search

cBackup / main

Releases, documentation and issue tracker
http://cbackup.me
GNU Affero General Public License v3.0
30 stars 17 forks source link

Failed for backup Avaya switch #28

Open ukyoli opened 5 years ago

ukyoli commented 5 years ago

I am successful to backup all HP and Cisco switch, but failed for Avaya, please see the log as below,

"Task backup, node 280: timeout. Telnet response expect failed. Check device auth sequence and credentials."

I also attached how I login the Avaya switch by SecureCRT and the authentication template by screen shot in detial

ukyoli commented 5 years ago 
     ###   ###            ###   ###   ###            ###   ###
    #####   ###          ###   #####   ###          ###   #####
   ### ###   ###        ###   ### ###   ###        ###   ### ###
  ###   ###   ###      ###   ###   ###   ###      ###   ###   ###
 ###     ###   ###    ###   ###     ###   ###    ###   ###     ###
###       ###   ###  ###   ###       ###   ###  ###   ###       ###

########## ### ###### ########## ### ###### ########## ### ############ ### #### ############ ### #### ############ ###

                                            ###
                                           ###

Enter Ctrl-Y to begin.

Ethernet Routing Switch 4850GTS Avaya Copyright (c) 1996-2013, All Rights Reserved

HW:11 FW:5.6.0.18 SW:v5.6.3.024

ukyoli commented 5 years ago 
                     Username: [ RW ]
                     Password: [ *************** ]

                     Enter Password: ******

Enter text, press or when complete.

ukyoli commented 5 years ago

CG-SR_R5#

ukyoli commented 5 years ago

Was anybody face the same situation ? Thanks in advance.

ukyoli commented 5 years ago

Please see my "auth template" as below,

Enter Ctrl-Y to begin. %%SEQ(CTRLY)%% ame: {{telnet_login}} ord: {{telnet_password}} #

Please correct me if something wrong :) Thanks.

pierre2jean commented 4 years ago

Hello ukyoli

Thanks for that authentication template ! It works fine for me, but i'm unable to get a backup file from the switch...

When i view the configuration i get a blank config :

CONFIG

ENDOF_CONFIG

What working template do you use? Mine is just this:

terminal length 0 show running-config logout

mbensaid23 commented 4 years ago

@ukyoli Hello,

I installed cbackup for saving the configuration of my HP switches except that I cannot recover the total configuration, Can you help me please.

i have just this :

CONFIG

[24;1Hshow config Startup configuration: 41

; J9855A Configuration Editor; Created on release #

ENDOF_CONFIG

ichha commented 4 years ago

I have Huawei NE40 Router I cannot Save the Configuration. I got this Error - Task backup, node 1: timeout. Telnet response expect failed. Check device auth sequence and credentials.

Pls Anyone Can Help......

ichha commented 4 years ago

ame: {{telnet_login}} ord: {{telnet_password}} NMA>