cabbagecreek
commented
3 years ago Hello Ian!
It looks like the Marlin is configured to report Temp. M3dPt has connection with the board. If you press “Show communication” you will se the communication live. Look at this page ( https://marlinfw.org/docs/gcode/M155.html ) This is the command that creates the temp readings. In the “show communication” its possible to send the “M155 S0” that stops the temperature report.
Then there is an issue with Marlin 2.x that status report is not done like Marlin 1.x. Try a M501 = Read EEPROM (or the button )
That should “kick-start” the reading of initial parameters from startup of Marlin.
The reason for this wired behavior is that Temperature logging “blocks” the native GCODE commands that Marlin3DprinterTool is based on.
Try this and send me a mail of the result
Regards Johnny Lindén
Från: Ian K Nicholas @.> Skickat: den 27 september 2021 12:14 Till: cabbagecreek/Marlin3DprinterTool @.> Kopia: Subscribed @.***> Ämne: [cabbagecreek/Marlin3DprinterTool] not responding (#179)
Can not get any response from your Programme (Marlin3DprinterTool). I am using Windows 10 connected to a Bigtreetech GTR V1.0 board with Marlin 2.0.9.1 installed. When I select the correct board rate and Port I can do nothing else, if I click any tab I get a Program not responding error, I know its the right port and that connection is possible as I can connect and use Pronterface software no problem, I do not try and use the same programmes or ports at the same time. If I click reset on my TFT screen attached to my GTR board, I get an almost on and off connection as Marlin3DprinterTool shows my Marlin parameters but then no actions can be made, no movements, no PID tune, the programme allows me to select different tabs at this stage of quick on off, but nothing else https://user-images.githubusercontent.com/16881000/134889713-fa58ad8d-294d-46d5-a101-db2b0d2d418f.jpg https://user-images.githubusercontent.com/16881000/134889718-c9e45bc9-a634-4748-90cb-61ac27997bba.jpg https://user-images.githubusercontent.com/16881000/134889721-9a2a99d8-0cbb-495b-837e-feff994b3e53.jpg
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/cabbagecreek/Marlin3DprinterTool/issues/179 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AAFOEYN6HFOEECETI4IX4ELUEA7W3ANCNFSM5E2FZPBQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub . https://github.com/notifications/beacon/AAFOEYN4ET42AFV4S26UDNDUEA7W3A5CNFSM5E2FZPB2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4PAUI2QA.gif
-- Detta e-postmeddelande har sökts igenom efter virus med antivirusprogram från Avast. https://www.avast.com/antivirus
ikn369330
Can not get any response from your Programme (Marlin3DprinterTool). I am using Windows 10 connected to a Bigtreetech GTR V1.0 board with Marlin 2.0.9.1 installed. When I select the correct board rate and Port I can do nothing else, if I click any tab I get a Program not responding error, I know its the right port and that connection is possible as I can connect and use Pronterface software no problem, I do not try and use the same programmes or ports at the same time. If I click reset on my TFT screen attached to my GTR board, I get an almost on and off connection as Marlin3DprinterTool shows my Marlin parameters but then no actions can be made, no movements, no PID tune, the programme allows me to select different tabs at this stage of quick on off, but nothing else
