search

captain-amygdala / pistorm

68k Hardware Emulator
MIT License
737 stars 103 forks source link

After network setup on Pi I can't login through SSH anymore #73

Open mhadjih2 opened 10 months ago

mhadjih2 commented 10 months ago

After the install described to activate networking in Amiga from the maual, i.e. install PIP3 and tun-adapter, but after this I can't login through SSH anymore to the Pi.

How to change this so SSH keeps workinh, because it was handy for SFTP etc.?

Edit: I can see through issuing command IFCONFIG that wlan0 is still up and on the same ip-address as before, only tap0 has an address that's different, 192.168.2.1 instead of wlan0, which has 192.168.2.18, but I still can't login through SSH. It refuses connection when I try, when applying the same method as before.

Maybe I need to bridge the networks?

mhadjih2 commented 10 months ago

As I am on my homenetwork with the connected Pi, 192.168.2.18 and the tap0 is configured out-of-the-box for 192.168.2.1 (from the PiStorm network-install command: sudo cp /home/pi/pistorm/a314/files_pi/eth-config-pi/tap0 /etc/network/interfaces.d/), both interfaces conflict due to being in the same ip-range, 192.168.2.0/24. I changed the ip-address in the file 'eth-config-pi' to 192.168.3.1 before issuing the copy-command as stated above, from the manual.

Maybe someone who runs into the same problem will benefit.

Issue closed, thanks!