Open Meng-ho opened 1 month ago
thanks i will check it asap ( next week)
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno ven 12 apr 2024 alle 17:17 Meng-ho @.***> ha scritto:
Assigned #2291 https://github.com/cagnulein/qdomyos-zwift/issues/2291 to @cagnulein https://github.com/cagnulein.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#event-12450879331, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWHJQGU5YHU27W53DLLY473IDAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJSGQ2TAOBXHEZTGMI . You are receiving this because you were assigned.Message ID: @.***>
Thanks Roberto
On Fri, Apr 12, 2024, 11:27 PM Roberto Viola @.***> wrote:
thanks i will check it asap ( next week)
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno ven 12 apr 2024 alle 17:17 Meng-ho @.***> ha scritto:
Assigned #2291 https://github.com/cagnulein/qdomyos-zwift/issues/2291 to @cagnulein https://github.com/cagnulein.
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2291#event-12450879331>,
. You are receiving this because you were assigned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2051980115, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QEQJV4XZBZMWXQ6QBW3Y474PXAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJRHE4DAMJRGU . You are receiving this because you authored the thread.Message ID: @.***>
hi @Meng-ho are you sure your HRM pro device supports these metrics on bluetooth? I'm sure it's sending them over ANT+ but i'm not sure about bluetooth. Are you able to get this information from its manual? Let me know
Hi Roberto, Below are the specs for Garmin HRM Pro Plus
Physical Specifications
Additional
Regards Meng
On Mon, Apr 15, 2024 at 2:54 PM Roberto Viola @.***> wrote:
hi @Meng-ho https://github.com/Meng-ho are you sure your HRM pro device supports these metrics on bluetooth? I'm sure it's sending them over ANT+ but i'm not sure about bluetooth. Are you able to get this information from its manual? Let me know
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2055686867, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QEWJAANJTNG7UGLRBH3Y5N2RRAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJVGY4DMOBWG4 . You are receiving this because you were mentioned.Message ID: @.***>
yes as I thought the issue is there
- ANT+ running dynamics: yes
this means that the only way to get those are by ANT+
Do you have a phone with ANT+ or do you have a ANT+ dongle?
Yes, I am currently using ANT+ dongle on my Samsung S9 Ultra (Android) tablet.
On Mon, Apr 15, 2024 at 3:23 PM Roberto Viola @.***> wrote:
yes as I thought the issue is there
- ANT+ running dynamics: yes
this means that the only way to get those are by ANT+
Do you have a phone with ANT+ or do you have a ANT+ dongle?
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2055820381, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QESVA7CIULJGSTQGZ7DY5N57BAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJVHAZDAMZYGE . You are receiving this because you were mentioned.Message ID: @.***>
Ok I will investigate a way to collect them! Are you already able to get these metrics from an ANT+ app from the play store?
No, I am not able to get these metrics from an ANT+ app from the play store. I hope QZ will allow me to get these metrics. 😀
On Mon, Apr 15, 2024 at 3:56 PM Roberto Viola @.***> wrote:
Ok I will investigate a way to collect them! Are you already able to get these metrics from an ANT+ app from the play store?
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056010916, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QETTC44HZQKKWOZXNXTY5OB3VAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGAYTAOJRGY . You are receiving this because you were mentioned.Message ID: @.***>
i will check it and in case i will create a new branch for this
D00001679_ANT+_DeviceProfile-_Running_Dynamics_Rev1.1(2) (1).pdf this is the spec file
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
I am not getting HR metric from Ant+.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 5:47 pm, Roberto @.***> wrote:
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
so is it working with any play store app? it must be
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:32 Meng-ho @.***> ha scritto:
I am not getting HR metric from Ant+.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 5:47 pm, Roberto @.***> wrote:
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056608675, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCFSMGJXVPPGNPLIN3Y5O3FXAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYYDQNRXGU . You are receiving this because you were mentioned.Message ID: @.***>
Yes, my plug in Ant+ is working. I cannot have the HR metric shown in QZ when I disable HRM Pro plus from heart and power sensor, and use Ant+ Heart
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 7:33 pm, Roberto @.***> wrote:
so is it working with any play store app? it must be
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:32 Meng-ho @.***> ha scritto:
I am not getting HR metric from Ant+.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 5:47 pm, Roberto @.***> wrote:
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056608675, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCFSMGJXVPPGNPLIN3Y5O3FXAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYYDQNRXGU . You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
create a bug report and i will check it https://developer.android.com/studio/debug/bug-report
this is the first step to get all the metrics
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:39 Meng-ho @.***> ha scritto:
Yes, my plug in Ant+ is working. I cannot have the HR metric shown in QZ when I disable HRM Pro plus from heart and power sensor, and use Ant+ Heart
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 7:33 pm, Roberto @.***> wrote:
so is it working with any play store app? it must be
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:32 Meng-ho @.***> ha scritto:
I am not getting HR metric from Ant+.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 5:47 pm, Roberto @.***> wrote:
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056608675>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWCFSMGJXVPPGNPLIN3Y5O3FXAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYYDQNRXGU>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056621450, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBEIOMWEYK7SHDPKFTY5O4A5AVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYZDCNBVGA . You are receiving this because you were mentioned.Message ID: @.***>
Noted Roberto. I will create the bug report. Thanks
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 7:41 pm, Roberto @.***> wrote:
create a bug report and i will check it https://developer.android.com/studio/debug/bug-report
this is the first step to get all the metrics
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:39 Meng-ho @.***> ha scritto:
Yes, my plug in Ant+ is working. I cannot have the HR metric shown in QZ when I disable HRM Pro plus from heart and power sensor, and use Ant+ Heart
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 7:33 pm, Roberto @.***> wrote:
so is it working with any play store app? it must be
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:32 Meng-ho @.***> ha scritto:
I am not getting HR metric from Ant+.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 5:47 pm, Roberto @.***> wrote:
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056608675>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWCFSMGJXVPPGNPLIN3Y5O3FXAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYYDQNRXGU>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056621450, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBEIOMWEYK7SHDPKFTY5O4A5AVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYZDCNBVGA . You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
Hi Roberto, I have just emailed you the bug report as requested. Please let me know whether these are the information you need.
On Mon, Apr 15, 2024, 7:45 PM @. @.> wrote:
Noted Roberto. I will create the bug report. Thanks
Yahoo Mail: Search, organise, conquer https://mail.onelink.me/107872968?pid=NativePlacement&c=Global_Acquisition_YMktg_315_EmailSignatureGrowth_YahooMail:Search,Organize,Conquer&af_sub1=Acquisition&af_sub2=Global_YMktg&af_sub3=&af_sub4=100000945&af_sub5=OrganizeConquer__Static_
On Mon, 15 Apr 2024 at 7:41 pm, Roberto Viola @.***> wrote:
create a bug report and i will check it https://developer.android.com/studio/debug/bug-report
this is the first step to get all the metrics
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:39 Meng-ho @.***> ha scritto:
Yes, my plug in Ant+ is working. I cannot have the HR metric shown in QZ when I disable HRM Pro plus from heart and power sensor, and use Ant+ Heart
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 7:33 pm, Roberto @.***> wrote:
so is it working with any play store app? it must be
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:32 Meng-ho @.***> ha scritto:
I am not getting HR metric from Ant+.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 5:47 pm, Roberto @.***> wrote:
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub <
https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056608675>,
or unsubscribe <
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056621450>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWBEIOMWEYK7SHDPKFTY5O4A5AVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYZDCNBVGA>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056625043, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QEWBXNCBSAG2IADVNX3Y5O4HRAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYZDKMBUGM . You are receiving this because you were mentioned.Message ID: @.***>
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 8:58 pm, Orca @.> wrote: Hi Roberto,I have just emailed you the bug report as requested. Please let me know whether these are the information you need. On Mon, Apr 15, 2024, 7:45 PM @. @.***> wrote:
Noted Roberto. I will create the bug report. Thanks
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 7:41 pm, Roberto @.***> wrote:
create a bug report and i will check it https://developer.android.com/studio/debug/bug-report
this is the first step to get all the metrics
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:39 Meng-ho @.***> ha scritto:
Yes, my plug in Ant+ is working. I cannot have the HR metric shown in QZ when I disable HRM Pro plus from heart and power sensor, and use Ant+ Heart
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 7:33 pm, Roberto @.***> wrote:
so is it working with any play store app? it must be
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno lun 15 apr 2024 alle 13:32 Meng-ho @.***> ha scritto:
I am not getting HR metric from Ant+.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 5:47 pm, Roberto @.***> wrote:
ok @Meng-ho let's start this. remove the hrm pro from power sensor and heart rate sensor and enable the ant heart setting in qz and restart qz. are you getting hr from ant in this way?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056608675>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWCFSMGJXVPPGNPLIN3Y5O3FXAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYYDQNRXGU>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2056621450, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBEIOMWEYK7SHDPKFTY5O4A5AVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJWGYZDCNBVGA . You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
hi @Meng-ho i checked the log but i don't see qz running on it. Was it running with the ant heart setting enabled and connected to your fitness device?
Sorry about that. I have just email you with QZ running connected to my Garmin HRM Pro and FTM treadmill
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 9:10 pm, Roberto @.***> wrote:
hi @Meng-ho i checked the log but i don't see qz running on it. Was it running with the ant heart setting enabled and connected to your fitness device?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
got it
04-15 21:17:56.626 10401 1977 2417 E HeartChannelController: No Device Found
that's the issue.
in some other play store apps, the HRM is shown like an HEART DEVICE or a Running Dynamic one? Because I'm looking actually for an HR one
Please let me know what other information you need to resolve the issue. 😀
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 9:34 pm, Roberto @.***> wrote:
got it
04-15 21:17:56.626 10401 1977 2417 E HeartChannelController: No Device Found
that's the issue.
in some other play store apps, the HRM is shown like an HEART DEVICE or a Running Dynamic one? Because I'm looking actually for an HR one
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
i will test tomorrow with an Ant Heart rate device that I have and I will check if i can get it. So i can assist you better. I will let you know!
Noted. As always, thanks much Roberto for your top-notch support and the awesome QZ app.
Yahoo Mail: Search, organise, conquer
On Mon, 15 Apr 2024 at 10:20 pm, Roberto @.***> wrote:
i will test tomorrow with an Ant Heart rate device that I have and I will check if i can get it. So i can assist you better. I will let you know!
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
@Meng-ho ok do these steps
https://github.com/cagnulein/qdomyos-zwift/assets/48216/04b14670-a480-4498-993f-1fc55dc5d7eb
And then run again qz. You should see the hr (at least the avg hr and the max).
If so collect another bug report
Let me know!
Hi Roberto I still not able to see the HR metric. I have downloaded Ant plugin sampler. I have sent you the bug report
On Tue, Apr 16, 2024, 6:20 PM Roberto Viola @.***> wrote:
@Meng-ho https://github.com/Meng-ho ok do these steps
https://github.com/cagnulein/qdomyos-zwift/assets/48216/04b14670-a480-4498-993f-1fc55dc5d7eb
And then run again qz. You should see the hr (at least the avg hr and the max).
If so collect another bug report
Let me know!
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058746487, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QESVJ6BRAJ7M3VQ24GDY5T3QFAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYG42DMNBYG4 . You are receiving this because you were mentioned.Message ID: @.***>
but did you see it in the sampler as i did?
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno mar 16 apr 2024 alle 13:25 Meng-ho @.***> ha scritto:
Hi Roberto I still not able to see the HR metric. I have downloaded Ant plugin sampler. I have sent you the bug report
On Tue, Apr 16, 2024, 6:20 PM Roberto Viola @.***> wrote:
@Meng-ho https://github.com/Meng-ho ok do these steps
https://github.com/cagnulein/qdomyos-zwift/assets/48216/04b14670-a480-4498-993f-1fc55dc5d7eb
And then run again qz. You should see the hr (at least the avg hr and the max).
If so collect another bug report
Let me know!
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058746487>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/BHY4QESVJ6BRAJ7M3VQ24GDY5T3QFAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYG42DMNBYG4>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058858533, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDQZBXXSJVNAODI5LLY5UDDBAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYHA2TQNJTGM . You are receiving this because you were mentioned.Message ID: @.***>
Yes. I can see in the sampler but not on Qz
On Tue, Apr 16, 2024, 7:28 PM Roberto Viola @.***> wrote:
but did you see it in the sampler as i did?
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno mar 16 apr 2024 alle 13:25 Meng-ho @.***> ha scritto:
Hi Roberto I still not able to see the HR metric. I have downloaded Ant plugin sampler. I have sent you the bug report
On Tue, Apr 16, 2024, 6:20 PM Roberto Viola @.***> wrote:
@Meng-ho https://github.com/Meng-ho ok do these steps
https://github.com/cagnulein/qdomyos-zwift/assets/48216/04b14670-a480-4498-993f-1fc55dc5d7eb
And then run again qz. You should see the hr (at least the avg hr and the max).
If so collect another bug report
Let me know!
— Reply to this email directly, view it on GitHub <
https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058746487>,
or unsubscribe <
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058858533>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWDQZBXXSJVNAODI5LLY5UDDBAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYHA2TQNJTGM>
. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058862756, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QEV4NITVM7ARFLZA7CDY5UDMFAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYHA3DENZVGY . You are receiving this because you were mentioned.Message ID: @.***>
that's so strange: I had the same your issue this morning and I fixed it in that way. Try, in the plugin sampler to press the "multi device search plugin", select all and press start search. it should find the hr press it and then close it again. then try again in qz (qz must be closed during this process). I will test this also with another HR too
if you want you can also test this build https://github.com/cagnulein/qdomyos-zwift/actions/runs/8704029422/artifacts/1417812609
Google is very slow in these days, reviewing the app on the store, even the beta ones. For this reason, in order to check right now if the patch that I did is right, you can use the android build in the link (check at the bottom of the page in about 1 hour). In order to test it you need first to remove the current QZ version on your phone, install the one that you downloaded. This version is a 15 minutes trial (you can restart it as many times as you want) and I can unlock it if you want, send me an email to roberto.viola83@gmail.com mentioning this ticket and that you are on android. Let me know if you have any questions
I have downloaded the test build link. Do I need to do the setting as what we did previously.
On Tue, Apr 16, 2024, 7:55 PM Roberto Viola @.***> wrote:
if you want you can also test this build https://github.com/cagnulein/qdomyos-zwift/actions/runs/8704029422/artifacts/1417812609
Google is very slow in these days, reviewing the app on the store, even the beta ones. For this reason, in order to check right now if the patch that I did is right, you can use the android build in the link (check at the bottom of the page in about 1 hour). In order to test it you need first to remove the current QZ version on your phone, install the one that you downloaded. This version is a 15 minutes trial (you can restart it as many times as you want) and I can unlock it if you want, send me an email to @.*** mentioning this ticket and that you are on android. Let me know if you have any questions
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058913721, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QEQ4O7YXGF3U2IYCQADY5UGUZAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYHEYTGNZSGE . You are receiving this because you were mentioned.Message ID: @.***>
yes just ant heart
When I start the test build QZ, it shows HRMpro+:216455 found. However on QZ, no metric shown for HR and Running dynamics
On Tue, Apr 16, 2024, 8:22 PM Roberto Viola @.***> wrote:
yes just ant heart
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058961226, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QETPGLLMNYQVWT6CZB3Y5UJZTAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYHE3DCMRSGY . You are receiving this because you were mentioned.Message ID: @.***>
Sorry Roberto. Am I suppose to try the test build 1 hour later. I have just tested it. I will email you for the extension of the trial time to try 1 hour later
On Tue, Apr 16, 2024, 8:33 PM Orca Orca @.***> wrote:
When I start the test build QZ, it shows HRMpro+:216455 found. However on QZ, no metric shown for HR and Running dynamics
On Tue, Apr 16, 2024, 8:22 PM Roberto Viola @.***> wrote:
yes just ant heart
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058961226, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QETPGLLMNYQVWT6CZB3Y5UJZTAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYHE3DCMRSGY . You are receiving this because you were mentioned.Message ID: @.***>
you can run it as many as you want. the 15 minutes is for session. anyway yah sure I can unlock it for you.
Thanks. I will do the test build trial 1hour later. As of now testing, no HR and Running metric shown on QZ. Good news is that I saw HRMPro+ detected when I start the QZ now. 😀
On Tue, Apr 16, 2024, 8:42 PM Roberto Viola @.***> wrote:
you can run it as many as you want. the 15 minutes is for session. anyway yah sure I can unlock it for you.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2058999888, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QEUIRPTI3PCAKT5RH6DY5UMBTAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJYHE4TSOBYHA . You are receiving this because you were mentioned.Message ID: @.***>
ok in case send me again a bug report. it seems like your hrm is not sending the hr in broadcast mode.
Ok. I will send you the bug report 45 minutes later as I need to wait for 1 hour for the test build before I test again.
On Tue, Apr 16, 2024, 8:49 PM Roberto Viola @.***> wrote:
ok in case send me again a bug report. it seems like your hrm is not sending the hr in broadcast mode.
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2059015232, or unsubscribe https://github.com/notifications/unsubscribe-auth/BHY4QEWR6GYQCMH5OP3DC7LY5UM7DAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJZGAYTKMRTGI . You are receiving this because you were mentioned.Message ID: @.***>
I have just email.you the bug report. From the testing of trial build, HR metric is still not shown on QZ. HRMpro+ is detected when starting QZ.
Yahoo Mail: Search, organise, conquer
On Tue, 16 Apr 2024 at 8:56 pm, Orca @.***> wrote: Ok. I will send you the bug report 45 minutes later as I need to wait for 1 hour for the test build before I test again.
On Tue, Apr 16, 2024, 8:49 PM Roberto Viola @.***> wrote:
ok in case send me again a bug report. it seems like your hrm is not sending the hr in broadcast mode.
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
i don't understand which is the difference from my setup and yours. i can read HR from 2 different ANT heart devices with this build. Are you able to record a video from the ant plugin sampler to qz so i will understand if you are doing something wrong?
I have just email video and also screenshots of my settings on Samsung Device. Let me know what are infor you need. Btw, what additional steps I need yo do after the hrm is shown in ant plugin sampler
Yahoo Mail: Search, organise, conquer
On Tue, 16 Apr 2024 at 10:32 pm, Roberto @.***> wrote:
i don't understand which is the difference from my setup and yours. i can read HR from 2 different ANT heart devices with this build. Are you able to record a video from the ant plugin sampler to qz so i will understand if you are doing something wrong?
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
when you see the hrm on the plugin sampler, i just swipe out this app and i open qz, i'm seeing the hr when i do this
I have just tried and still.not able to see the HR metric. It is probably due to my HRM device. I am happy just to go back to using bluetooth for HR metric and ok not to have the rumning metric. The QZ app is still awesome without the running metric and I thank you for your patience in resolving the issue. Thanks again Roberto.
Yahoo Mail: Search, organise, conquer
On Wed, 17 Apr 2024 at 1:19 am, Roberto @.***> wrote:
when you see the hrm on the plugin sampler, i just swipe out this app and i open qz, i'm seeing the hr when i do this
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
i will think about this. i guess i have to implement somehow a direct ant+ connection to it
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno mar 16 apr 2024 alle 19:51 Meng-ho @.***> ha scritto:
I have just tried and still.not able to see the HR metric. It is probably due to my HRM device. I am happy just to go back to using bluetooth for HR metric and ok not to have the rumning metric. The QZ app is still awesome without the running metric and I thank you for your patience in resolving the issue. Thanks again Roberto.
Yahoo Mail: Search, organise, conquer
On Wed, 17 Apr 2024 at 1:19 am, Roberto @.***> wrote:
when you see the hrm on the plugin sampler, i just swipe out this app and i open qz, i'm seeing the hr when i do this
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2059642152, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWGYLZX6QPQULAPM2MLY5VQKJAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJZGY2DEMJVGI . You are receiving this because you were mentioned.Message ID: @.***>
Noted. Thanks Roberto. As for now, I will continue to use bluetooth for my HR metric (without Running Dynamics) and enjoy the awesome QZ for my run. Yahoo Mail: Search, organise, conquer
On Wed, 17 Apr 2024 at 2:35 am, Roberto @.***> wrote:
i will think about this. i guess i have to implement somehow a direct ant+ connection to it
Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud
Il giorno mar 16 apr 2024 alle 19:51 Meng-ho @.***> ha scritto:
I have just tried and still.not able to see the HR metric. It is probably due to my HRM device. I am happy just to go back to using bluetooth for HR metric and ok not to have the rumning metric. The QZ app is still awesome without the running metric and I thank you for your patience in resolving the issue. Thanks again Roberto.
Yahoo Mail: Search, organise, conquer
On Wed, 17 Apr 2024 at 1:19 am, Roberto @.***> wrote:
when you see the hrm on the plugin sampler, i just swipe out this app and i open qz, i'm seeing the hr when i do this
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2291#issuecomment-2059642152, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWGYLZX6QPQULAPM2MLY5VQKJAVCNFSM6AAAAABGEKOXACVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANJZGY2DEMJVGI . You are receiving this because you were mentioned.Message ID: @.***>
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.
Hi Roberto, Need your assistance. Thanks
(1) Screenshots
debug-Fri_Apr_12_21_36_55_2024.log
(2) Description: Running metrics (Ground Contact Time and Vertical Oscillation) are NOT shown. I am only able to see the Stride length metric. Please refer to screenshot 2
(3) Equipment used Spirit CT850 (FTMS treadmill) Garmin HRM Pro Plus ( with Running Dynamics) Samsung S9 Ultra Tablet(Android) to run QZ
(4) QZ setting ( as advised by Roberto ) Power sensor options: Power sensor as Treadmill DISABLED. Power sensor: Garmin HRM Pro Plus
Cadence sensor options: Cadence sensor DISABLED
(5) debug-Fri_Apr_12_22_19_10_2024.log Desired outcome: To be able to see Running metrics for Ground Contact Time and Vertical Oscillation.