I have configured some automations for some events on the sensors, if I get alarm states set by the developer tools, the automation works as it is supposed to and the state changes in the alarm control panel, if I set them from the alarm control panel the alarm activates by making a sound (which is not what I configured) and the alarm operates with the default settings of the Xiaomi gateway before the integration which not what I want. Is there a guide, some tips or something to configure the panel to set the correct settings in my gateway?
Below is the automation settings of one of the sensors:
id: 1000001-00000000004
alias: Back Door
trigger:
entity_id: binary_sensor.lumi_158d0002c472e7_door
from: 'on'
platform: state
to: 'off'
condition:
condition: state
entity_id: alarm_control_panel.miio_gateway
state: armed_away
condition: or
conditions:
condition: state
entity_id: alarm_control_panel.miio_gateway
state: armed_home
condition: or
conditions:
condition: state
entity_id: alarm_control_panel.miio_gateway
state: armed_night
action:
data:
message: Back Door Open
service: telegram_bot.send_message
and this is the configuration.yaml section for the gateway:
miio_gateway:
host: 10.10.10.99 # IP of your gateway
port: 54321 # port running miio_client, defaults to 54321
sensors: # sensors that will be available in HA (optional)
sid: lumi.158d00027cce6a
class: motion # motion sensor
friendly_name: Back Room # display name (optional)
And this is the panel configuration in which the only states that work are the ones in the code below, if I change manually the states to eg. armed_away instead or arm_away I get the error of unknown state.
entity: alarm_control_panel.miio_gateway
states:
arm_home
arm_away
arm_night
type: alarm-panel
I'm a complete newbiew and trying very much to learn the logic behind this but I fail to understand why the state is valid for the same entity when set from the developer tools and invalid when configured in this widget.....
Hi,
I have configured some automations for some events on the sensors, if I get alarm states set by the developer tools, the automation works as it is supposed to and the state changes in the alarm control panel, if I set them from the alarm control panel the alarm activates by making a sound (which is not what I configured) and the alarm operates with the default settings of the Xiaomi gateway before the integration which not what I want. Is there a guide, some tips or something to configure the panel to set the correct settings in my gateway? Below is the automation settings of one of the sensors:
and this is the configuration.yaml section for the gateway:
And this is the panel configuration in which the only states that work are the ones in the code below, if I change manually the states to eg. armed_away instead or arm_away I get the error of unknown state.
I'm a complete newbiew and trying very much to learn the logic behind this but I fail to understand why the state is valid for the same entity when set from the developer tools and invalid when configured in this widget.....
Thank you!