Open BerndGaykema opened 1 month ago
Could you explain this flowcard further? Is this an When, And or Then card? What should this flow card do? As from what you describe doesn't tell me enough to make something usefull
Hoi Stefan,
WHEN
As S0-value is higher / lower than xxx W …. (Current power) As S0-value is higher / lower than xxx Wh … (Total energy over the last minute)
AND The S0-value is higher / lower than xxx W The S0-value is higher / lower than xxx Wh (one minute)
THEN Not needed.
With the current power or the one-minute energy value it is possible to do different things:
I now have Sessy, a home battery with NOM (nul op de meter). This battery is then a master, taking solar energy away before other equipment like hot water boilers can use that energy. With the solar-value and the P1-value I can Homey let make decisions which comes first, also dependent of the time etc.
The opposite is also here. My WallBox Pulsar Plus ev-charger is a slave. It only charges the car when there is enough Green energy available. Everything else is superior over the car charger. But when it is important that the battery level of the car is 80% at a certain time I can let Homey play with the available solar energy to distribute over more equipment to make the best out of it.
With only the actual P1-value it is not possible to make decisions, with both P1 and Solar-value it can.
Thank you, Bernd
Van: Stefan Lenders @.> Verzonden: zondag 4 augustus 2024 13:05 Aan: burnacid/homey-com.burnacid.ztatz @.> CC: Bernd Gaykema @.>; Author @.> Onderwerp: Re: [burnacid/homey-com.burnacid.ztatz] REQUEST ; adding flowcard for solar energie (S0) (Issue #71)
Could you explain this flowcard further? Is this an When, And or Then card? What should this flow card do? As from what you describe doesn't tell me enough to make something usefull
— Reply to this email directly, view it on GitHub https://github.com/burnacid/homey-com.burnacid.ztatz/issues/71#issuecomment-2267501391 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AIOB4YEL34BQBUGL6FEVBPLZPYDFDAVCNFSM6AAAAABL6XRZTGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRXGUYDCMZZGE . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AIOB4YAOFB3YYGZH2ZXAKQDZPYDFDA5CNFSM6AAAAABL6XRZTGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTUHE5JU6.gif Message ID: @. @.> >
I honestly don't know what this S0 value is. Please know I no longer use ZTATZ. But I can update the app if I know what this value is.
Sorry Stefan,
S0 is the solar-energy counter which makes use of the S0-output of a 1- or 3-phase energy meter (pulse counter). Each pulse is a certain kWh value, see attached picture S0.png.
On the Home page of P1-monitor you can select this view by clicking on the green circled button., see picture Home_S0.png
Hope this helps..
Thank you very much for your help, Met vriendelijke groet, Bernd Gaykema
Van: Stefan Lenders @.> Verzonden: zondag 4 augustus 2024 19:58 Aan: burnacid/homey-com.burnacid.ztatz @.> CC: Bernd Gaykema @.>; Author @.> Onderwerp: Re: [burnacid/homey-com.burnacid.ztatz] REQUEST ; adding flowcard for solar energie (S0) (Issue #71)
I honestly don't know what this S0 value is. Please know I no longer use ZTATZ. But I can update the app if I know what this value is.
— Reply to this email directly, view it on GitHub https://github.com/burnacid/homey-com.burnacid.ztatz/issues/71#issuecomment-2267620861 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AIOB4YHGDZPYRROPXNU4H23ZPZTTBAVCNFSM6AAAAABL6XRZTGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRXGYZDAOBWGE . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AIOB4YAU6Q6P75674S2H7LLZPZTTBA5CNFSM6AAAAABL6XRZTGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTUHFES72.gif Message ID: @. @.> >
Images send via mail over github don't show. please upload them to the issue
------ Original Message ------ From "Bernd Gaykema" @.> To "burnacid/homey-com.burnacid.ztatz" @.> Cc "Stefan Lenders" @.>; "Comment" @.> Date 8/4/2024 9:42:44 PM Subject Re: [burnacid/homey-com.burnacid.ztatz] REQUEST ; adding flowcard for solar energie (S0) (Issue #71)
Sorry Stefan,
S0 is the solar-energy counter which makes use of the S0-output of a 1- or 3-phase energy meter (pulse counter). Each pulse is a certain kWh value, see attached picture S0.png.
On the Home page of P1-monitor you can select this view by clicking on the green circled button., see picture Home_S0.png
Hope this helps..
Thank you very much for your help, Met vriendelijke groet, Bernd Gaykema
Van: Stefan Lenders @.> Verzonden: zondag 4 augustus 2024 19:58 Aan: burnacid/homey-com.burnacid.ztatz @.> CC: Bernd Gaykema @.>; Author @.> Onderwerp: Re: [burnacid/homey-com.burnacid.ztatz] REQUEST ; adding flowcard for solar energie (S0) (Issue #71)
I honestly don't know what this S0 value is. Please know I no longer use ZTATZ. But I can update the app if I know what this value is.
— Reply to this email directly, view it on GitHub https://github.com/burnacid/homey-com.burnacid.ztatz/issues/71#issuecomment-2267620861 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AIOB4YHGDZPYRROPXNU4H23ZPZTTBAVCNFSM6AAAAABL6XRZTGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRXGYZDAOBWGE . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AIOB4YAU6Q6P75674S2H7LLZPZTTBA5CNFSM6AAAAABL6XRZTGWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTUHFES72.gif Message ID: @. @.> >
— Reply to this email directly, view it on GitHub https://github.com/burnacid/homey-com.burnacid.ztatz/issues/71#issuecomment-2267647864, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAGQFCCTPA7XJKI4CLMZKK3ZPZ73JAVCNFSM6AAAAABL6XRZTGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENRXGY2DOOBWGQ. You are receiving this because you commented.Message ID: @.***>
My pictures. Sorry, I was not aware that I was replying within github. For me it was an email ....
To make it possible for me to create anything I need to know where in the API this can be found. And receive an example of that data. Are you able to supply that?
As we are more and more forced to use our own solar energy as much as possible it would be very handy to have the actual solar-value available for smart automation. With the current P1-delivery value it is not possible to make the right decissions.
Therefor I would like to ask you to make a flow card available for the actual "Solar kW opgewek (S0)" value.
Thank you very much.