search

camrbuss / pinci

Super thin split PCB keyboard using rp2040 chips running Rust
MIT License
123 stars 7 forks source link

Are there any build guide? #7

Closed KentaroKoga closed 2 years ago

KentaroKoga commented 2 years ago

I'm beginner to raspberry pi keyboard so just worried if I can build and set it up properly without guide. I have experience of building sweep and cantor but not raspberry pi.

I'm sorry if you already put a guide somewhere and I just didn't find it.

Thanks a lot for making this✨

camrbuss commented 2 years ago

I don't have a build guide as you just solder on the Raspberry Pi Pico, the one resistor (popl or popr), the 3.5mm jack, and then the switches.

Besides soldering the resistor and jack before everything else, there is no special order you need to follow.

I'm happy to answer questions if you decide to attempt the build. If you are new to diy electronics this might not be the best start, but it is certainly possible.

Thanks for the interest! 🦀

KentaroKoga commented 2 years ago

Thanks for your reply! I think I'll give it a try:)