Issues with FTP Test and Pace Rides

Fysibisy commented 1 week ago

Sportstech sBike Lite iPad Pro 12.9 Zwift

Basic settings in QZ Fitness:

Zwift ERG mode = OFF
Autoresistance = ON
Zwift resistance offset = 21 (still dont understand, whats a good value for my bike, I am fit and a 100kg rider)
Resistance on Start = 7

Basic settings in Zwift:

ERG mode = OFF

UNEXPECTED BEHAVIOR FOR >> FTP TEST The FTP test runs as follows: Successive zones, in each of which the resistance is increased by 10 watts after one minute until the target wattage is reached. Before the actual test takes place, you ride for 8 minutes to warm up. The cadence for the FTP test should be around 85-90 revolutions. The wattage is specified by Zwift, but the cadence is freely selectable.

PROBLEM Explanation: When warming up, Zwift starts at level 7 on my bike, as preset in the app. At a cadence of 80-90, this corresponds to around 140 watts. The resistance can no longer be changed manually on the bike after the start, but I would like to.

Now the test starts: First section, 50 watts at 80-90 revolutions are required. Zwift does not automatically adjust the resistance to the required 50 watts for the first section and continues at level 7 on my bike. Manual adjustment of the resistance is not possible here either, so the test is aborted.

EXPECTED BEHAVIOR Automatic adjustment of the resistance from Zwift to my bike for the respective sections of 50 - 250 watts for the FTP test at a cadence of 80-90.

Basic settings in QZ Fitness:

Zwift ERG mode = OFF
Autoresistance = ON
Zwift resistance offset = 21
Resistance on Start = 7

Basic settings in Zwift:

ERG mode = OFF

UNEXPECTED BEHAVIOR FOR >> PACE RIDE

What is a pace ride? https://zwiftinsider.com/robopacers/ https://www.youtube.com/watch?v=rbfZI72U3ic&t=2s&ab_channel=ZwiftInsider

Cycling RoboPacers Taylor – 1.1 W/kg Bernie – 1.5 W/kg Miguel – 1.8 W/kg Maria – 2.2 W/kg Coco – 2.6 W/kg Yumi – 2.9 W/kg Jacques – 3.2 W/kg Genie – 3.7 W/kg Constance – 4.2 W/kg

UNEXPECTED BEHAVIOR FOR >> PACE RIDE I would like to take part in a pace ride. I select a pace ride in Zwift and Zwift automatically throws me into the group. Now I have to maintain a pace to keep up with the group. For the first ten seconds after entering the pace, Zwift sets the resistance to 3 and virtually rides the bike itself so that I can get my bearings. After that, Zwift switches to my bike.

PROBLEM: Zwift automatically sets my resistance to 3 and after joining the group ride I can't change the resistance manually on my bike either. Even at a cadence of 100, I am too slow and lose the group. The resistance on the bike itself is no longer increased by Zwift, abort.

EXPECTED BEHAVIOR I can adjust the resistance on my bike so that I can produce more watts and therefore ride faster so that I don't lose touch with the group.

Fysibisy commented 1 week ago

debug-Fri_Apr_19_12_14_01_2024.log

cagnulein commented 1 week ago

Thanks, I will check later today!

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 12:18 Fysibisy @.***> ha scritto:

debug-Fri_Apr_19_12_14_01_2024.log https://github.com/cagnulein/qdomyos-zwift/files/15038872/debug-Fri_Apr_19_12_14_01_2024.log

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066269887, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWESWJ47YCJ5DI2I67LY6DVOJAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWGI3DSOBYG4 . You are receiving this because you were assigned.Message ID: @.***>

cagnulein commented 1 week ago

@Fysibisy log checked. This log report a classic zwift simulation, so no erg ride. So QZ is adjusting the resistnace based on the zwift resistance offset and the resistance requested from zwift.

As I said earlier, you have first of all to decide which is the resistance that you feel like to ride a flat road. For example 12. Then set this to the zwift resistance offset.

QZ will use this value as a base line for any zwift requests.

How many resistance level does your bike have?

Fysibisy commented 1 week ago

@cagnulein I did, as I wrote I was setting up the offset to 21. My bike has 24 resistance levels.

cagnulein commented 1 week ago

got the issue! i'm fixing it right now! send me an email to roberto.viola83 at gmail.com indicating this ticket and if you are on android or iOS. Thanks

Fysibisy commented 1 week ago

Hi @cagnulein, I already sent you E-Mails from sonntag.jan@me.com. I have iOS and iPad OS.

cagnulein commented 1 week ago

perfect, i will send you it in 30 minutes

cagnulein commented 1 week ago

sent! let me know!

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle ore 14:37 Fysibisy @.***> ha scritto:

Hi @cagnulein https://github.com/cagnulein, I already sent you E-Mails from @.***

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066481004, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWC3GP2PV4TB3MIMX63Y6EFW3AVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWGQ4DCMBQGQ . You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

@cagnulein Just downloaded TestFlight, reinstalled the app, activated both ERG modes in the app and in Zwift. Still can’t change the resistance in free ride mode before entering the first zone of my FTP Test.

Deactivated ERG mode and entered the pace ride. Resistance jumped up to 24, no manual change possible.

cagnulein commented 1 week ago

share the debug log. first of all test a free ride

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 17:28 Fysibisy @.***> ha scritto:

@cagnulein https://github.com/cagnulein Just downloaded TestFlight, reinstalled the app, activated both ERG modes in the app and in Zwift. Still can’t change the resistance in free ride mode before entering the first zone of my FTP Test.

Deactivated ERG mode and entered the pace ride. Resistance jumped up to 24, no manual change possible.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066812167, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWAKA3SCY2PEOMLPZY3Y6EZ3TAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHAYTEMJWG4 . You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

@cagnulein tried the FTP first, attached the log.

ERG mode on in both apps

can’t change the resistance manually
Zwift does not change the resistance based on wattage
Set Resistance offset back to 4, 21 was the reason that my resistance jumped up before

debug-Fri_Apr_19_17_32_24_2024.log

cagnulein commented 1 week ago

as i said please try first a free ride and post the log if it doesn't work

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 17:47 Fysibisy @.***> ha scritto:

@cagnulein https://github.com/cagnulein tried the FTP first, attached the log.

ERG mode on in both apps

can’t change the resistance manually

Zwift does not change the resistance based on wattage

debug-Fri_Apr_19_17_32_24_2024.log https://github.com/cagnulein/qdomyos-zwift/files/15042700/debug-Fri_Apr_19_17_32_24_2024.log

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066842765, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDEYXUOCWUPCXFTB6DY6E4BFAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHA2DENZWGU . You are receiving this because you were mentioned.Message ID: @.***>

cagnulein commented 1 week ago

you have to use the gear tile to change the resistance once the auto resistance is engaged

Fysibisy commented 1 week ago

When I switch back to your app and then back to Zwift, Zwift loses the connection. I will update you with a free ride later. Should I turn ERG mode on or off? Mit besten Grüßen,Jan SonntagAm 19.04.2024 um 17:52 schrieb Roberto Viola @.***>: you have to use the gear tile to change the resistance once the auto resistance is engaged

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

cagnulein commented 1 week ago

are you running to qZ and Zwift on the same device? Probably doesn't have enough Memory to handles zwift in background. I suggest to use 2 devices for this

For free rides erg mode on qz must be turned off On Zwift always enable Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 17:55 Fysibisy @.***> ha scritto:

When I switch back to your app and then back to Zwift, Zwift loses the connection. I will update you with a free ride later. Should I turn ERG mode on or off? Mit besten Grüßen,Jan SonntagAm 19.04.2024 um 17:52 schrieb Roberto Viola @.***>: you have to use the gear tile to change the resistance once the auto resistance is engaged

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066855168, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBUNXWM4EWHK3YWVRLY6E45JAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHA2TKMJWHA . You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

Yes, on my iPad Pro. It’s the latest model with M2 Chip, should be powerful enough and enough RAM. I can run QZ on my iPhone and Zwift on my Tablet and they still communicate with each other? Okay, I will check the free ride later. JanAm 19.04.2024 um 17:58 schrieb Roberto Viola @.***>: are you running to qZ and Zwift on the same device? Probably doesn't have

enough Memory to handles zwift in background. I suggest to use 2 devices

for this

For free rides erg mode on qz must be turned off

On Zwift always enable

Roberto Viola

Software engineer and open source enthusiast

http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 17:55 Fysibisy @.***> ha

scritto:

When I switch back to your app and then back to Zwift, Zwift loses the

connection. I will update you with a free ride later. Should I turn ERG

mode on or off? Mit besten Grüßen,Jan SonntagAm 19.04.2024 um 17:52 schrieb

Roberto Viola @.***>:

you have to use the gear tile to change the resistance once the auto

resistance is engaged

—Reply to this email directly, view it on GitHub, or unsubscribe.You are

receiving this because you were mentioned.Message ID: @.***>

—

Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066855168,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWBUNXWM4EWHK3YWVRLY6E45JAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHA2TKMJWHA

.

You are receiving this because you were mentioned.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

cagnulein commented 1 week ago

on iPad the only way to run the two apps together is with the split view. You can't run qz background on iOS.

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 18:01 Fysibisy @.***> ha scritto:

Yes, on my iPad Pro. It’s the latest model with M2 Chip, should be powerful enough and enough RAM. I can run QZ on my iPhone and Zwift on my Tablet and they still communicate with each other? Okay, I will check the free ride later. JanAm 19.04.2024 um 17:58 schrieb Roberto Viola @.***>: are you running to qZ and Zwift on the same device? Probably doesn't have

enough Memory to handles zwift in background. I suggest to use 2 devices

for this

For free rides erg mode on qz must be turned off

On Zwift always enable

Roberto Viola

Software engineer and open source enthusiast

http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 17:55 Fysibisy @.***> ha

scritto:

When I switch back to your app and then back to Zwift, Zwift loses the

connection. I will update you with a free ride later. Should I turn ERG

mode on or off? Mit besten Grüßen,Jan SonntagAm 19.04.2024 um 17:52 schrieb

Roberto Viola @.***>:

you have to use the gear tile to change the resistance once the auto

resistance is engaged

—Reply to this email directly, view it on GitHub, or unsubscribe.You are

receiving this because you were mentioned.Message ID: @.***>

—

Reply to this email directly, view it on GitHub

< https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066855168>,

or unsubscribe

< https://github.com/notifications/unsubscribe-auth/AAALYWBUNXWM4EWHK3YWVRLY6E45JAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHA2TKMJWHA>

.

You are receiving this because you were mentioned.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066866909, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWHGIR4AIJPCLP2TG2TY6E5W5AVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHA3DMOJQHE . You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

Got you. Mit besten Grüßen,Jan SonntagAm 19.04.2024 um 18:04 schrieb Roberto Viola @.***>: on iPad the only way to run the two apps together is with the split view.

You can't run qz background on iOS.

Roberto Viola

Software engineer and open source enthusiast

http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 18:01 Fysibisy @.***> ha

scritto:

Yes, on my iPad Pro. It’s the latest model with M2 Chip, should be

powerful enough and enough RAM. I can run QZ on my iPhone and Zwift on my

Tablet and they still communicate with each other? Okay, I will check the

free ride later. JanAm 19.04.2024 um 17:58 schrieb Roberto Viola

@.***>:

are you running to qZ and Zwift on the same device? Probably doesn't have

enough Memory to handles zwift in background. I suggest to use 2 devices

for this

For free rides erg mode on qz must be turned off

On Zwift always enable

Roberto Viola

Software engineer and open source enthusiast

http://robertoviola.cloud

Il giorno ven 19 apr 2024 alle 17:55 Fysibisy @.***> ha

scritto:

When I switch back to your app and then back to Zwift, Zwift loses the

connection. I will update you with a free ride later. Should I turn ERG

mode on or off? Mit besten Grüßen,Jan SonntagAm 19.04.2024 um 17:52

schrieb

Roberto Viola @.***>:

you have to use the gear tile to change the resistance once the auto

resistance is engaged

—Reply to this email directly, view it on GitHub, or unsubscribe.You are

receiving this because you were mentioned.Message ID: @.***>

—

Reply to this email directly, view it on GitHub

<

https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066855168>,

or unsubscribe

<

https://github.com/notifications/unsubscribe-auth/AAALYWBUNXWM4EWHK3YWVRLY6E45JAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHA2TKMJWHA>

.

You are receiving this because you were mentioned.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are

receiving this because you were mentioned.Message ID: @.***>

—

Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2066866909,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWHGIR4AIJPCLP2TG2TY6E5W5AVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRWHA3DMOJQHE

.

You are receiving this because you were mentioned.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

Hi @cagnulein attached the log for two free rides.

1st Free ride with ERG ON in Zwift and OFF in Qz. Qz open on iPhone, Zwift open on iPad. Can’t change the resistance in Qz manually, no resistance change on the bike. Turned ERG OFF in Zwift, something seems to change in resistance but idk under what conditions. Turned ERG back ON.

2nd Free ride kinda the same behavior but tried to turn off auto resistance in Qz. Something seems to change, but I don’t understand it.

I can do another free ride, if you want but then you need to tell me, what should me turned on and off in the Zwift and Qz Settings.

Attached the log. [Uploading debug-SaApr20_12_28_28_2024.log…]()

cagnulein commented 1 week ago

I can't read the log, it's corrupted. You have to wait the finish of the upload before pushing comment.

As I said in order to change the resistance manually when auto resistance is engaged you have to use the gear tile

Fysibisy commented 1 week ago

@cagnulein debug-SaApr20_12_28_28_2024.log

I pressed very tile I could find which said „resistance“.

cagnulein commented 1 week ago

I said gear not resistance. You have to enable this tile in the tiles settings

Fysibisy commented 1 week ago

@cagnulein Okay so I found the gear tile and did a shirt free ride. I can now change my gears, thank you. When Zwift throws me into the free ride, the resistance is on 7 on my bike, the is set to 0 in Qz. Later for example 3 in Qz translates into 13 on my Bike. What can I do to match those numbers? I will later to the FTP test to keep you updated. Mit besten Grüßen,Jan SonntagAm 20.04.2024 um 13:59 schrieb Roberto Viola @.***>: I said gear not resistance. You have to enable this tile in the tiles settings

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

@cagnulein I did the FTP Test and on two different tests the bike lost the connection. First in the warm up, second time at 300 Watt. Couldn’t reconnect and Zwift aborted. Very annoying. Attached the log.

debug-SaApr20_17_14_07_2024.log

cagnulein commented 1 week ago

@cagnulein Okay so I found the gear tile and did a shirt free ride. I can now change my gears, thank you. When Zwift throws me into the free ride, the resistance is on 7 on my bike, the is set to 0 in Qz. Later for example 3 in Qz translates into 13 on my Bike. What can I do to match those numbers? I will later to the FTP test to keep you updated. Mit besten Grüßen,Jan SonntagAm 20.04.2024 um 13:59 schrieb Roberto Viola @.>: I said gear not resistance. You have to enable this tile in the tiles settings —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.>

You have to choose the right zwift resistance offset, then you can simply override it with the gears tile .In zwift the only thing that's important it's the wattage, so if you are trained you can set a higher zwift resistance offset to do more effort and go faster on zwift

cagnulein commented 1 week ago

@cagnulein I did the FTP Test and on two different tests the bike lost the connection. First in the warm up, second time at 300 Watt. Couldn’t reconnect and Zwift aborted. Very annoying. Attached the log.

debug-SaApr20_17_14_07_2024.log

Where are you running qz? Where zwift? As I told you it must run on split view or on another device

Fysibisy commented 1 week ago

I run Qz on my iPhone and Zwift on my iPad. I use my Apple Watch as the heart rate monitor connected via the Qz App on my Watch, as suggested by you. On 20. Apr 2024, at 19:21, Roberto Viola @.***> wrote:

@cagnulein I did the FTP Test and on two different tests the bike lost the connection. First in the warm up, second time at 300 Watt. Couldn’t reconnect and Zwift aborted. Very annoying. Attached the log. debug-SaApr20_17_14_07_2024.log

Where are you running qz? Where zwift? As I told you it must run on split view or on another device

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

cagnulein commented 1 week ago

Are you using the phone name on zwift or the wahoo one? I suggest the wahoo one. Also qz must running foreground on iPhone

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno sab 20 apr 2024 alle 19:23 Fysibisy @.***> ha scritto:

I run Qz on my iPhone and Zwift on my iPad. I use my Apple Watch as the heart rate monitor connected via the Qz App on my Watch, as suggested by you. On 20. Apr 2024, at 19:21, Roberto Viola @.***> wrote:

@cagnulein I did the FTP Test and on two different tests the bike lost the connection. First in the warm up, second time at 300 Watt. Couldn’t reconnect and Zwift aborted. Very annoying. Attached the log. debug-SaApr20_17_14_07_2024.log

Where are you running qz? Where zwift? As I told you it must run on split view or on another device

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2067735228, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBM4O4NTB3MLA6SCGLY6KQC3AVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANRXG4ZTKMRSHA . You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

@cagnulein Hi. Today I did a ride with ERG on and ERG off. It seems like with ERG on the Bike loses its connection. In the first ride, I lost the connection with ERG on. The free ride without ERG seemed fine. Attached the logs, please have a look at todays date. I chose the Wahoo Kickr as a device as you suggested. As always, Qz on iPhone, Zwift on iPad and HRM via Apple Watch. All apps where running on foreground.

debug-MoApr22_12_36_55_2024.log debug-MoApr22_12_37_42_2024.log

cagnulein commented 1 week ago

hi, maybe you have another log? this is a session only (the first one it's just a session without a connection to the bike). The log has the erg mode disabled

Let me know!

Fysibisy commented 1 week ago

@cagnulein Attached the new log. ERG mode on and after a few minutes the connection is lost.

debug-MoApr22_21_03_54_2024.log

@cagnulein Here another log. This time ERG mode off and still connection lost after 10 min or so. A little bit frustrating. The previous session could also be inside the log because I forgot the stop the log and empty the cache.

debug-MoApr22_21_15_04_2024.log

cagnulein commented 1 week ago

Thanks I will check it tomorrow!

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno lun 22 apr 2024 alle 21:13 Fysibisy @.***> ha scritto:

@cagnulein https://github.com/cagnulein Attached the new log. ERG mode on and after a few minutes the connection is lost.

debug-MoApr22_21_03_54_2024.log https://github.com/cagnulein/qdomyos-zwift/files/15067613/debug-Mo__Apr__22_21_03_54_2024.log

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2070709612, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWD2WZPZGRICNVEJAFDY6VOMHAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZQG4YDSNRRGI . You are receiving this because you were mentioned.Message ID: @.***>

cagnulein commented 1 week ago

checked the logs @Fysibisy there is a bluetooth issue for sure on your bike/phone/enviroment. the bike stops to answer back after a while.

I suggest first to disable the "virtual bluetooth device" in the experimental settings and restart QZ (ONLY THIS SETTING THERE). This should prevent QZ to also create the bridge over bluetooth since you are not using it. Let me know if it's better

Fysibisy commented 1 week ago

@cagnulein Hi, I did a lot of free rides, until now no issues. Will try to attempt a new FTP Test soon. Keep you updated.

cagnulein commented 1 week ago

that's great!

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mer 24 apr 2024 alle 20:52 Fysibisy @.***> ha scritto:

@cagnulein https://github.com/cagnulein Hi, I did a lot of free rides, until now no issues. Will try to attempt a new FTP Test soon. Keep you updated.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2075615064, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWEGXV5EF7AHI25WQFTY675PTAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZVGYYTKMBWGQ . You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

@cagnulein Hi. Did the FTP test today and everything worked fine.

I saved two setting profiles (ERG on and off) and tried to change my FTP value. So I changed the value, saved it, but after restarting the app is back to default. What can I do to fix this?

cagnulein commented 1 week ago

You have to press save on the profile screen when you do a modification, profiles are not autosaved

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 25 apr 2024 alle 18:01 Fysibisy @.***> ha scritto:

@cagnulein https://github.com/cagnulein Hi. Did the FTP test today and everything worked fine.

I saved two setting profiles (ERG on and off) and tried to change my FTP value. So I changed the value, saved it, but after restarting the app is back to default. What can I do to fix this?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2077643233, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWE7CNVY2BYTBB75NETY7ESFRAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZXGY2DGMRTGM . You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

That’s what I did. I’ll try it again and let you know. Mit besten Grüßen,Jan SonntagAm 25.04.2024 um 18:03 schrieb Roberto Viola @.***>: You have to press save on the profile screen when you do a modification,

profiles are not autosaved

Roberto Viola

Software engineer and open source enthusiast

http://robertoviola.cloud

Il giorno gio 25 apr 2024 alle 18:01 Fysibisy @.***> ha

scritto:

@cagnulein https://github.com/cagnulein Hi. Did the FTP test today and

everything worked fine.

I saved two setting profiles (ERG on and off) and tried to change my FTP

value. So I changed the value, saved it, but after restarting the app is

back to default. What can I do to fix this?

—

Reply to this email directly, view it on GitHub

https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2077643233,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/AAALYWE7CNVY2BYTBB75NETY7ESFRAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZXGY2DGMRTGM

.

You are receiving this because you were mentioned.Message ID:

@.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

Fysibisy commented 1 week ago

@cagnulein Okay, seems like I have to close the app every time before changing to another profile. Why is that? It’s a little bit unconventional. Anyway, seems like everything is working fine now. Will this be available in the next App Update?

cagnulein commented 1 week ago

Changing profile it's reloading a lot of different things that requires a restart of the app. That's it :)

The update will be available when I will need to push a hot fix for something widely spread, otherwise I'm keeping update the beta every month or so.

I like to keep things stable for the most of the users

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 25 apr 2024 alle 18:14 Fysibisy @.***> ha scritto:

@cagnulein https://github.com/cagnulein Okay, seems like I have to close the app every time before changing to another profile. Why is that? It’s a little bit unconventional. Anyway, seems like everything is working fine now. Will this be available in the next App Update?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2300#issuecomment-2077668401, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWE6SPA5CCC3VZFPFN3Y7ETWNAVCNFSM6AAAAABGO2J5TKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANZXGY3DQNBQGE . You are receiving this because you were mentioned.Message ID: @.***>

cagnulein commented 1 week ago

You can use the quick actions outside qz to load a profile without restarting it

Fysibisy commented 1 week ago

Ok, thanks. Mit besten Grüßen,Jan SonntagAm 25.04.2024 um 19:04 schrieb Roberto Viola @.***>: You can use the quick actions outside qz to load a profile without restarting it

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>

cagnulein / qdomyos-zwift

Issues with FTP Test and Pace Rides #2300