search

cagnulein / qdomyos-zwift

Zwift bridge for smart treadmills and bike/cyclette
https://www.qzfitness.com/
GNU General Public License v3.0
433 stars 117 forks source link

[BUG] #2433

Closed sha3banii closed 4 months ago

sha3banii commented 4 months ago

Describe the bug I expect to receive my Echolon bike Echelon Connect Sport S Spin Bike with 10" tomorrow. My HRM is HW706 COOSPO Armband Heart Rate Monitor HW706, Bluetooth4.0 ANT+ HR Optical Heart Rate Sensor. I wanted to use my HRM as my Power Meter through the QZ Fitness app. Is this supported? When I open the QZ app, I can see that the HRM device is detected, see attached. How do I select it? I tried selecting it through settings/Heart Rate Options/Heart Belt Name and selecting HW706 then resetting the app. It is still not picked up by default. I tried reaching out to the email "roberto.voila83@gmail.com" but got an automated reply that the email does not exist. Help please.

Screenshots share_2188173577143618164

Smartphone (please complete the following information):

cagnulein commented 4 months ago

you did everything right, you will see the connection when the bike will be see frm QZ, so you will see all the tiles HR included. Let me know!

sha3banii commented 4 months ago

You are correct, everything worked after I hooked up the bike. You are the man !

sha3banii commented 4 months ago

Hi @cagnulein , I am able to see the bike when opening the app. The resistance settings is also shown. The heart monitor seems to be connected. Once I open the Zwift app on the PC, I get image attached. In your instruction video, you showed that I should expect to see my phone Pixel and connect to that over bluetooth. Instead, I see attached. I tried connecting toe ach of those and moving the bike pedals but no power seems to be registering. I am also hearing continous beeping from the bike, once then twice then once. Sometimes it clocks three times. Can you please help? image

sha3banii commented 4 months ago

After some experimentation, I was able to find the pixel 7a device and connect to it. The problem remains, moving the pedal does not change the output power displayed on the Zwift app.

cagnulein commented 4 months ago

wahoo kickr device is perfect, use that one let me know

sha3banii commented 4 months ago

Hi @cagnulein , the bike seems connected to the app. I can see my heart rate see attached. image When I turn the pedals, the power is still not changing at 0. image

cagnulein commented 4 months ago

send me a debug log https://github.com/cagnulein/qdomyos-zwift/wiki/How-do-i-get-the-debug-log-in-case-something-doesn't-work%3F here I guess you changed a setting by mistake

sha3banii commented 4 months ago

Hi @cagnulein , quick update. This morning, I was able to connect everything correctly and use the Zwift app and join a race. This evening, I tried to join again, but I could not. I followed the same sequence as the morning with nothing changing, but it is not connecting. Here is the sequence I followed. 1) Turned on the bike (Echelon Connect Sport S) and logged into my profile 2) Light was blinking blue, then I opened the app, the light was solid blue. The app showed connection to the bike. The heart rate was not showing, but after 20 seconds, it connected. I moved the pedals, but the speed was not changing (stuck at 0). The resistance was also not displayed correctly. 3) I opened the zwift app. It was able to find Wohoo Kickr as I showed in an earlier picture. The same results were showing. Power and cadence was 0 even though I was moving the pedals but the heart rate was displayed correctly. I was able to capture debug log attached.

debug-Wed_Jul_10_21_12_03_2024.log

sha3banii commented 4 months ago

I changed one setting on the app (Bike options/FTMS bike from ECH-SPORTS to Disabled), and now I can connect to Zwift. After riding for 30 seconds, it disconnects and cannot connect back. debug-Wed_Jul_10_21_24_23_2024.log

cagnulein commented 4 months ago

you have the bike in ftms bike setting. disabled it from there and restart QZ. That's the issue

sha3banii commented 4 months ago

I turned off that setting and ran into the same problem again. Please help, the app randomly disconnects from the bike and makes the Zwift session in useful.

debug-Sun_Jul_14_10_20_32_2024.log

cagnulein commented 4 months ago

enable the android notification setting in the experimental settings, it will force android to keep running qz, i guess you have some powersaving settings that are forcing to close it down Let me know

sha3banii commented 4 months ago

Ok now it is enabled. I counted 5 times at least where it was disconnected and the stats where not changing. debug-Sun_Jul_14_10_43_00_2024.log

cagnulein commented 4 months ago

but where? on zwift or in qz? and what you did for restoring them?

cagnulein commented 4 months ago

got it from QZ. is working correctly the echelon app on the same phone? i guess you could be an issue on the bike. let me know

sha3banii commented 4 months ago

@cagnulein update from my side. I filed a support ticket with Echelon to replace the bluetooth module. I received it today, replaced the part and put the bike back together. I was able to reliably connect to the QZ app and to Zwift. Everything is working perfectly. You are the man !

cagnulein commented 4 months ago

Glad to hear it!

Il giorno sab 27 lug 2024 alle 04:39 sha3banii @.***> ha scritto:

@cagnulein https://github.com/cagnulein update from my side. I filed a support ticket with Echelon to replace the bluetooth module. I received it today, replaced the part and put the bike back together. I was able to reliably connect to the QZ app and to Zwift. Everything is working perfectly. You are the man !

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2433#issuecomment-2253717837, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFYSHJEGEJSCKMJASTZOMB5DAVCNFSM6AAAAABKPSL5AKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENJTG4YTOOBTG4 . You are receiving this because you were mentioned.Message ID: @.***>