search

c0pperdragon / Amiga-Digital-Video

Add a digital video port to vintage Amiga machines
299 stars 30 forks source link

BOM availability #15

Closed kipper2k closed 3 years ago

kipper2k commented 3 years ago

Hi, hopefully this post is in the correct place. Do you have a BOM publically available for this as i would like to build myself a couple of these. I seen the V1 pdf but not the V2 version.

Thanks

zeakdad commented 3 years ago

Loading the project into kicad, I get the below as a BOM via the eeschema tool but I've not gone through each item yet to see if there is enough detail to actually build up a proper items to order. Hopefully this will help though

Columns are Reference / Value / Footprint / Datasheet / Qty

v C1 - C3 100nF Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder ~ 3 C1 100nF Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder ~ 1 C2 100nF Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder ~ 1 C3 100nF Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder ~ 1 C4 1uF Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder ~ 1 JButton1 Conn_01x02 Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal ~ 1 JDenise1, JDenise2 Conn_02x12_Counter_Clockwise Package_DIP:DIP-24_W15.24mm_Socket ~ 2 JMainBoard1, JMainBoard2 Conn_01x24 Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical ~ 2 JP1 Jumper_3_Bridged12 Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal ~ 1 JRaspberryPiZero1 Conn_02x20_Odd_Even Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical ~ 1 R1 3k3 Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder ~ 1 U1 74LVC86 Package_SO:TSSOP-14_4.4x5mm_P0.65mm http://www.ti.com/lit/gpn/sn74HC86 1 v U2, U3 74LVC574 Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm http://www.ti.com/lit/gpn/sn74HCT574 2 U2 74LVC574 Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm http://www.ti.com/lit/gpn/sn74HCT574 1 U3 74LVC574 Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm http://www.ti.com/lit/gpn/sn74HCT574 1 U4 TLV74333PDBVR Package_TO_SOT_SMD:SOT-23-5_HandSoldering http://ww1.microchip.com/downloads/en/DeviceDoc/MIC550X.pdf 1

kipper2k commented 3 years ago

Thanks for the info, it looks like i have enough info to build, i will leave this thread open till i can verify.

zeakdad commented 3 years ago

I took a stab a selecting parts from digikey and ordered 10 boards from jlcpcb. I guess I'll see what happens when everything arrives. The passives I just had to guess the specs, everything else was pretty straight forward

kipper2k commented 3 years ago

PCBs should be here on friday so i should hopefully be able to build. I have ordered the parts from digikey

Zucky16 commented 3 years ago

Kipper2k, if this works out for you please share your experience with us. I remember a while back you were building a bunch of cool stuff for Amiga systems, but your funding dried up and you were forced to stop. I'm in Ontario, Canada, if I remember correctly you weren't that far away. If you are successful I'd definitely buy one of these boards from you, either fully assembled or just the bare board.

c0pperdragon commented 3 years ago

Added a proper BOM to the repo