incline doesn't work

[jonathanbolduc1]

debug-lundéc5_11_37_06_2022.log

treadmill horizon 7.0at kinomap

[cagnulein]

@jonathanbolduc1 in this log are you sure you were well connected to kinomap? did you see the speed on kinomap?

[jonathanbolduc1]

yes i see the speed on kinomap and i can adjust speed with qz or treadmill

[cagnulein]

@jonathanbolduc1 Could you please turn off the iOS peloton workaround in the experimental settings, restart qz and redo the test? Thanks

[jonathanbolduc1]

with peloton workaround turned off, kinomap doesn't start

[jonathanbolduc1]

I made few test and I can only rise the incline with Qz, the incline - doesn't work. when I put it back to 0 incline on the treadmill, the qz app show 0 incline.

[cagnulein]

I made few test and I can only rise the incline with Qz, the incline - doesn't work. when I put it back to 0 incline on the treadmill, the qz app show 0 incline.

could you create me a debug log for this?

with peloton workaround turned off, kinomap doesn't start

I will try this next week when I will be at home again

[jonathanbolduc1]

debug-mardéc6_18_20_12_2022.log

[jonathanbolduc1]

Also on the kinomap web site they say that the serial number of my treadmill sould start with 2207…but my serial number start with TM1021. I upgrade the firmware to version V4.002

[cagnulein]

the inclination minus should be already fixed in the beta @jonathanbolduc1 send me an email to roberto.viola83 at gmail.com indicating this ticket and if you are on android or iOS. Thanks

about the kinomap request it doesn't matter since that firmware request it's only when you use the treadmill directly to their app. Since you're using the QZ bridge, Kinomap is not aware of your firmware.

I will check the kinomap implementation tomorrow or friday.

[cagnulein]

@jonathanbolduc1 fixed! I'm gonna send you another version with the kinomap fix!

[jonathanbolduc1]

Hi, thank you very much, incline work now. still have few bugs but I can live with that. first one, when incline on kinomap is at 15%, qz and treadmill show 13.5 or 14.5. Next one, at the end of the video, the treadmill usually stop but it don't. I try pausing and stopping qz but it treadmill still running. I push stop on the treadmill to stop it. I attached the log if you want to take a look. Regards debug-jeudéc8_17_19_09_2022.log

[cagnulein]

still have few bugs but I can live with that. first one, when incline on kinomap is at 15%, qz and treadmill show 13.5 or 14.5.

it's because kinomap is sending requestInclination= 14.8 so qz is rounding. you can increase slightly the difficult of kinomap to force an upper rouding (for example 110%)

I push stop on the treadmill to stop it. I attached the log if you want to take a look. Regards

found the issue. I will send you another one with the fix

[cagnulein]

@jonathanbolduc1 version sent!

[jonathanbolduc1]

Another bug today but the debug log was turned off. The incline was 0 on the treadmill and on qz but the elevation gain was rising. I can record debug log later this week if you want. Regards,

[cagnulein]

@jonathanbolduc1 Ok let me know

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[cagnulein]

@jonathanbolduc1 any news?

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.