZTATZ/test/ I've added a new "device" called P1 Phases.
Please take note that within the advanced settings you can set it to use calculated amperage if you need that
Hi Stefan, I installed the test version and it looks like the values on the device Phases in Homey are the same as i see in the P1 monitor app. I can do some more tests with flow in de next days.
Regards, Frans Smulders
------ Oorspronkelijke bericht ------ Van "Stefan Lenders" @.> Aan "burnacid/homey-com.burnacid.ztatz" @.> CC "FSmu" @.>; "Author" @.> Datum 4-12-2022 09:07:58 Onderwerp Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
Can you give this test version a try? https://homey.app/nl-nl/app/com.burnacid.ztatz/ZTATZ/test/ https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fhomey.app%2Fnl-nl%2Fapp%2Fcom.burnacid.ztatz%2FZTATZ%2Ftest%2F&data=05%7C01%7C%7C6e3543f7a3f040cb3f4008dad5cea895%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638057380813844910%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=hQuSPK0tfR2jKW7eMlBkrGoLxLEjpP88N6y3cbIQ7pk%3D&reserved=0 I've added a new "device" called P1 Phases.
Please take note that within the advanced settings you can set it to use calculated amperage if you need that
— Reply to this email directly, view it on GitHub https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1336345803&data=05%7C01%7C%7C6e3543f7a3f040cb3f4008dad5cea895%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638057380813844910%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=gUq0hx5dxaMaAcPjDMUifAKaREt%2BMKpfCImGuWQafeo%3D&reserved=0, or unsubscribe https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGMP77HUX5S2DIKBHM3WLRGN5ANCNFSM56NU67AQ&data=05%7C01%7C%7C6e3543f7a3f040cb3f4008dad5cea895%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638057380813844910%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Wa%2FHRZHzKyIxe5cizX3oyFODhOT8c%2BNlLIfL%2F%2BICxTs%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>
Hi Stefan, i did some testing of Phases and found a few things that are textually wrong or not working. I attached some pictures that shows you the things i found. I can do some more testing if you like. Regards, Frans Smulders
------ Oorspronkelijke bericht ------ Van "Stefan Lenders" @.> Aan "burnacid/homey-com.burnacid.ztatz" @.> CC "FSmu" @.>; "Author" @.> Datum 4-12-2022 09:07:58 Onderwerp Re: [burnacid/homey-com.burnacid.ztatz] [REQ] P1 monitor gives used power per phase, but that information is not available in "P1 usage", is it possible to add it? (Issue #48)
Can you give this test version a try? https://homey.app/nl-nl/app/com.burnacid.ztatz/ZTATZ/test/ https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fhomey.app%2Fnl-nl%2Fapp%2Fcom.burnacid.ztatz%2FZTATZ%2Ftest%2F&data=05%7C01%7C%7C6e3543f7a3f040cb3f4008dad5cea895%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638057380813844910%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=hQuSPK0tfR2jKW7eMlBkrGoLxLEjpP88N6y3cbIQ7pk%3D&reserved=0 I've added a new "device" called P1 Phases.
Please take note that within the advanced settings you can set it to use calculated amperage if you need that
— Reply to this email directly, view it on GitHub https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fburnacid%2Fhomey-com.burnacid.ztatz%2Fissues%2F48%23issuecomment-1336345803&data=05%7C01%7C%7C6e3543f7a3f040cb3f4008dad5cea895%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638057380813844910%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=gUq0hx5dxaMaAcPjDMUifAKaREt%2BMKpfCImGuWQafeo%3D&reserved=0, or unsubscribe https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAIEGKGMP77HUX5S2DIKBHM3WLRGN5ANCNFSM56NU67AQ&data=05%7C01%7C%7C6e3543f7a3f040cb3f4008dad5cea895%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638057380813844910%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Wa%2FHRZHzKyIxe5cizX3oyFODhOT8c%2BNlLIfL%2F%2BICxTs%3D&reserved=0. You are receiving this because you authored the thread.Message ID: @.***>
Sorry I can't see the pictures you attach via a mail reply to github. Can you please upload them directly to Github please. Thx
Last picture should be two time L3 instead of L2
What is wrong with the first picture? The others I understand
The power stays always on zero Watt.
That is weird... For me L1 Watt works perfect. I've made some change. Please try again.
https://homey.app/a/com.burnacid.ztatz/test/
If it remains 0 please send me and export of http://YOURZTATZP1URL/api/v1/status?json=object
Works fine now i tested all triggers and they work ok. Thank you very much for making this possible.
Version 0.7.1 released
Hi Stefan, the link to your Paypal account on the Homey apps site does not work. Regards, Frans
Is your feature request related to a problem? Please describe. A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
Describe the solution you'd like A clear and concise description of what you want to happen.
Describe alternatives you've considered A clear and concise description of any alternative solutions or features you've considered.
Additional context Add any other context or screenshots about the feature request here.