Integration error

[bertinho79]

Hi!,

  Sorry but to try add this repo on HACS tell me when i try download "The version 5461f26 for this integration can not be used with HACS."

[bertinho79]

@bytestorm can you review this error? Or if you need me to provide you with any further information, let me know. Because I really find this integration very interesting.

[bytestorm]

@bertinho79 could you please tell me your HACS and HA versions? I have no issues installing/running it with the latest ones

[bertinho79]

@bytestorm

[bytestorm]

it appears I had an older version of HACS, will look into this later today

[bytestorm]

@bertinho79 should be fine now

[bertinho79]

@bytestorm thanks! it´s perfect. Now to configure. On the second line is IP on the third is password but on the first?

[bytestorm]

Looks like translations went rogue too. Fixed. You may need to clear your browser cache after updating. These fields are: ecoforest URL, username and password

[bertinho79]

@bytestorm perfect it worked! now to can the custom power flow card is copy code and paste in new file with extension .yaml? and put it on?

[bytestorm]

@bertinho79 no, you need to install https://github.com/flixlix/power-flow-card-plus using HACS Then you'll need to add power flow card to your dashboard and use my code in code editor (or manually configure it to your liking)

[bertinho79]

@bytestorm thanks again! Little by little it is taking shape. Now I can see the water temperature, but the other markers are set to zero.

[bytestorm]

@bertinho79 most likely, you have a slightly different heat pump than mine. I know there are at least 4 different versions, but I only have access to one for obvious reasons =) We could try checking yours out during some weekend. They're relatively easy to reverse engineer to implement whatever is needed.

[bertinho79]

Sería estupendo! No se si tienes telegram y seguimos en contacto por ahí. Te paso mi telegram:                          @.                   El 20 sept 2024 15:46, Sasha Boyko @.> escribió: @bertinho79 most likely, you have a slightly different heat pump than mine. I know there are at least 4 different versions, but I only have access to one for obvious reasons =) We could try checking yours out during some weekend. They're relatively easy to reverse engineer to implement whatever is needed.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

[bertinho79]

It would be great! I don't know if you have telegram and we keep in touch.I'll pass my telegram:                          @. 20 sept 2024 15:46, Sasha Boyko @.> escribió: @bertinho79 most likely, you have a slightly different heat pump than mine. I know there are at least 4 different versions, but I only have access to one for obvious reasons =) We could try checking yours out during some weekend. They're relatively easy to reverse engineer to implement whatever is needed.

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

[Jscifu]

Hello, I am really interested also in this integration, everything went fine but after installation it I can´t see some temperatures (values are -999,9 ºC). I just updated it but I still can't see temperatures. May bee I have another boileer version.

Can you help me with reverse ingineer? Regards

[bytestorm]

@Jscifu looks like you've got the same heat pump model mentioned above since only DHW and outdoor temperatures are displayed properly. I've created a separate ticket to implement support for other models.

@Jscifu, @bertinho79, could you please post details about your heat pump (like model, easynet versions info, anything you think might be useful) there?

I'm closing this issue since it was about the new HACS version support.