search

cambridgehackers / connectal

Connectal is a framework for software-driven hardware development.
MIT License
159 stars 46 forks source link

Adding Connectal Support to DE5 Net Board #156

Open NP95 opened 4 years ago

NP95 commented 4 years ago

I have started using Bluespec and I am really awed by the change in paradigm I am having writing HDL. So I have a project in which I plan to use Bluespec, however the board I have is an Altera DE5 Net board, if I wanted to add support to the board what are the steps I have to do?

hanw commented 4 years ago

DE5 board is 'unofficially' supported. It is not mentioned in the README.

The board type is 'de5', for example, to build the echo example, you can use: make -C examples/echo build.de5

You can try to search for the PRs made by hanw back in 2014 - 2015, that's when the support for DE5 was added.

jameyhicks commented 4 years ago

@NP95 did you have any luck with the DE5 board?

NP95 commented 4 years ago

Hi Jamey,

Immediately after that I was busy in other work and after that I haven't had access to the board in the last 2.5 months. Will update once I have access to it.

On Wed, 22 Apr 2020, 19:23 Jamey Hicks, notifications@github.com wrote:

@NP95 https://github.com/NP95 did you have any luck with the DE5 board?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cambridgehackers/connectal/issues/156#issuecomment-617792770, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABGGCBQNCKQBBST4UKSHWDLRN3ZEHANCNFSM4KL4ATKQ .

hanw commented 4 years ago

@NP95 Note that last time DE5 was tested was using Quartus 15.1. I have just tried Quartus 19.2 a few days ago and found that the qsys-generate tool has changed quite a bit and the existing tcl script for for de5 is no longer compatible. You will need to spend a bit of time bring the tcl script up-to-date.