[BUG] Merach S09

[markgoodrich]

debug-Fri_Feb_2_11_55_18_2024.log

[cagnulein]

Record a video of what you are doing please Including watch and phone

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:31 markgoodrich @.***> ha scritto:

I did many times

On Tue, Feb 13, 2024, 10:22 AM Roberto Viola @.***> wrote:

Use the refresh button to populate the combo box while you are in the settings

You have to see forerunner there

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:21 markgoodrich @.***> ha scritto:

I understand exactly what you are saying. When I have the watch broadcasting HR and choose virtual run the watch DOES connect to QZ but in settings > Heart Rate Options > Heart Belt Name, all I see is "Disabled" drop down list only shows "wifi".

I connected everything as listed earlier, still no HR in QZ, when Zwift opened power, cadence, etc, connect to Wahoo (QZ) when try to connect HR to Zwift eventually Forerunner is found but "no signal". QZ did not show hr after connection nor after connecting to zwift.

On Tue, Feb 13, 2024 at 10:08 AM Roberto Viola @.***> wrote:

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941897068>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJKTRXFGBEFBT5WFVVTYTOFYHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4TOMBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941937065>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWDRW4G23OF2C44XHBDYTOHHNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTOMBWGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941939873>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJL34VZDPERB2NSPGWLYTOHNBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTSOBXGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941955599, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWAHKAU5KNXWQSHHRW3YTOIMNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHE2TKNJZHE . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

I feel like the village idiot.

Where and how do I get a video to you? Google Drive?

On Tue, Feb 13, 2024 at 10:33 AM Roberto Viola @.***> wrote:

Record a video of what you are doing please Including watch and phone

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:31 markgoodrich @.***> ha scritto:

I did many times

On Tue, Feb 13, 2024, 10:22 AM Roberto Viola @.***> wrote:

Use the refresh button to populate the combo box while you are in the settings

You have to see forerunner there

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:21 markgoodrich @.***> ha scritto:

I understand exactly what you are saying. When I have the watch broadcasting HR and choose virtual run the watch DOES connect to QZ but in settings > Heart Rate Options > Heart Belt Name, all I see is "Disabled" drop down list only shows "wifi".

I connected everything as listed earlier, still no HR in QZ, when Zwift opened power, cadence, etc, connect to Wahoo (QZ) when try to connect HR to Zwift eventually Forerunner is found but "no signal". QZ did not show hr after connection nor after connecting to zwift.

On Tue, Feb 13, 2024 at 10:08 AM Roberto Viola @.***> wrote:

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941897068>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJKTRXFGBEFBT5WFVVTYTOFYHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4TOMBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941937065>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWDRW4G23OF2C44XHBDYTOHHNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTOMBWGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941939873>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJL34VZDPERB2NSPGWLYTOHNBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTSOBXGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941955599>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWAHKAU5KNXWQSHHRW3YTOIMNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHE2TKNJZHE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941961148, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJPHD6IIGWHM7L4OCYTYTOIVPAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHE3DCMJUHA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Yes and share the link here then

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:54 markgoodrich @.***> ha scritto:

I feel like the village idiot.

Where and how do I get a video to you? Google Drive?

On Tue, Feb 13, 2024 at 10:33 AM Roberto Viola @.***> wrote:

Record a video of what you are doing please Including watch and phone

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:31 markgoodrich @.***> ha scritto:

I did many times

On Tue, Feb 13, 2024, 10:22 AM Roberto Viola @.***> wrote:

Use the refresh button to populate the combo box while you are in the settings

You have to see forerunner there

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:21 markgoodrich @.***> ha scritto:

I understand exactly what you are saying. When I have the watch broadcasting HR and choose virtual run the watch DOES connect to QZ but in settings > Heart Rate Options > Heart Belt Name, all I see is "Disabled" drop down list only shows "wifi".

I connected everything as listed earlier, still no HR in QZ, when Zwift opened power, cadence, etc, connect to Wahoo (QZ) when try to connect HR to Zwift eventually Forerunner is found but "no signal". QZ did not show hr after connection nor after connecting to zwift.

On Tue, Feb 13, 2024 at 10:08 AM Roberto Viola @.***> wrote:

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941897068>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJKTRXFGBEFBT5WFVVTYTOFYHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4TOMBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941937065>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWDRW4G23OF2C44XHBDYTOHHNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTOMBWGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941939873>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJL34VZDPERB2NSPGWLYTOHNBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTSOBXGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941955599>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWAHKAU5KNXWQSHHRW3YTOIMNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHE2TKNJZHE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941961148>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJPHD6IIGWHM7L4OCYTYTOIVPAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHE3DCMJUHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1942001001, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWHQGF5RGX3U62XZKFTYTOLEXAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBSGAYDCMBQGE . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

It'll be later, don't stay up .....:)

On Tue, Feb 13, 2024 at 11:02 AM Roberto Viola @.***> wrote:

Yes and share the link here then

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:54 markgoodrich @.***> ha scritto:

I feel like the village idiot.

Where and how do I get a video to you? Google Drive?

On Tue, Feb 13, 2024 at 10:33 AM Roberto Viola @.***> wrote:

Record a video of what you are doing please Including watch and phone

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:31 markgoodrich @.***> ha scritto:

I did many times

On Tue, Feb 13, 2024, 10:22 AM Roberto Viola @.***> wrote:

Use the refresh button to populate the combo box while you are in the settings

You have to see forerunner there

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:21 markgoodrich @.***> ha scritto:

I understand exactly what you are saying. When I have the watch broadcasting HR and choose virtual run the watch DOES connect to QZ but in settings > Heart Rate Options > Heart Belt Name, all I see is "Disabled" drop down list only shows "wifi".

I connected everything as listed earlier, still no HR in QZ, when Zwift opened power, cadence, etc, connect to Wahoo (QZ) when try to connect HR to Zwift eventually Forerunner is found but "no signal". QZ did not show hr after connection nor after connecting to zwift.

On Tue, Feb 13, 2024 at 10:08 AM Roberto Viola @.***> wrote:

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941897068>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJKTRXFGBEFBT5WFVVTYTOFYHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4TOMBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941937065>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWDRW4G23OF2C44XHBDYTOHHNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTOMBWGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941939873>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJL34VZDPERB2NSPGWLYTOHNBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTSOBXGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941955599>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWAHKAU5KNXWQSHHRW3YTOIMNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHE2TKNJZHE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941961148>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJPHD6IIGWHM7L4OCYTYTOIVPAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHE3DCMJUHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1942001001>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWHQGF5RGX3U62XZKFTYTOLEXAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBSGAYDCMBQGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1942015340, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJMLRYBLXNRFTQTDKZTYTOMCFAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBSGAYTKMZUGA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

any news @markgoodrich ?

[markgoodrich]

Hi, quite a bit of progress...have not been able to do the video you asked for, I need a third device to shoot it.

BUT, I've successfully completed a short 10 minute ride with all functions showing on QZ dashboard and on Zwift screen. Auto resistance is changing as desired, and even gear changing is working. Forerunner is also connecting.

The remaining issue, assuming things are now all working, is my speed and power are much to high. I'm barely pedaling at 50-60 rpm and passing everyone. If I increase to a little higher, my speed jumps up, too. I need to offset the speed being recorded to be more realistic. Power output is the same issue, but from what i"ve read, there may be no way to adjust that...I definitely am not generating the wattage shown.

I hope I attached a debug log of the ten minute ride in case that will help get the speed issue adjusted.

I have NO IDEA why or how it's all working!!!

On Thu, Feb 15, 2024 at 5:14 AM Roberto Viola @.***> wrote:

any news @markgoodrich https://github.com/markgoodrich ?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1945879477, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJNCHT3QIVTAVIBSFBDYTXUZ3AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBVHA3TSNBXG4 . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

to decrease power set the watt gain to 0.5 for example or even less

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 15 feb 2024 alle 18:47 markgoodrich @.***> ha scritto:

Hi, quite a bit of progress...have not been able to do the video you asked for, I need a third device to shoot it.

BUT, I've successfully completed a short 10 minute ride with all functions showing on QZ dashboard and on Zwift screen. Auto resistance is changing as desired, and even gear changing is working. Forerunner is also connecting.

The remaining issue, assuming things are now all working, is my speed and power are much to high. I'm barely pedaling at 50-60 rpm and passing everyone. If I increase to a little higher, my speed jumps up, too. I need to offset the speed being recorded to be more realistic. Power output is the same issue, but from what i"ve read, there may be no way to adjust that...I definitely am not generating the wattage shown.

I hope I attached a debug log of the ten minute ride in case that will help get the speed issue adjusted.

I have NO IDEA why or how it's all working!!!

On Thu, Feb 15, 2024 at 5:14 AM Roberto Viola @.***> wrote:

any news @markgoodrich https://github.com/markgoodrich ?

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1945879477>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJNCHT3QIVTAVIBSFBDYTXUZ3AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBVHA3TSNBXG4>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1946745291, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWEA3QFJX7UXQGP24UTYTZCZ5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBWG42DKMRZGE . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Okay, thanks, and will the power offset change my speed?

And of course I apparently didn't attach the debug log. It's here, in case you need it.

debug-Thu_Feb_15_11_30_20_2024.log

[cagnulein]

Yes watt gain will affect also the speed on zwift

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 15 feb 2024 alle 19:29 markgoodrich @.***> ha scritto:

Okay, thanks, and will the power offset change my speed?

And of course I apparently didn't attach the debug log. It's here, in case you need it.

debug-Thu_Feb_15_11_30_20_2024.log https://github.com/cagnulein/qdomyos-zwift/files/14300857/debug-Thu_Feb_15_11_30_20_2024.log

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1946882226, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWEY2M6GXHG5ARMR23DYTZHZRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBWHA4DEMRSGY . You are receiving this because you were mentioned.Message ID: @.***>

[jli3388]

hi Roberto, sorry to butt in, I have the exact same bike, using Mywhoosh atm. Similar problem initially with @markgoodrich , everything connects, and Mywhoosh shows speed and power etc. But I am not getting any resistance change on training.

Should I file another bug or we can use this bug to keep going. Here is the log captured during my two short training attempt session, I did attempt to fast forward the training hoping to see resistance change but nothing happened. debug-Wed_Feb_21_20_42_13_2024.log.zip

Again, please let me know if I should file a new bug instead. Tks.

[cagnulein]

Ok, I'll take a look. It's fine to use this one, thanks

Il giorno gio 22 feb 2024 alle 04:58 jli3388 @.***> ha scritto:

hi Roberto, sorry to butt in, I have the exact same bike, using Mywhoosh atm. Similar problem initially with @markgoodrich https://github.com/markgoodrich , everything connects, and Mywhoosh shows speed and power etc. But I am not getting any resistance change on training.

Should I file another bug or we can use this bug to keep going. Here is the log captured during my two short training attempt session, I did attempt to fast forward the training hoping to see resistance change but nothing happened. debug-Wed_Feb_21_20_42_13_2024.log.zip https://github.com/cagnulein/qdomyos-zwift/files/14368481/debug-Wed_Feb_21_20_42_13_2024.log.zip

Again, please let me know if I should file a new bug instead. Tks.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1958612356, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWHFF2B4RG3QDHKOMWDYU267BAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJYGYYTEMZVGY . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Hi! the main issue is that you have to enable the zwift workout mode in the bike setting in QZ as well Let me know!

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 22 feb 2024 alle ore 05:44 cagnulein @.***> ha scritto:

Ok, I'll take a look. It's fine to use this one, thanks

Il giorno gio 22 feb 2024 alle 04:58 jli3388 @.***> ha scritto:

hi Roberto, sorry to butt in, I have the exact same bike, using Mywhoosh atm. Similar problem initially with @markgoodrich https://github.com/markgoodrich , everything connects, and Mywhoosh shows speed and power etc. But I am not getting any resistance change on training.

Should I file another bug or we can use this bug to keep going. Here is the log captured during my two short training attempt session, I did attempt to fast forward the training hoping to see resistance change but nothing happened. debug-Wed_Feb_21_20_42_13_2024.log.zip https://github.com/cagnulein/qdomyos-zwift/files/14368481/debug-Wed_Feb_21_20_42_13_2024.log.zip

Again, please let me know if I should file a new bug instead. Tks.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1958612356, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWHFF2B4RG3QDHKOMWDYU267BAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJYGYYTEMZVGY . You are receiving this because you were mentioned.Message ID: @.***>

[jli3388]

@cagnulein , I did tried another session before with that setting on but nothing changed if I remember correctly. Perhaps I have done something wrong. I will try that again later tonight and update you. Tks

[jli3388]

@cagnulein I just tried ur suggestions. It WORKS!!!
however I do noticed something might be off:

1. the power output is probably inflated. Not sure how to tune it.
2. the resistance change in a training is not smooth. every time it needs to go to another level, it flip back and forth from the original level to the target level, then back to the original level and then finally to the target level. Not sure if this is intentional to make the transition smoother.....
3. On higher resistance level, it pretty much flip back and forth at every right leg down stroke. It would for example set the resistance to 24, then I have to stand and power down on it, which cause it the quickly change to 13 or 15, then it will change to 24 again right before my right leg push down. Not sure if this is normal. I will try to do google it to see how others tune the app.

All in all, it works, very happy about the bike and the app. Thank you very much for the wonderful app.

[cagnulein]

for the wattage inflated use a lower watt gain setting, in the advanced settings: for example a 0.8w

for the problem that it's changing resistance too quickly use a higher number to the zwift erg filter up and down. set a 20 and 20 to start

a debug log will also be useful

let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 23 feb 2024 alle 03:23 jli3388 @.***> ha scritto:

@cagnulein https://github.com/cagnulein I just tried ur suggestions. It WORKS!!! however I do noticed something might be off:

1. the power output is probably inflated. Not sure how to tune it.
2. the resistance change in a training is not smooth. every time it needs to go to another level, it flip back and forth from the original level to the target level, then back to the original level and then finally to the target level. Not sure if this is intentional to make the transition smoother.....
3. On higher resistance level, it pretty much flip back and forth at every right leg down stroke. It would for example set the resistance to 24, then I have to stand and power down on it, which cause it the quickly change to 13 or 15, then it will change to 24 again right before my right leg push down. Not sure if this is normal. I will try to do google it to see how others tune the app.

All in all, it works, very happy about the bike and the app. Thank you very much for the wonderful app.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1960648331, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCVZCBJL57KUT3O3P3YU74SDAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNRQGY2DQMZTGE . You are receiving this because you were mentioned.Message ID: @.***>

[jli3388]

hi Roberto,

I did some more testing with the adjustment u suggested, however I believe the calculation is off somewhere. When the training starts it feels fine. But when I fast forward to the higher intensity section things started to get strange. The bike only has 16 level of resistances, however sometime I will see it try to set it to 24, which cause the bike to ram the resistance to as high as it can then quickly reset to what it was before. I tried setting the Max Resistance level to 16 but then it will crank the resistance level to the highest at the beginning of the training when its simply a warmup.

Also during periods where it does seems to work, the ERG calculation still feels off. E.g. when the section only requires 90-130 watt and at the time when my output is almost double that at 230watt, it would still crank up the resistance to almost max. It would only went down if I speed up my paddling even more. And sometimes if I speed up too much, it feels like it would throw off the calculation completely and cause the ERG to go wild and set the resistance to 24 for no reason at all.

The log attached should cover the scenario I mentioned. I am not sure how to further divide it though to make it easier for u to look at. Please let me know if u want me to reproduce a particular scenario and have it captured in log.

debug-Sat_Feb_24_00_31_43_2024.log.zip

[cagnulein]

@jli3388 i guess i got your issue: you need the beta for this. send me an email to roberto.viola83 at gmail.com indicating this ticket and if you are on android or iOS. Thanks

[jli3388]

@cagnulein I finally tried the beta, its a lot smoother and not as erratic anymore. However another problem come up, the resistance has become very mild. I tried to bump up the min resistance, set the watt offset to 0.8 and lower, set the max resistance to 16 to match what actually is available with the bike. I doesn't move pass level 6 during a workout. I will try to do some more config tuning and if can't resolve it, will get another session with debug enabled.

In the meantime, please know if u have any additional suggestions on things that I might have missed. Tks

[cagnulein]

@jli3388 share a debug log of your current issue

[markgoodrich]

jlli3388, my two cents, worth much less, might help. I think the 24-level resistance is related to Zwift recognizing the bike as a Kickr, rather than a Merach. I don't change max resistance. I have my initial resistance set at 9, which feels like a flat road to me. QZ definitely recognizes my bike as a Merach.

I have watt OFFSET at 0, and am playing around with watt GAIN to try to calibrate Zwift speed with real road speed. I'm currently set at 0.4 and will try that today if I have time. 0.5 watt gain had me riding about 3-5mph faster than I expected based on perceived effort.

Be aware I am an idiot regarding all this, and Roberto will confirm...:)

On Wed, Feb 28, 2024 at 8:58 PM jli3388 @.***> wrote:

@cagnulein https://github.com/cagnulein I finally tried the beta, its a lot smoother and not as erratic anymore. However another problem come up, the resistance has become very mild. I tried to bump up the min resistance, set the watt offset to 0.8 and lower, set the max resistance to 16 to match what actually is available with the bike. I doesn't move pass level 6 during a workout. I will try to do some more config tuning and if can't resolve it, will get another session with debug enabled.

In the meantime, please know if u have any additional suggestions on things that I might have missed. Tks

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1970308284, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJP2DBGONZIUXEGEQDTYV7VELAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZQGMYDQMRYGQ . You are receiving this because you were mentioned.Message ID: @.***>

[jli3388]

Thank you @markgoodrich for the suggestion, I just tried ur settings, somehow still not quite work out the way I thought it would be. The resistance level still doesn't much while my watt output is 20-30 lower than the target, only if I slow down my pedaling a lot then it would finally wake up and set the level to 13 or 16. However it would quickly dropped down the 5 (my min resistance setting) as soon as I stand on the pedal and step on it. Not sure if I messed up other settings along the way so I captured the log this morning and hope Roberto can help share some insight on that.

@cagnulein , attached is the log would should showed that the resistance doesn't change when app is targeting ~160+ watt while my output is only 96 or so. Hope u can find what I screwed up and help correct it. Tks

debug-Sat_Mar_2_11_18_13_2024.log.zip

[cagnulein]

thanks i will check it asap Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno sab 2 mar 2024 alle ore 17:46 jli3388 @.***> ha scritto:

Thank you @markgoodrich https://github.com/markgoodrich for the suggestion, I just tried ur settings, somehow still not quite work out the way I thought it would be. The resistance level still doesn't much while my watt output is 20-30 lower than the target, only if I slow down my pedaling a lot then it would finally wake up and set the level to 13 or 16. However it would quickly dropped down the 5 (my min resistance setting) as soon as I stand on the pedal and step on it. Not sure if I messed up other settings along the way so I captured the log this morning and hope Roberto can help share some insight on that.

@cagnulein https://github.com/cagnulein , attached is the log would should showed that the resistance doesn't change when app is targeting ~160+ watt while my output is only 96 or so. Hope u can find what I screwed up and help correct it. Tks

debug-Sat_Mar_2_11_18_13_2024.log.zip https://github.com/cagnulein/qdomyos-zwift/files/14470114/debug-Sat_Mar_2_11_18_13_2024.log.zip

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1974848135, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWC4KTIG3ATU6SBAN7DYWH65XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZUHA2DQMJTGU . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

@jli3388 the watt table that I added it was stricty releated to the watt gain inserted from @markgoodrich (i guess 0.5 right?). So i suggest to use the same 0.5 value

Also, if you want guys, we can try the new dynamic power table that i'm developping here #2175

[jli3388]

@cagnulein I will set the Watt Gain to 0.5 tonight and give it a try.

What's the procedure to get the version with the dynamic power table?

[cagnulein]

ok @jli3388 let me know how it goes

What's the procedure to get the version with the dynamic power table?

it's quite easy in case. i will add your bike in the candidate list for this and we will try it.

[markgoodrich]

I reduced watt gain to 0.45, don't know if the offset goes to hundredths, so it may be 0.4. Closer to my perceived effort and speed on the road. I think it's likely an individual thing. I also have starting resistance set to 9.

On Mon, Mar 4, 2024 at 10:24 AM Roberto Viola @.***> wrote:

ok @jli3388 https://github.com/jli3388 let me know how it goes

What's the procedure to get the version with the dynamic power table?

it's quite easy in case. i will add your bike in the candidate list for this and we will try it.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1976967546, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJMDOIMT4RWVJFUDIBDYWSN37AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZWHE3DONJUGY . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Sorry, I don't understand how to access that power table.

On Mon, Mar 4, 2024 at 10:35 AM Mark Goodrich @.***> wrote:

I reduced watt gain to 0.45, don't know if the offset goes to hundredths, so it may be 0.4. Closer to my perceived effort and speed on the road. I think it's likely an individual thing. I also have starting resistance set to 9.

On Mon, Mar 4, 2024 at 10:24 AM Roberto Viola @.***> wrote:

ok @jli3388 https://github.com/jli3388 let me know how it goes

What's the procedure to get the version with the dynamic power table?

it's quite easy in case. i will add your bike in the candidate list for this and we will try it.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1976967546, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJMDOIMT4RWVJFUDIBDYWSN37AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZWHE3DONJUGY . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Sorry, I don't understand how to access that power table.

On Mon, Mar 4, 2024 at 10:35 AM Mark Goodrich @.***>

wrote:

I reduced watt gain to 0.45, don't know if the offset goes to hundredths,

so it may be 0.4. Closer to my perceived effort and speed on the road. I

think it's likely an individual thing. I also have starting resistance set

to 9.

On Mon, Mar 4, 2024 at 10:24 AM Roberto Viola @.***>

wrote:

ok @jli3388 https://github.com/jli3388 let me know how it goes

What's the procedure to get the version with the dynamic power table?

it's quite easy in case. i will add your bike in the candidate list for

this and we will try it.

—

Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1976967546,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/BF2GTJMDOIMT4RWVJFUDIBDYWSN37AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZWHE3DONJUGY

.

You are receiving this because you were mentioned.Message ID:

@.***>

@markgoodrich are you talking about the dynamic power table? If so, it's just something that I'm adding and it transparent to you. it will just collect the vantage cabins and resistant from your bike and it will dynamically and in real time change the resistance based on this. It's something that you can call AI. :)

[markgoodrich]

Oh. Maybe I understand...:) But still leave watt gain offset as I've got it?

On Mon, Mar 4, 2024 at 10:53 AM Roberto Viola @.***> wrote:

Sorry, I don't understand how to access that power table.

On Mon, Mar 4, 2024 at 10:35 AM Mark Goodrich @.***>

wrote:

I reduced watt gain to 0.45, don't know if the offset goes to hundredths,

so it may be 0.4. Closer to my perceived effort and speed on the road. I

think it's likely an individual thing. I also have starting resistance set

to 9.

On Mon, Mar 4, 2024 at 10:24 AM Roberto Viola @.***>

wrote:

ok @jli3388 https://github.com/jli3388 https://github.com/jli3388 let me know how it goes

What's the procedure to get the version with the dynamic power table?

it's quite easy in case. i will add your bike in the candidate list for

this and we will try it.

—

Reply to this email directly, view it on GitHub

2093 (comment)

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1976967546 ,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/BF2GTJMDOIMT4RWVJFUDIBDYWSN37AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZWHE3DONJUGY

.

You are receiving this because you were mentioned.Message ID:

@.***>

@markgoodrich https://github.com/markgoodrich are you talking about the dynamic power table? If so, it's just something that I'm adding and it transparent to you. it will just collect the vantage cabins and resistant from your bike and it will dynamically and in real time change the resistance based on this. It's something that you can call AI. :)

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1977037718, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJNJGTBB6CCYHMJZUO3YWSRH3AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZXGAZTONZRHA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

yes :)

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno lun 4 mar 2024 alle 18:11 markgoodrich @.***> ha scritto:

Oh. Maybe I understand...:) But still leave watt gain offset as I've got it?

On Mon, Mar 4, 2024 at 10:53 AM Roberto Viola @.***> wrote:

Sorry, I don't understand how to access that power table.

On Mon, Mar 4, 2024 at 10:35 AM Mark Goodrich @.***>

wrote:

I reduced watt gain to 0.45, don't know if the offset goes to hundredths,

so it may be 0.4. Closer to my perceived effort and speed on the road. I

think it's likely an individual thing. I also have starting resistance set

to 9.

On Mon, Mar 4, 2024 at 10:24 AM Roberto Viola @.***>

wrote:

ok @jli3388 https://github.com/jli3388 https://github.com/jli3388 let me know how it goes

What's the procedure to get the version with the dynamic power table?

it's quite easy in case. i will add your bike in the candidate list for

this and we will try it.

—

Reply to this email directly, view it on GitHub

2093 (comment)

< https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1976967546>

,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/BF2GTJMDOIMT4RWVJFUDIBDYWSN37AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZWHE3DONJUGY

.

You are receiving this because you were mentioned.Message ID:

@.***>

@markgoodrich https://github.com/markgoodrich are you talking about the dynamic power table? If so, it's just something that I'm adding and it transparent to you. it will just collect the vantage cabins and resistant from your bike and it will dynamically and in real time change the resistance based on this. It's something that you can call AI. :)

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1977037718>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJNJGTBB6CCYHMJZUO3YWSRH3AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZXGAZTONZRHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1977073899, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBXRXS7LNLIWFZA5MLYWSTMDAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNZXGA3TGOBZHE . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

@jli3388 any news?

[jli3388]

@cagnulein , sorry for the delay. Was pretty busy with work.

I tried again setting the Watt gain to 0.5 and then 0.3. Similar experience, the MyWhoosh app would correctly indicated the watt is way under the the wanted watt but then resistance would still be at a relatively low setting and causing spinout.

Attaching the debug log from last night here, hope you can work some magic and make it work. I will try something else in the meantime or simply use it in manual mode. debug-Sun_Mar_10_23_52_29_2024.log.zip

[cagnulein]

@jli3388 perfect! so let's go with the dynamic power table, i will share you a link for this!

[cagnulein]

@jli3388 done! https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853

What you have to do:

in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions

Google is very slow in these days, reviewing the app on the store, even the beta ones. For this reason, in order to check right now if the patch that I did is right, you can use the android build in the link (check at the bottom of the page in about 1 hour). In order to test it you need first to remove the current QZ version on your phone, install the one that you downloaded. This version is a 15 minutes trial (you can restart it as many times as you want) and I can unlock it if you want, send me an email to roberto.viola83@gmail.com mentioning this ticket and that you are on android. Let me know if you have any questions

[markgoodrich]

Roberto, as usual I don't quite understand.

How do I get the beta?

Do I change watt gain or other settings?

Should I delete/reinstall Q, and if so do I use default settings?

On Tue, Mar 12, 2024, 2:37 AM Roberto Viola @.***> wrote:

@jli3388 https://github.com/jli3388 done! https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853

What you have to do:

in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions

Google is very slow in these days, reviewing the app on the store, even the beta ones. For this reason, in order to check right now if the patch that I did is right, you can use the android build in the link (check at the bottom of the page in about 1 hour). In order to test it you need first to remove the current QZ version on your phone, install the one that you downloaded. This version is a 15 minutes trial (you can restart it as many times as you want) and I can unlock it if you want, send me an email to @.*** mentioning this ticket and that you are on android. Let me know if you have any questions

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1990955107, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJPZGDNBCICP6FGO3HLYX2WC7AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJQHE2TKMJQG4 . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

@markgoodrich download it from here https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853/artifacts/1317711068 then save your settings and put the settings saved on a different directory in order to have a backup then remove qz, and install the new one downloaded then import the new setting and

"in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions"

[markgoodrich]

Thanks, I'll try it tomorrow.

On Tue, Mar 12, 2024 at 12:15 PM Roberto Viola @.***> wrote:

@markgoodrich https://github.com/markgoodrich download it from here https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853/artifacts/1317711068 then save your settings and put the settings saved on a different directory in order to have a backup then remove qz, and install the new one downloaded then import the new setting and

"in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions"

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1992164833, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJLIFVOGNUK6OST6YTLYX4Z3PAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJSGE3DIOBTGM . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

I'm embarrassed to say, once again, I am stumped. After several tries I managed to download the file, named fdroid-android-trial.zip but when I try to open it so I can install it, I get notice: "can't open file".

On Tue, Mar 12, 2024 at 2:08 PM Mark Goodrich @.***> wrote:

Thanks, I'll try it tomorrow.

On Tue, Mar 12, 2024 at 12:15 PM Roberto Viola @.***> wrote:

@markgoodrich https://github.com/markgoodrich download it from here https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853/artifacts/1317711068 then save your settings and put the settings saved on a different directory in order to have a backup then remove qz, and install the new one downloaded then import the new setting and

"in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions"

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1992164833, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJLIFVOGNUK6OST6YTLYX4Z3PAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJSGE3DIOBTGM . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

you have to unzip it

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mer 13 mar 2024 alle 13:27 markgoodrich @.***> ha scritto:

I'm embarrassed to say, once again, I am stumped. After several tries I managed to download the file, named fdroid-android-trial.zip but when I try to open it so I can install it, I get notice: "can't open file".

On Tue, Mar 12, 2024 at 2:08 PM Mark Goodrich @.***> wrote:

Thanks, I'll try it tomorrow.

On Tue, Mar 12, 2024 at 12:15 PM Roberto Viola @.***> wrote:

@markgoodrich https://github.com/markgoodrich download it from here

https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853/artifacts/1317711068 then save your settings and put the settings saved on a different directory in order to have a backup then remove qz, and install the new one downloaded then import the new setting and

"in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions"

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1992164833>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJLIFVOGNUK6OST6YTLYX4Z3PAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJSGE3DIOBTGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994273171, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFXGIZYHXC6V7XU4S3YYBA3FAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGI3TGMJXGE . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

I knew that, I kept banging my head against the wrong wall, finally found the right folder. Face red again.

On Wed, Mar 13, 2024 at 7:36 AM Roberto Viola @.***> wrote:

you have to unzip it

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mer 13 mar 2024 alle 13:27 markgoodrich @.***> ha scritto:

I'm embarrassed to say, once again, I am stumped. After several tries I managed to download the file, named fdroid-android-trial.zip but when I try to open it so I can install it, I get notice: "can't open file".

On Tue, Mar 12, 2024 at 2:08 PM Mark Goodrich @.***> wrote:

Thanks, I'll try it tomorrow.

On Tue, Mar 12, 2024 at 12:15 PM Roberto Viola @.***> wrote:

@markgoodrich https://github.com/markgoodrich download it from here

https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853/artifacts/1317711068

then save your settings and put the settings saved on a different directory in order to have a backup then remove qz, and install the new one downloaded then import the new setting and

"in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions"

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1992164833>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJLIFVOGNUK6OST6YTLYX4Z3PAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJSGE3DIOBTGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994273171>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWFXGIZYHXC6V7XU4S3YYBA3FAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGI3TGMJXGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994294825, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJND5LF2K6BWJSPE2XTYYBB6JAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGI4TIOBSGU . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Haha, no problem!

Il giorno mer 13 mar 2024 alle 13:45 markgoodrich @.***> ha scritto:

I knew that, I kept banging my head against the wrong wall, finally found the right folder. Face red again.

On Wed, Mar 13, 2024 at 7:36 AM Roberto Viola @.***> wrote:

you have to unzip it

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mer 13 mar 2024 alle 13:27 markgoodrich @.***> ha scritto:

I'm embarrassed to say, once again, I am stumped. After several tries I managed to download the file, named fdroid-android-trial.zip but when I try to open it so I can install it, I get notice: "can't open file".

On Tue, Mar 12, 2024 at 2:08 PM Mark Goodrich @.***> wrote:

Thanks, I'll try it tomorrow.

On Tue, Mar 12, 2024 at 12:15 PM Roberto Viola @.***> wrote:

@markgoodrich https://github.com/markgoodrich download it from here

https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853/artifacts/1317711068

then save your settings and put the settings saved on a different directory in order to have a backup then remove qz, and install the new one downloaded then import the new setting and

"in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions"

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1992164833>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJLIFVOGNUK6OST6YTLYX4Z3PAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJSGE3DIOBTGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994273171>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWFXGIZYHXC6V7XU4S3YYBA3FAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGI3TGMJXGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994294825>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJND5LF2K6BWJSPE2XTYYBB6JAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGI4TIOBSGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994315674, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBXPUNFACAPX42EJF3YYBC7RAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGMYTKNRXGQ . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

I gave up on the beta. I am too unfamiliar with tech stuff to be able to figure out what to do. I installed it but couldn't figure out what to do with the "quick spin in each resistance level" instruction. I got on the bike, QZ running, and pedaled, turning the resistance up on step at a time, but I couldn't see any difference, and starting resistance defaulted to 1 instead of 9 as I had set it. Is it just for workouts? Do I leave Erg mode on all the time, even for rides? See? I need Instructions For Dummies.

On Wed, Mar 13, 2024 at 8:09 AM Roberto Viola @.***> wrote:

Haha, no problem!

Il giorno mer 13 mar 2024 alle 13:45 markgoodrich @.***> ha scritto:

I knew that, I kept banging my head against the wrong wall, finally found the right folder. Face red again.

On Wed, Mar 13, 2024 at 7:36 AM Roberto Viola @.***> wrote:

you have to unzip it

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mer 13 mar 2024 alle 13:27 markgoodrich @.***> ha scritto:

I'm embarrassed to say, once again, I am stumped. After several tries I managed to download the file, named fdroid-android-trial.zip but when I try to open it so I can install it, I get notice: "can't open file".

On Tue, Mar 12, 2024 at 2:08 PM Mark Goodrich @.***> wrote:

Thanks, I'll try it tomorrow.

On Tue, Mar 12, 2024 at 12:15 PM Roberto Viola @.***> wrote:

@markgoodrich https://github.com/markgoodrich download it from here

https://github.com/cagnulein/qdomyos-zwift/actions/runs/8245160853/artifacts/1317711068

then save your settings and put the settings saved on a different directory in order to have a backup then remove qz, and install the new one downloaded then import the new setting and

"in this version qz is collecting in real time watt values from your bike along with cadence and resistance. So give a quick spin to all the resistance and all the cadence to fill the internal table. Then enable the erg mode in qz and on zwift as well and the magic should come! Let me know if you have any questions"

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1992164833>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJLIFVOGNUK6OST6YTLYX4Z3PAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJSGE3DIOBTGM>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994273171>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWFXGIZYHXC6V7XU4S3YYBA3FAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGI3TGMJXGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994294825>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJND5LF2K6BWJSPE2XTYYBB6JAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGI4TIOBSGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994315674>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWBXPUNFACAPX42EJF3YYBC7RAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGMYTKNRXGQ>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1994370273, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJK3W2FPBIYOMUG6XWTYYBFXRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJUGM3TAMRXGM . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

I gave up on the beta. I am too unfamiliar with tech stuff to be able to figure out what to do.

so i have to explain it or not? I don't understand your "i gave up"

I installed it but couldn't figure out what to do with the "quick spin in each resistance level" instruction. I got on the bike, QZ running, and pedaled, turning the resistance up on step at a time, but I couldn't see any difference, and starting resistance defaulted to 1 instead of 9 as I had set it. Is it just for workouts? Do I leave Erg mode on all the time, even for rides? See? I need Instructions For Dummies.

what I added in this version is the fact that the ERG table (only the ERG table) is calculated dinamically. So the changes is affected only when you're doing a workout on zwift with the erg mode enabled.

For the resistance to 9, did you reload the settings when you updated the version?

[jli3388]

@cagnulein,

do u have the link to download the beta for iOS? I am on ipad? Last time I believe it was thru testFlight, should it be the same this time around?

[markgoodrich]

I'm sorry, I just saw this, Roberto. I stumbled across a great deal on a used Stages bike last weekend, and have been riding it, connected directly to Zwift. You've been a huge help, and I really appreciate all the efforts you went to to try to get this luddite to understand how to use QZ with that Merach bike. I don't think I need QZ for the Stages.

On Fri, Mar 15, 2024 at 8:20 AM Roberto Viola @.***> wrote:

I gave up on the beta. I am too unfamiliar with tech stuff to be able to figure out what to do.

so i have to explain it or not? I don't understand your "i gave up"

I installed it but couldn't figure out what to do with the "quick spin in each resistance level" instruction. I got on the bike, QZ running, and pedaled, turning the resistance up on step at a time, but I couldn't see any difference, and starting resistance defaulted to 1 instead of 9 as I had set it. Is it just for workouts? Do I leave Erg mode on all the time, even for rides? See? I need Instructions For Dummies.

what I added in this version is the fact that the ERG table (only the ERG table) is calculated dinamically. So the changes is affected only when you're doing a workout on zwift with the erg mode enabled.

For the resistance to 9, did you reload the settings when you updated the version?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1999651463, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJJPR6DUAIDUZABYVSTYYLYTJAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJZGY2TCNBWGM . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

no problem @markgoodrich i guess it's better for you .

qz can give you virtual gears on zwift even for stages bikes and also peloton support if you would like to try

[markgoodrich]

Thanks for the tip!

On Tue, Mar 26, 2024 at 12:46 AM Roberto Viola @.***> wrote:

no problem @markgoodrich https://github.com/markgoodrich i guess it's better for you .

qz can give you virtual gears on zwift even for stages bikes and also peloton support if you would like to try

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-2019440448, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJNGU65B6MSC7Z33GKTY2D4S7AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDAMJZGQ2DANBUHA . You are receiving this because you were mentioned.Message ID: @.***>

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.