Closed dbezhetskov closed 1 year ago
How was the wasm file produced?
@bjorn3
It is a compiled c++ program and it was preinitialized with wizer (https://github.com/bytecodealliance/wizer).
btw, without -g
wasmtime works as expected with the .wasm module.
It may be that wasmtime doesn't handle correct debuginfo or it may be that wizer causes the debuginfo to get corrupted.
cc: @fitzgen?
I compiled a C program without using Wizer and I have encountered the same crash. Here is a zip folder containing the WASM file that causes the crash:
wasmtime_crash_testcase.zip
I am using the wasmtime
crate directly. It only panics if debug_info(true)
is set when creating the Engine
.
I am running into this as well! It looks like if I revert to wasmtime 1.0.2
or earlier I do not see this assertion failure. wasmtime 2.0.0
and later result in the assertion failure in my case.
I see the progress in https://github.com/bytecodealliance/wasmtime/pull/5553 and am watching closely! I am not a wasmtime poweruser, but if I can help make progress here I am happy to.
It looks like if I revert to
wasmtime 1.0.2
or earlier I do not see this assertion failure.wasmtime 2.0.0
and later result in the assertion failure in my case.
I'm surprised to hear that. Since Wasmtime 1.0 was released months after the first time this issue was reported, I'd have expected you'd encounter the same issue in that version.
@adv-sw the bug described here can occur even without using the C API, so it doesn't make sense that a change in the c-api
crate would have caused it. Can you say more why you think this is the case?
I'm surprised to hear that. Since Wasmtime 1.0 was released months after the first time this issue was reported, I'd have expected you'd encounter the same issue in that version.
I was surprised to see that as well.... I can try to provide more context shortly.
I have run into this issue (along with another, much simpler one) and investigated the cause a bit.
This is not a bug in the DWARF-related code, since the instruction offset data is fed to it by the code generator. The code generator, in turn, obtains this data when emitting instructions in a linear walk. It turns out that in this walk, prior recorded offsets can become invalidated by branch shortening (optimize_branches
), leading to the invalid start > end
ranges:
MachBuffer: use_label_at_offset: offset 95 label MachLabel(3) kind JmpRel32
emitting block Block(3)
MachBuffer: bind label MachLabel(3) at offset 99
enter optimize_branches:
b = [MachBranch { start: 78, end: 84, target: MachLabel(2), fixup: 1, inverted: Some([15, 132, 0, 0, 0, 0]), labels_at_this_branch: [] }, MachBranch { start: 89, end: 94, target: MachLabel(3), fixup: 2, inverted: None, labels_at_this_branch: [] }, MachBranch { start: 94, end: 99, target: MachLabel(3), fixup: 3, inverted: None, labels_at_this_branch: [MachLabel(2)] }]
l = [MachLabel(3)]
f = [MachLabelFixup { label: MachLabel(4), offset: 16, kind: JmpRel32 }, MachLabelFixup { label: MachLabel(2), offset: 80, kind: JmpRel32 }, MachLabelFixup { label: MachLabel(3), offset: 90, kind: JmpRel32 }, MachLabelFixup { label: MachLabel(3), offset: 95, kind: JmpRel32 }]
optimize_branches: last branch MachBranch { start: 94, end: 99, target: MachLabel(3), fixup: 3, inverted: None, labels_at_this_branch: [MachLabel(2)] } at off 99
branch with target == cur off; truncating
truncate_last_branch: truncated MachBranch { start: 94, end: 99, target: MachLabel(3), fixup: 3, inverted: None, labels_at_this_branch: [MachLabel(2)] }; off now 94
optimize_branches: last branch MachBranch { start: 89, end: 94, target: MachLabel(3), fixup: 2, inverted: None, labels_at_this_branch: [] } at off 94
branch with target == cur off; truncating
truncate_last_branch: truncated MachBranch { start: 89, end: 94, target: MachLabel(3), fixup: 2, inverted: None, labels_at_this_branch: [] }; off now 89
optimize_branches: last branch MachBranch { start: 78, end: 84, target: MachLabel(2), fixup: 1, inverted: Some([15, 132, 0, 0, 0, 0]), labels_at_this_branch: [] } at off 89
purge_latest_branches: removing branch MachBranch { start: 78, end: 84, target: MachLabel(2), fixup: 1, inverted: Some([15, 132, 0, 0, 0, 0]), labels_at_this_branch: [] }
leave optimize_branches:
b = []
l = [MachLabel(3), MachLabel(2)]
f = [MachLabelFixup { label: MachLabel(4), offset: 16, kind: JmpRel32 }, MachLabelFixup { label: MachLabel(2), offset: 80, kind: JmpRel32 }]
Recording debug range for VL8 in Reg(p2i): [i13..i14) [95..90) ; Invalid range
; DI: i12 at 89
jmp label3
block2:
; DI: i13 at 94
jmp label3
block3:
; DI: i14 at 89
movl 8(%r9,%r10,1), %ecx
@SingleAccretion that seems like a plausible explanation -- it's entirely possible that we missed a debug-info update when chomping branches. Would you be willing to make an attempt at fixing this? We record instruction offsets here for debug purposes, and then those are cross-correlated with debug_value_labels
(which contains instruction-index ranges). It's possible that we just need to do a post-pass or in-place update to ensure monotonicity in this sequence (i.e., clamp inst_offsets[i]
to be less than or equal to inst_offsets[i + 1]
)...
@cfallin thank you for a quick response! Yes, I am looking at this right now. The branching logic (if I am reading it correctly) only ever edits the instruction stream to entirely remove the last branch instruction, so it looks possible to do in-place updating.
Side note: now that I consider this, the disassembly is also incorrect because of this after-the-fact removal. That jmp label3
will not exist in the actual emitted code.
The disassembly bit is intentional: it's meant to be a dump of the VCode, which stays in N-target branch form, rather than an exact correspondence to the machine code. VCode "pseudo-instructions" are similarly slightly different. One can think of the MachBuffer branch chomping (and branch-target editing: target labels will be updated and conditional polarities will be flipped sometimes) as another layer of lowering.
This is also why @elliottt added a Capstone-based disassembly check to the filetests a while back (and why clif-util
has -D
that disassembles using Capstone): both are useful, for slightly different purposes.
Test Case
https://user-images.githubusercontent.com/5621716/161971426-a7599e7d-886f-4101-b379-8f5c20a38a8e.mov
( couldn't upload .wasm file so I'd changed extension to .mov, it is actually .wasm file)
Steps to Reproduce
RUST_BACKTRACE=1 gdb --args wasmtime run -g preinitialized.wasm
Expected Results
debug break
Actual Results
crash:
thread 'main' panicked at 'assertion failed:::emit_obj
8: core::ops::function::impls::<impl core::ops::function::FnMut for &F>::call_mut
9: <core::iter::adapters::map::Map<I,F> as core::iter::traits::iterator::Iterator>::try_fold
10: <rayon::iter::fold::FoldFolder<C,ID,F> as rayon::iter::plumbing::Folder>::consume_iter
11: rayon::iter::plumbing::bridge_producer_consumer::helper
12: <rayon::vec::IntoIter as rayon::iter::IndexedParallelIterator>::with_producer
13: <rayon::iter::while_some::WhileSome as rayon::iter::ParallelIterator>::drive_unindexed
14: rayon::iter::collect::<impl rayon::iter::ParallelExtend for alloc::vec::Vec>::par_extend
15: rayon::result::<impl rayon::iter::FromParallelIterator<core::result::Result<T,E>> for core::result::Result<C,E>>::from_par_iter
16: wasmtime::module::Module::build_artifacts
17: core::ops::function::FnOnce::call_once
18: wasmtime_cache::ModuleCacheEntry::get_data_raw
19: wasmtime::module::Module::from_binary
20: wasmtime::module::Module::from_file
21: wasmtime_cli::commands::run::RunCommand::load_module
22: wasmtime_cli::commands::run::RunCommand::load_main_module
23: wasmtime_cli::commands::run::RunCommand::execute
24: wasmtime::main
note: Some details are omitted, run with
(left < right)
left:9699
, right:7415
', crates/cranelift/src/debug/transform/expression.rs:690:13 stack backtrace: 0: rust_begin_unwind at /rustc/9d1b2106e23b1abd32fce1f17267604a5102f57a/library/std/src/panicking.rs:498:5 1: core::panicking::panic_fmt at /rustc/9d1b2106e23b1abd32fce1f17267604a5102f57a/library/core/src/panicking.rs:116:14 2: wasmtime_cranelift::debug::transform::expression::ValueLabelRangesBuilder::process_label 3: wasmtime_cranelift::debug::transform::expression::CompiledExpression::build_with_locals 4: wasmtime_cranelift::debug::transform::simulate::generate_simulated_dwarf 5: wasmtime_cranelift::debug::transform::transform_dwarf 6: wasmtime_cranelift::debug::write_debuginfo::emit_dwarf 7:RUST_BACKTRACE=full
for a verbose backtrace.Versions and Environment
Wasmtime version or commit: wasmtime 0.35.2
Operating system: ubuntu 20.04
Architecture: x86_64