Closed vineman70-3 closed 8 months ago
Thanks I will check it as soon as possible
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno ven 26 gen 2024 alle 18:08 vineman70-3 @.***> ha scritto:
Assigned #2054 https://github.com/cagnulein/qdomyos-zwift/issues/2054 to @cagnulein https://github.com/cagnulein.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#event-11611133650, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWEJLVJ57FZSTAICXQDYQPPKLAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJRGYYTCMJTGM3DKMA . You are receiving this because you were assigned.Message ID: @.***>
log checked, i saw that you have a lot of fitness devices around you. So for sure when you want to use the bike you need to set it to the manual device setting in the advanced setting. You can create a profile for it to switch it quickly.
For the treadmill: which treadmill do you have? A life fitness one?
Yes, there are 3 Lifefitness treadmills (plus ellipticals, stairmasters, etc)
On Jan 27, 2024, at 1:32 AM, Roberto Viola @.***> wrote:
log checked, i saw that you have a lot of fitness devices around you. So for sure when you want to use the bike you need to set it to the manual device setting in the advanced setting. You can create a profile for it to switch it quickly.
For the treadmill: which treadmill do you have? A life fitness one?
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913032400, or unsubscribe https://github.com/notifications/unsubscribe-auth/BFUEXYOSDUEIIVI5S6ATSWLYQSNPPAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGAZTENBQGA. You are receiving this because you authored the thread.
ok so let's start from the bike. set it as a manual device and everything should works. let me know if it's not
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno sab 27 gen 2024 alle 12:22 vineman70-3 @.***> ha scritto:
Yes, there are 3 Lifefitness treadmills (plus ellipticals, stairmasters, etc)
On Jan 27, 2024, at 1:32 AM, Roberto Viola @.***> wrote:
log checked, i saw that you have a lot of fitness devices around you. So for sure when you want to use the bike you need to set it to the manual device setting in the advanced setting. You can create a profile for it to switch it quickly.
For the treadmill: which treadmill do you have? A life fitness one?
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913032400>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/BFUEXYOSDUEIIVI5S6ATSWLYQSNPPAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGAZTENBQGA>.
You are receiving this because you authored the thread.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913122980, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWHRLC2764OF23NONSDYQTPP7AVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGEZDEOJYGA . You are receiving this because you were mentioned.Message ID: @.***>
That is exactly what I have been doing and it has not worked, Even though I set the bike in manual under advanced options it does not appear and remain at the top of the app under start/stop the way it did in 2.15.4. I have also set it up that way in a “bike” profile. However, I will try it all again today and see how it goes. Thank you.
On Jan 27, 2024, at 6:24 AM, Roberto Viola @.***> wrote:
ok so let's start from the bike. set it as a manual device and everything should works. let me know if it's not
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno sab 27 gen 2024 alle 12:22 vineman70-3 @.***> ha scritto:
Yes, there are 3 Lifefitness treadmills (plus ellipticals, stairmasters, etc)
On Jan 27, 2024, at 1:32 AM, Roberto Viola @.***> wrote:
log checked, i saw that you have a lot of fitness devices around you. So for sure when you want to use the bike you need to set it to the manual device setting in the advanced setting. You can create a profile for it to switch it quickly.
For the treadmill: which treadmill do you have? A life fitness one?
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913032400>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/BFUEXYOSDUEIIVI5S6ATSWLYQSNPPAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGAZTENBQGA>.
You are receiving this because you authored the thread.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913122980, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWHRLC2764OF23NONSDYQTPP7AVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGEZDEOJYGA . You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913123472, or unsubscribe https://github.com/notifications/unsubscribe-auth/BFUEXYMOYPB6PM6BU4NG663YQTPVXAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGEZDGNBXGI. You are receiving this because you authored the thread.
send me a log in this context because the log you sent me it's about a treadmill connection, not the bike. Let me know!
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno sab 27 gen 2024 alle ore 13:36 vineman70-3 < @.***> ha scritto:
That is exactly what I have been doing and it has not worked, Even though I set the bike in manual under advanced options it does not appear and remain at the top of the app under start/stop the way it did in 2.15.4. I have also set it up that way in a “bike” profile. However, I will try it all again today and see how it goes. Thank you.
On Jan 27, 2024, at 6:24 AM, Roberto Viola @.***> wrote:
ok so let's start from the bike. set it as a manual device and everything should works. let me know if it's not
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno sab 27 gen 2024 alle 12:22 vineman70-3 @.***> ha scritto:
Yes, there are 3 Lifefitness treadmills (plus ellipticals, stairmasters, etc)
On Jan 27, 2024, at 1:32 AM, Roberto Viola @.***> wrote:
log checked, i saw that you have a lot of fitness devices around you. So for sure when you want to use the bike you need to set it to the manual device setting in the advanced setting. You can create a profile for it to switch it quickly.
For the treadmill: which treadmill do you have? A life fitness one?
— Reply to this email directly, view it on GitHub <
https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913032400>,
or unsubscribe <
You are receiving this because you authored the thread.
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913122980>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWHRLC2764OF23NONSDYQTPP7AVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGEZDEOJYGA>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913123472>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/BFUEXYMOYPB6PM6BU4NG663YQTPVXAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGEZDGNBXGI>.
You are receiving this because you authored the thread.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913144350, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWAG2N3GWRWWRKK6DPDYQTYFTAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGE2DIMZVGA . You are receiving this because you were mentioned.Message ID: @.***>
Using the Echelon EX7S bike and QZ 2.15.4 with no problem. Using QZ 2.16.38 cannot get it to work with start and need to use the + is speed to get watts to register. That eventually gets Zwift going but the QZ app crashes within a minute & therefore shuts done Zwift. I am attaching a zip file of everything that went into files but there is no debug file. The crash happens every time. The echelon is in manually but many times a TV or “run” still shows at the top. This is probably not worth your time to look at anymore. I will go back to using version 2.15.4. Thank you again. Howard

On Jan 27, 2024, at 8:27 AM, Roberto Viola @.***> wrote:
send me a log in this context because the log you sent me it's about a treadmill connection, not the bike. Let me know!
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno sab 27 gen 2024 alle ore 13:36 vineman70-3 < @.***> ha scritto:
That is exactly what I have been doing and it has not worked, Even though I set the bike in manual under advanced options it does not appear and remain at the top of the app under start/stop the way it did in 2.15.4. I have also set it up that way in a “bike” profile. However, I will try it all again today and see how it goes. Thank you.
On Jan 27, 2024, at 6:24 AM, Roberto Viola @.***> wrote:
ok so let's start from the bike. set it as a manual device and everything should works. let me know if it's not
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno sab 27 gen 2024 alle 12:22 vineman70-3 @.***> ha scritto:
Yes, there are 3 Lifefitness treadmills (plus ellipticals, stairmasters, etc)
On Jan 27, 2024, at 1:32 AM, Roberto Viola @.***> wrote:
log checked, i saw that you have a lot of fitness devices around you. So for sure when you want to use the bike you need to set it to the manual device setting in the advanced setting. You can create a profile for it to switch it quickly.
For the treadmill: which treadmill do you have? A life fitness one?
— Reply to this email directly, view it on GitHub <
https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913032400>,
or unsubscribe <
You are receiving this because you authored the thread.
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913122980>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWHRLC2764OF23NONSDYQTPP7AVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGEZDEOJYGA>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913123472>, or unsubscribe < https://github.com/notifications/unsubscribe-auth/BFUEXYMOYPB6PM6BU4NG663YQTPVXAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGEZDGNBXGI>.
You are receiving this because you authored the thread.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913144350, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWAG2N3GWRWWRKK6DPDYQTYFTAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGE2DIMZVGA . You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2054#issuecomment-1913156266, or unsubscribe https://github.com/notifications/unsubscribe-auth/BFUEXYMDF6RVTCEYHN5EVF3YQT6CPAVCNFSM6AAAAABCMONYR2VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMJTGE2TMMRWGY. You are receiving this because you authored the thread.
@vineman70-3 i can't see the attachment, you have to upload it from the github web interface. The problem is that I will update the 2.15.4 on the store soon with the 2.16.30 so I have to fix this for you otherwise you can't use the app anymore.
Describe the bug A clear and concise description of what the bug is.
To Reproduce Steps to reproduce the behavior:
Expected behavior A clear and concise description of what you expected to happen.
I am running 2.16.38. I got a new iPad Pro to run the app thinking it might have better connectivity. Unfortunately, I have not been able to get either the bike or treadmill to work at all, let alone get auto-incline adjustments on Zwift on the treadmill. I set up 2 profiles one for the bike and one for the treadmill.
For example, sitting on the bike again it finds everything except the bike but eventually I manage to find the bike and put it in manually in the advanced setting; Manual Device: ECHEX-7S-100974. But it does not show up at the top of the tiles under Pause & Stop – something always else does as in the attached screen shot. The Pause & Stop remain “greyed out”. I can push the “+” button in speed or inclination & then watts comes up, but there is never a cadence reading.
By turning the app, Zwift, BLE on and off somehow, I get the Zwift avatar to move if I can get a watt reading, BUT within less than a minute the app crashes and everything stops. Nothing I could figure to do stops the crash no matter how many times I tried. So, I am completely stuck.
Of less importance even though I indexed a set of tiles for the bike profile (0, watt; 1, cadence; 2, heart; 3, inclination; 4, elevation; 5, odometer; 6, pace; 7, FTP%; 8, elapsed; 9, time; and 10, speed) the tiles that appear, as in the attachment, never match what I put in the tiles options.
So, unless what I did makes any sense and you can suggest something, I cannot think what to do except to delete the beta version and go back to the 2.15 version and at least be able to do the bike and run on Zwift without auto-inclination etc.
Screenshots If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Version [e.g. 22] iPad ro (11-inch) 4th generation Append a debug log debug-Thu_Jan_25_10_24_14_2024.log
Follow this guide https://github.com/cagnulein/qdomyos-zwift/wiki/How-do-i-get-the-debug-log-in-case-something-doesn't-work%3F
Additional context Add any other context about the problem here.