search

captain-coredump / weatherflow-udp

WeatherFlow Personal Weather Station driver for weewx, via UDP broadcast packets
GNU General Public License v3.0
54 stars 19 forks source link

Problem with MacOSX Install #13

Open ispybadguys opened 4 years ago

ispybadguys commented 4 years ago

I must say that I am only parroting your instructions and I am really a fish out of water here. I did get weewx installed and working but I got to the following point and got this error. I trued it without the sudo and has a permission problemm

MacBook-Pro:weewx Kurt$ sudo ./bin/wee_extension --install weatherflow-udp-master.zip Password: Request to install 'weatherflow-udp-master.zip' Extracting from zip archive weatherflow-udp-master.zip Traceback (most recent call last): File "./bin/wee_extension", line 88, in main() File "./bin/wee_extension", line 80, in main ext.install_extension(options.install) File "/Users/Shared/weewx/bin/weecfg/extension.py", line 113, in install_extension self.tmpdir, self.logger) File "/Users/Shared/weewx/bin/weecfg/init.py", line 1773, in extract_zip with open(path, 'wb') as dest_file: FileNotFoundError: [Errno 2] No such file or directory: '/var/tmp/__MACOSX/._weatherflow-udp-master'

tkeffer commented 4 years ago

Don't know what's happening, and I don't know if this will help, but try unzipping the extension file first, then installing from the resultant subdirectory:

unzip weatherflow-udp-master.zip
sudo ./bin/wee_extension --install=weatherflow-udp-master

This way, the OS will not have to use the temporary directory in /var/tmp

ispybadguys commented 4 years ago

Thanks for the quick reply.  Ill try that

Kurt

⁣Get BlueMail for Android ​

On Sep 7, 2020, 6:55 AM, at 6:55 AM, Tom Keffer notifications@github.com wrote:

Don't know what's happening, and I don't know if this will help, but try unzipping the extension file first, then installing from the resultant subdirectory:

unzip weatherflow-udp-master.zip
sudo ./bin/wee_extension --install=weatherflow-udp-master

This way, the OS will not have to use the temporary directory in /var/tmp

-- You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub: https://github.com/captain-coredump/weatherflow-udp/issues/13#issuecomment-688307009

ispybadguys commented 4 years ago

Tom

This seemed to work however the simulator seems to be still running. Is there something else I need to do?

Thanks

Kurt

MacBook-Pro:weewx Kurt$ pwd /Users/Shared/weewx MacBook-Pro:weewx Kurt$ sudo ./bin/wee_extension --install=weatherflow-udp-master Password: Request to install 'weatherflow-udp-master' Saving installer file to /Users/Shared/weewx/bin/user/installer/weatherflowudp Finished installing extension 'weatherflow-udp-master’

MacBook-Pro:weewx Kurt$ sudo python3 ./bin/weewxd weewx.conf LOOP: 2020-09-07 18:41:17 MDT (1599525677) UV: 0, altimeter: 38.15242390367712, appTemp: 28.46010918752483, barometer: 31.099999998967093, beaufort: 0, cloudbase: 7051.323176426526, consBatteryVoltage: 12.66241451462831, dateTime: 1599525677, dewpoint: 27.203560993945757, heatindex: 32.67858297022247, heatingVoltage: 12.441644453067967, humidex: 32.67858297022247, inDewpoint: 31.079533828013187, inHumidity: 29.999999958683617, inTemp: 63.00000002065819, inTempBatteryStatus: 0, maxSolarRad: 383.3030961672482, outHumidity: 79.99999996901272, outTemp: 32.67858297022247, outTempBatteryStatus: 0, pressure: 31.099999998967093, radiation: 0, rain: 0, rainBatteryStatus: 0, rainRate: 0.0, referenceVoltage: 11.074437696723919, rxCheckPercent: 88.96206099534629, supplyVoltage: 12.0, txBatteryStatus: 0, usUnits: 1, windBatteryStatus: 0, windDir: 359.9999998140763, windGust: 6.197456769996279e-09, windGustDir: 359.9999998140763, windSpeed: 5.164547900449179e-09, windchill: 32.67858297022247 LOOP: 2020-09-07 18:41:19 MDT (1599525679) UV: 0, altimeter: 38.15242389392627, appTemp: 28.45807365032865, barometer: 31.099999990703814, beaufort: 0, cloudbase: 7051.312706309994, consBatteryVoltage: 11.867127566335324, dateTime: 1599525679, dewpoint: 27.20178958368346, heatindex: 32.67676549144743, heatingVoltage: 11.624723425475322, humidex: 32.67676549144743, inDewpoint: 31.07953369929752, inHumidity: 29.999999628152565, inTemp: 63.00000018592372, inTempBatteryStatus: 1, maxSolarRad: 383.434489

On Sep 7, 2020, at 6:55 AM, Tom Keffer notifications@github.com wrote:

sudo ./bin/wee_extension --install=weatherflow-udp-master

tkeffer commented 4 years ago

Yes. You've installed the WF driver, now you have to tell WeeWX to use it:

./bin/wee_config --reconfigure

Then answer the questions.

ispybadguys commented 4 years ago

Thanks for you help in getting me this far. So I have the system running and I have a problem I don't understand. With the reconfiguration I was able to select the Tempest UDP driver. The whew webpage now updates but it still says simulator and has fake data. I assumed that perhaps this was some kind Catalina problem with permissions so I grabbed a Raspberry Pi and installed everything on that. It does the same thing as the MacBook. Here is what the syslog says:

pi@raspberrypi:~/weewx-4.1.1 $ sudo tail -f /var/log/syslog Sep 13 14:50:29 raspberrypi weewx[14590] INFO __main__: Starting up weewx version 4.1.1 Sep 13 14:50:29 raspberrypi weewx[14590] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb' Sep 13 14:50:29 raspberrypi weewx[14590] INFO weewx.manager: Starting backfill of daily summaries Sep 13 14:50:29 raspberrypi weewx[14590] INFO weewx.engine: Starting main packet loop. Sep 13 14:50:29 raspberrypi /weewxd: weatherflowudp: MainThread: Listening for UDP broadcasts to IP address <broadcast> on port 50222, with timeout 90 and share_socket False... Sep 13 14:55:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 14:55:00 MDT (1600030500) to database 'weewx.sdb' Sep 13 14:55:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 14:55:00 MDT (1600030500) to daily summary in 'weewx.sdb' Sep 13 14:55:18 raspberrypi weewx[27593] INFO weewx.cheetahgenerator: Generated 8 files for report SeasonsReport in 1.52 seconds Sep 13 14:55:19 raspberrypi weewx[27593] INFO weewx.imagegenerator: Generated 15 images for report SeasonsReport in 0.98 seconds Sep 13 14:55:19 raspberrypi weewx[27593] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx Sep 13 14:59:09 raspberrypi systemd[1]: Started Session c6 of user pi. Sep 13 15:00:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:00:00 MDT (1600030800) to database 'weewx.sdb' Sep 13 15:00:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:00:00 MDT (1600030800) to daily summary in 'weewx.sdb' Sep 13 15:00:18 raspberrypi weewx[27593] INFO weewx.cheetahgenerator: Generated 8 files for report SeasonsReport in 1.50 seconds Sep 13 15:00:26 raspberrypi weewx[27593] INFO weewx.imagegenerator: Generated 45 images for report SeasonsReport in 8.13 seconds Sep 13 15:00:26 raspberrypi weewx[27593] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx Sep 13 15:05:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:05:00 MDT (1600031100) to database 'weewx.sdb' Sep 13 15:05:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:05:00 MDT (1600031100) to daily summary in 'weewx.sdb' Sep 13 15:05:18 raspberrypi weewx[27593] INFO weewx.cheetahgenerator: Generated 8 files for report SeasonsReport in 1.56 seconds Sep 13 15:05:19 raspberrypi weewx[27593] INFO weewx.imagegenerator: Generated 15 images for report SeasonsReport in 0.98 seconds Sep 13 15:05:19 raspberrypi weewx[27593] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx Sep 13 15:09:01 raspberrypi systemd[1]: Starting Clean php session files... Sep 13 15:09:01 raspberrypi CRON[18797]: (root) CMD ( [ -x /usr/lib/php/sessionclean ] && if [ ! -d /run/systemd/system ]; then /usr/lib/php/sessionclean; fi) Sep 13 15:09:01 raspberrypi systemd[1]: phpsessionclean.service: Succeeded. Sep 13 15:09:01 raspberrypi systemd[1]: Started Clean php session files. Sep 13 15:09:47 raspberrypi rngd[371]: stats: bits received from HRNG source: 300064 Sep 13 15:09:47 raspberrypi rngd[371]: stats: bits sent to kernel pool: 243072 Sep 13 15:09:47 raspberrypi rngd[371]: stats: entropy added to kernel pool: 243072 Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS 140-2 successes: 15 Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS 140-2 failures: 0 Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Monobit: 0 Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Poker: 0 Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Runs: 0 Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Long run: 0 Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Continuous run: 0 Sep 13 15:09:47 raspberrypi rngd[371]: stats: HRNG source speed: (min=683.724; avg=850.380; max=1002.837)Kibits/s Sep 13 15:09:47 raspberrypi rngd[371]: stats: FIPS tests speed: (min=3.115; avg=7.498; max=16.191)Mibits/s Sep 13 15:09:47 raspberrypi rngd[371]: stats: Lowest ready-buffers level: 2 Sep 13 15:09:47 raspberrypi rngd[371]: stats: Entropy starvations: 0 Sep 13 15:09:47 raspberrypi rngd[371]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us Sep 13 15:10:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:10:00 MDT (1600031400) to database 'weewx.sdb' Sep 13 15:10:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:10:00 MDT (1600031400) to daily summary in 'weewx.sdb' Sep 13 15:10:16 raspberrypi weewx[27593] INFO weewx.engine: Garbage collected 8048 objects in 0.04 seconds Sep 13 15:10:18 raspberrypi weewx[27593] INFO weewx.cheetahgenerator: Generated 8 files for report SeasonsReport in 1.50 seconds Sep 13 15:10:19 raspberrypi weewx[27593] INFO weewx.imagegenerator: Generated 15 images for report SeasonsReport in 0.97 seconds Sep 13 15:10:19 raspberrypi weewx[27593] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx Sep 13 15:15:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:15:00 MDT (1600031700) to database 'weewx.sdb' Sep 13 15:15:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-13 15:15:00 MDT (1600031700) to daily summary in 'weewx.sdb' Sep 13 15:15:18 raspberrypi weewx[27593] INFO weewx.cheetahgenerator: Generated 8 files for report SeasonsReport in 1.92 seconds Sep 13 15:15:19 raspberrypi weewx[27593] INFO weewx.imagegenerator: Generated 15 images for report SeasonsReport in 0.99 seconds Sep 13 15:15:19 raspberrypi weewx[27593] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx Sep 13 15:17:01 raspberrypi CRON[20551]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Sep 13 15:17:15 raspberrypi weewx[14590] INFO weewx.engine: Main loop exiting. Shutting engine down. Sep 13 15:17:15 raspberrypi weewx[14590] CRITICAL __main__: Keyboard interrupt. Sep 13 15:17:24 raspberrypi weewx[20654] INFO __main__: Initializing weewx version 4.1.1 Sep 13 15:17:24 raspberrypi weewx[20654] INFO __main__: Using Python 3.7.3 (default, Jul 25 2020, 13:03:44) #012[GCC 8.3.0] Sep 13 15:17:24 raspberrypi weewx[20654] INFO __main__: Platform Linux-5.4.51-v7+-armv7l-with-debian-10.4 Sep 13 15:17:24 raspberrypi weewx[20654] INFO __main__: Locale is 'en_US.UTF-8' Sep 13 15:17:24 raspberrypi weewx[20654] INFO __main__: Using configuration file /home/weewx/weewx.conf Sep 13 15:17:24 raspberrypi weewx[20654] INFO __main__: Debug is 1 Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG __main__: Initializing engine Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.engine: Loading station type WeatherFlowUDP (user.weatherflowudp) Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: driver version is 1.10 Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: sensor map is {} Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: *** Sensor names per packet type Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: packet obs_air: ('time_epoch', 'station_pressure', 'air_temperature', 'relative_humidity', 'lightning_strike_count', 'lightning_strike_avg_distance', 'battery', 'report_interval') Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: packet obs_sky: ('time_epoch', 'illuminance', 'uv', 'rain_accumulated', 'wind_lull', 'wind_avg', 'wind_gust', 'wind_direction', 'battery', 'report_interval', 'solar_radiation', 'local_day_rain_accumulation', 'precipitation_type', 'wind_sample_interval') Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: packet rapid_wind: ('time_epoch', 'wind_speed', 'wind_direction') Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: packet evt_precip: time_epoch Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: packet evt_strike: ('time_epoch', 'distance', 'energy') Sep 13 15:17:24 raspberrypi /weewxd: weatherflowudp: MainThread: packet obs_st: ('time_epoch', 'wind_lull', 'wind_avg', 'wind_gust', 'wind_direction', 'wind_sample_interval', 'station_pressure', 'air_temperature', 'relative_humidity', 'illuminance', 'uv', 'solar_radiation', 'rain_accumulated', 'precipitation_type', 'lightning_strike_avg_distance', 'lightning_strike_count', 'battery', 'report_interval') Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.engine.StdConvert Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.engine: StdConvert target unit is 0x1 Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.engine.StdQC Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.engine.StdQC Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.manager: Daily summary version is 2.0 Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.wxservices: The following values will be calculated: pressure=prefer_hardware, altimeter=prefer_hardware, appTemp=prefer_hardware, barometer=prefer_hardware, beaufort=prefer_hardware, cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware, heatindex=prefer_hardware, humidex=prefer_hardware, inDewpoint=prefer_hardware, maxSolarRad=prefer_hardware, rainRate=prefer_hardware, windchill=prefer_hardware, windrun=prefer_hardware Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.wxservices: The following algorithms will be used for calculations: altimeter=aaASOS, maxSolarRad=RS Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.wxservices.StdWXCalculate Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.engine.StdArchive Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.engine: Archive will use data binding wx_binding Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.engine: Record generation will be attempted in 'hardware' Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.engine: Using archive interval of 300 seconds (specified in weewx configuration) Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1 Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.restx: StationRegistry: Station will be registered. Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.restx.StdStationRegistry Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.restx.StdWunderground Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.restx: Wunderground: Posting not enabled. Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.restx: PWSweather: Posting not enabled. Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.restx.StdCWOP Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.restx: CWOP: Posting not enabled. Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.restx.StdWOW Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.restx: WOW: Posting not enabled. Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS Sep 13 15:17:24 raspberrypi weewx[20654] INFO weewx.restx: AWEKAS: Posting not enabled. Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.engine.StdPrint Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Loading service weewx.engine.StdReport Sep 13 15:17:24 raspberrypi weewx[20654] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport

tkeffer commented 4 years ago

  1. I can't make any sense of that log. It needs some newlines.

  2. On the chance that wee_config was using the wrong configuration file, specify the file path on the command line. For example, if you used the setup.py method, the configuration file will be at /home/weewx/weewx.conf. So, the command becomes

    ./bin/wee_config --reconfigure /home/weewx/weewx.conf

  3. What is the result of

    grep station_type /home/weewx/weewx.conf
ispybadguys commented 4 years ago

Sorry about that. I should not have pasted it as code. Here is a run form the command "sudo bin/weewxd ./weewx.conf"

pi@raspberrypi:~/weewx-4.1.1 $ sudo tail -f /var/log/syslog Sep 14 17:01:27 raspberrypi weewx[8968] DEBUG weewx.engine: Loading service weewx.engine.StdPrint Sep 14 17:01:27 raspberrypi weewx[8968] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint Sep 14 17:01:27 raspberrypi weewx[8968] DEBUG weewx.engine: Loading service weewx.engine.StdReport Sep 14 17:01:27 raspberrypi weewx[8968] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport Sep 14 17:01:27 raspberrypi weewx[8968] INFO main: Starting up weewx version 4.1.1 Sep 14 17:01:27 raspberrypi weewx[8968] DEBUG weewx.engine: Station does not support reading the time Sep 14 17:01:27 raspberrypi weewx[8968] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb' Sep 14 17:01:27 raspberrypi weewx[8968] INFO weewx.manager: Starting backfill of daily summaries Sep 14 17:01:27 raspberrypi weewx[8968] INFO weewx.engine: Starting main packet loop. Sep 14 17:01:27 raspberrypi /weewxd: weatherflowudp: MainThread: Listening for UDP broadcasts to IP address on port 50222, with timeout 90 and share_socket False... Sep 14 17:05:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-14 17:05:00 MDT (1600124700) to database 'weewx.sdb' Sep 14 17:05:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-14 17:05:00 MDT (1600124700) to daily summary in 'weewx.sdb' Sep 14 17:05:18 raspberrypi weewx[27593] INFO weewx.cheetahgenerator: Generated 8 files for report SeasonsReport in 1.55 seconds Sep 14 17:05:19 raspberrypi weewx[27593] INFO weewx.imagegenerator: Generated 15 images for report SeasonsReport in 1.18 seconds Sep 14 17:05:19 raspberrypi weewx[27593] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx Sep 14 17:09:01 raspberrypi systemd[1]: Starting Clean php session files... Sep 14 17:09:01 raspberrypi CRON[10807]: (root) CMD ( [ -x /usr/lib/php/sessionclean ] && if [ ! -d /run/systemd/system ]; then /usr/lib/php/sessionclean; fi) Sep 14 17:09:01 raspberrypi systemd[1]: phpsessionclean.service: Succeeded. Sep 14 17:09:01 raspberrypi systemd[1]: Started Clean php session files. Sep 14 17:09:47 raspberrypi rngd[371]: stats: bits received from HRNG source: 1080064 Sep 14 17:09:47 raspberrypi rngd[371]: stats: bits sent to kernel pool: 1022560 Sep 14 17:09:47 raspberrypi rngd[371]: stats: entropy added to kernel pool: 1022560 Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS 140-2 successes: 54 Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS 140-2 failures: 0 Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Monobit: 0 Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Poker: 0 Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Runs: 0 Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Long run: 0 Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS 140-2(2001-10-10) Continuous run: 0 Sep 14 17:09:47 raspberrypi rngd[371]: stats: HRNG source speed: (min=676.594; avg=860.142; max=1002.837)Kibits/s Sep 14 17:09:47 raspberrypi rngd[371]: stats: FIPS tests speed: (min=3.115; avg=8.344; max=16.400)Mibits/s Sep 14 17:09:47 raspberrypi rngd[371]: stats: Lowest ready-buffers level: 2 Sep 14 17:09:47 raspberrypi rngd[371]: stats: Entropy starvations: 0 Sep 14 17:09:47 raspberrypi rngd[371]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us Sep 14 17:10:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-14 17:10:00 MDT (1600125000) to database 'weewx.sdb' Sep 14 17:10:16 raspberrypi weewx[27593] INFO weewx.manager: Added record 2020-09-14 17:10:00 MDT (1600125000) to daily summary in 'weewx.sdb' Sep 14 17:10:18 raspberrypi weewx[27593] INFO weewx.cheetahgenerator: Generated 8 files for report SeasonsReport in 1.52 seconds Sep 14 17:10:19 raspberrypi weewx[27593] INFO weewx.imagegenerator: Generated 15 images for report SeasonsReport in 1.16 seconds Sep 14 17:10:19 raspberrypi weewx[27593] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx

captain-coredump commented 4 years ago

First thing that jumps out is that the sensor_map section isn't being loaded:

Sep 13 (canary:event?ts=621717449.00)15:17:24 (canary:event?ts=621803849.00) raspberrypi /weewxd: weatherflowudp: MainThread: sensor map is {}

It is either in the wrong location in weewx.conf, or else the indents are messed up. Python is extremely picky with indents.....

-- Sent from my iEtch-A-Sketch via Subspace

captain-coredump commented 4 years ago

Another MacOS gotcha is the udp_address setting needs to be 0.0.0.0, and not the Linux "" default:

udp_address = udp_address = 0.0.0.0 # udp_address = 255.255.255.255 This is the broadcast address that we should be listening on for packets. If the driver throws an error on start, try one of the other commented-out options (in order). This seems to be platform-specific. All three work on Debian Linux and my Raspberry Pi, but only 0.0.0.0 works on my Macbook running OS-X or MacOS. Don't ask about Windows, since I don't have a test platform to see

if it will even work.

-- Sent from my iEtch-A-Sketch via Subspace

On Monday, Sep 14, 2020 at 7:16 PM, Arthur Emerson <notifications@github.com (mailto:notifications@github.com)> wrote: First thing that jumps out is that the sensor_map section isn't being loaded:

Sep 13 (canary:event?ts=621717449.00)15:17:24 (canary:event?ts=621803849.00) raspberrypi /weewxd: weatherflowudp: MainThread: sensor map is {}

It is either in the wrong location in weewx.conf, or else the indents are messed up. Python is extremely picky with indents.....

-- Sent from my iEtch-A-Sketch via Subspace

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub (https://github.com/captain-coredump/weatherflow-udp/issues/13#issuecomment-692367538), or unsubscribe (https://github.com/notifications/unsubscribe-auth/AEHILTKMIYQNN4G2WXFMT6LSF2P3HANCNFSM4Q5MP42Q).

ispybadguys commented 4 years ago

Thanks This is helpful.

Here is my whew.conf file. and ideas of what is wrong with sensor map?

WEEWX CONFIGURATION FILE

#

Copyright (c) 2009-2019 Tom Keffer tkeffer@gmail.com

See the file LICENSE.txt for your rights.

##############################################################################

This section is for general configuration information.

Set to 1 for extra debug info, otherwise comment it out or set to zero

debug = 1

Root directory of the weewx data file hierarchy for this station

WEEWX_ROOT = /home/weewx

Whether to log successful operations

log_success = True

Whether to log unsuccessful operations

log_failure = True

How long to wait before timing out a socket (FTP, HTTP) connection

socket_timeout = 20

Do not modify this. It is used when installing and updating weewx.

version = 4.1.1

##############################################################################

This section is for information about the station.

[Station]

# Description of the station location
location = "Albuquerque,NM"

# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 35.1885
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = -106.51544

# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 5851.1, foot    # Choose 'foot' or 'meter' for unit

# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = WeatherFlowUDP

# If you have a website, you may specify an URL
station_url = https://tempestwx.com/station/27577/grid

# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1

# Start of week (0=Monday, 6=Sunday)
week_start = 6

##############################################################################

[WeatherFlowUDP] driver = user.weatherflowudp

##############################################################################

This section is for uploading data to Internet sites

[StdRESTful]

[[StationRegistry]]
    # To register this weather station with weewx, set this to true
    register_this_station = true

[[AWEKAS]]
    # This section is for configuring posts to AWEKAS.

    # If you wish to do this, set the option 'enable' to true,
    # and specify a username and password.
    # To guard against parsing errors, put the password in quotes.
    enable = false
    username = replace_me
    password = replace_me

[[CWOP]]
    # This section is for configuring posts to CWOP.

    # If you wish to do this, set the option 'enable' to true,
    # and specify the station ID (e.g., CW1234).
    enable = false
    station = replace_me

# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)

[[PWSweather]]
    # This section is for configuring posts to PWSweather.com.

    # If you wish to do this, set the option 'enable' to true,
    # and specify a station and password.
    # To guard against parsing errors, put the password in quotes.
    enable = false
    station = replace_me
    password = replace_me

[[WOW]]
    # This section is for configuring posts to WOW.

    # If you wish to do this, set the option 'enable' to true,
    # and specify a station and password.
    # To guard against parsing errors, put the password in quotes.
    enable = false
    station = replace_me
    password = replace_me

[[Wunderground]]
    # This section is for configuring posts to the Weather Underground.

    # If you wish to do this, set the option 'enable' to true,
    # and specify a station (e.g., 'KORHOODR3') and password.
    # To guard against parsing errors, put the password in quotes.
    enable = false
    station = replace_me
    password = replace_me

    # If you plan on using wunderfixer, set the following
    # to your API key:
    api_key = replace_me

    # Set the following to True to have weewx use the WU "Rapidfire"
    # protocol. Not all hardware can support it. See the User's Guide.
    rapidfire = False

##############################################################################

This section specifies what reports, using which skins, to generate.

[StdReport]

# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins

# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = public_html

# The database binding indicates which data should be used in reports.
data_binding = wx_binding

# Whether to log a successful operation
log_success = True

# Whether to log an unsuccessful operation
log_failure = False

# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.

[[SeasonsReport]]
    # The SeasonsReport uses the 'Seasons' skin, which contains the
    # images, templates and plots for the report.
    skin = Seasons
    enable = true

[[SmartphoneReport]]
    # The SmartphoneReport uses the 'Smartphone' skin, and the images and
    # files are placed in a dedicated subdirectory.
    skin = Smartphone
    enable = false
    HTML_ROOT = public_html/smartphone

[[MobileReport]]
    # The MobileReport uses the 'Mobile' skin, and the images and files
    # are placed in a dedicated subdirectory.
    skin = Mobile
    enable = false
    HTML_ROOT = public_html/mobile

[[StandardReport]]
    # This is the old "Standard" skin. By default, it is not enabled.
    skin = Standard
    enable = false

[[FTP]]
    # FTP'ing the results to a webserver is treated as just another report,
    # albeit one with an unusual report generator!
    skin = Ftp

    # If you wish to use FTP, set "enable" to "true", then
    # fill out the next four lines.
    # Use quotes around passwords to guard against parsing errors.
    enable = false
    user = replace_me
    password = replace_me
    server = replace_me    # The ftp server name, e.g, www.myserver.org
    path = replace_me    # The destination directory, e.g., /weather

    # Set to True for an FTP over TLS (FTPS) connection. Not all servers
    # support this.
    secure_ftp = False

    # To upload files from something other than what HTML_ROOT is set
    # to above, specify a different HTML_ROOT here.
    #HTML_ROOT = public_html

    # Most FTP servers use port 21
    port = 21

    # Set to 1 to use passive mode, zero for active mode
    passive = 1

[[RSYNC]]
    # rsync'ing to a webserver is treated as just another report
    skin = Rsync

    # If you wish to use rsync, you must configure passwordless ssh using
    # public/private key authentication from the user account that weewx
    # runs to the user account on the remote machine where the files
    # will be copied.
    #
    # If you wish to use rsync, set "enable" to "true", then
    # fill out server, user, and path.
    # The server should appear in your .ssh/config file.
    # The user is the username used in the identity file.
    # The path is the destination directory, such as /var/www/html/weather.
    # Be sure that the user has write permissions on the destination!
    enable = false
    server = replace_me
    user = replace_me
    path = replace_me

    # To upload files from something other than what HTML_ROOT is set
    # to above, specify a different HTML_ROOT here.
    #HTML_ROOT = public_html

    # Rsync can be configured to remove files from the remote server if
    # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
    # make a mistake in the remote path, you could could unintentionally
    # cause unrelated files to be deleted. Set to 1 to enable remote file
    # deletion, zero to allow files to accumulate remotely.
    delete = 0

####

# Various options for customizing your reports.

[[Defaults]]

    [[[Units]]]

        # The following section sets what unit to use for each unit group.
        # NB: The unit is always in the singular. I.e., 'mile_per_hour',
        # NOT 'miles_per_hour'
        [[[[Groups]]]]

            group_altitude = foot    # Options are 'foot' or 'meter'
            group_degree_day = degree_F_day    # Options are 'degree_F_day' or 'degree_C_day'
            group_distance = mile    # Options are 'mile' or 'km'
            group_pressure = inHg    # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
            group_rain = inch    # Options are 'inch', 'cm', or 'mm'
            group_rainrate = inch_per_hour    # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
            group_speed = mile_per_hour    # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
            group_speed2 = mile_per_hour2    # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
            group_temperature = degree_F    # Options are 'degree_F' or 'degree_C'

        # The following section sets the formatting for each type of unit.
        [[[[StringFormats]]]]

            centibar = %.0f
            cm = %.2f
            cm_per_hour = %.2f
            degree_C = %.1f
            degree_F = %.1f
            degree_compass = %.0f
            foot = %.0f
            hPa = %.1f
            hour = %.1f
            inHg = %.3f
            inch = %.2f
            inch_per_hour = %.2f
            km = %.1f
            km_per_hour = %.0f
            km_per_hour2 = %.1f
            knot = %.0f
            knot2 = %.1f
            mbar = %.1f
            meter = %.0f
            meter_per_second = %.1f
            meter_per_second2 = %.1f
            mile = %.1f
            mile_per_hour = %.0f
            mile_per_hour2 = %.1f
            mm = %.1f
            mmHg = %.1f
            mm_per_hour = %.1f
            percent = %.0f
            second = %.0f
            uv_index = %.1f
            volt = %.1f
            watt_per_meter_squared = %.0f
            NONE = "   N/A"

        # The following section overrides the label used for each type of unit
        [[[[Labels]]]]

            meter = " meter", " meters"    # You may prefer "metre".
            day = " day", " days"
            hour = " hour", " hours"
            minute = " minute", " minutes"
            second = " second", " seconds"
            NONE = ""

        # The following section sets the format for each time scale.
        # The values below will work in every locale, but they may not look
        # particularly attractive.
        [[[[TimeFormats]]]]

            hour = %H:%M
            day = %X
            week = %X (%A)
            month = %x %X
            year = %x %X
            rainyear = %x %X
            current = %x %X
            ephem_day = %X
            ephem_year = %x %X

        [[[[Ordinates]]]]

            # Ordinal directions. The last one is for no wind direction
            directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A

        # The following section sets the base temperatures used for the
        #  calculation of heating, cooling, and growing degree-days.
        [[[[DegreeDays]]]]

            # Base temperature for heating days, with unit:
            heating_base = 65, degree_F
            # Base temperature for cooling days, with unit:
            cooling_base = 65, degree_F
            # Base temperature for growing days, with unit:
            growing_base = 50, degree_F

        # A trend takes a difference across a time period. The following
        # section sets the time period, and how big an error is allowed to
        # still be counted as the start or end of a period.
        [[[[Trend]]]]

            time_delta = 10800    # 3 hours
            time_grace = 300    # 5 minutes

    # The labels to be used for each observation type
    [[[Labels]]]

        # Set to hemisphere abbreviations suitable for your location:
        hemispheres = N, S, E, W

        # Formats to be used for latitude whole degrees, longitude whole
        # degrees, and minutes:
        latlon_formats = %02d, %03d, %05.2f

        # Generic labels, keyed by an observation type.
        [[[[Generic]]]]
            barometer = Barometer
            dewpoint = Dew Point
            ET = ET
            heatindex = Heat Index
            inHumidity = Inside Humidity
            inTemp = Inside Temperature
            outHumidity = Humidity
            outTemp = Outside Temperature
            radiation = Radiation
            rain = Rain
            rainRate = Rain Rate
            UV = UV Index
            windDir = Wind Direction
            windGust = Gust Speed
            windGustDir = Gust Direction
            windSpeed = Wind Speed
            windchill = Wind Chill
            windgustvec = Gust Vector
            windvec = Wind Vector
            extraTemp1 = Temperature1
            extraTemp2 = Temperature2
            extraTemp3 = Temperature3

            # Sensor status indicators

            rxCheckPercent = Signal Quality
            txBatteryStatus = Transmitter Battery
            windBatteryStatus = Wind Battery
            rainBatteryStatus = Rain Battery
            outTempBatteryStatus = Outside Temperature Battery
            inTempBatteryStatus = Inside Temperature Battery
            consBatteryVoltage = Console Battery
            heatingVoltage = Heating Battery
            supplyVoltage = Supply Voltage
            referenceVoltage = Reference Voltage

    [[[Almanac]]]

        # The labels to be used for the phases of the moon:
        moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent

##############################################################################

This service acts as a filter, converting the unit system coming from

the hardware to a unit system in the database.

[StdConvert]

# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.

# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US    # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

This section can adjust data using calibration expressions.

[StdCalibrate]

[[Corrections]]
    # For each type, an arbitrary calibration expression can be given.
    # It should be in the units defined in the StdConvert section.
    # Example:
    foo = foo + 0.2

##############################################################################

This section is for quality control checks. If units are not specified,

values must be in the units defined in the StdConvert section.

[StdQC]

[[MinMax]]
    barometer = 26, 32.5, inHg
    pressure = 24, 34.5, inHg
    outTemp = -40, 120, degree_F
    inTemp = 10, 120, degree_F
    outHumidity = 0, 100
    inHumidity = 0, 100
    windSpeed = 0, 120, mile_per_hour
    rain = 0, 10, inch

##############################################################################

This section controls the origin of derived values.

[StdWXCalculate]

[[Calculations]]
    # How to calculate derived quantities.  Possible values are:
    #  hardware        - use the value provided by hardware
    #  software        - use the value calculated by weewx
    #  prefer_hardware - use value provide by hardware if available,
    #                      otherwise use value calculated by weewx

    pressure = prefer_hardware
    altimeter = prefer_hardware
    appTemp = prefer_hardware
    barometer = prefer_hardware
    beaufort = prefer_hardware
    cloudbase = prefer_hardware
    dewpoint = prefer_hardware
    ET = prefer_hardware
    heatindex = prefer_hardware
    humidex = prefer_hardware
    inDewpoint = prefer_hardware
    maxSolarRad = prefer_hardware
    rainRate = prefer_hardware
    windchill = prefer_hardware
    windrun = prefer_hardware

##############################################################################

For hardware that supports it, this section controls how often the

onboard clock gets updated.

[StdTimeSynch]

# How often to check the weather station clock for drift (in seconds)
clock_check = 14400

# How much it can drift before we will correct it (in seconds)
max_drift = 5

##############################################################################

This section is for configuring the archive service.

[StdArchive]

# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300

# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware

# Whether to include LOOP data in hi/low statistics
loop_hilo = True

# The data binding used to save archive records
data_binding = wx_binding

##############################################################################

This section binds a data store to a database.

[DataBindings]

[[wx_binding]]
    # The database must match one of the sections in [Databases].
    # This is likely to be the only option you would want to change.
    database = archive_sqlite
    # The name of the table within the database
    table_name = archive
    # The manager handles aggregation of data for historical summaries
    manager = weewx.manager.DaySummaryManager
    # The schema defines the structure of the database.
    # It is *only* used when the database is created.
    schema = schemas.wview_extended.schema

##############################################################################

This section defines various databases.

[Databases]

# A SQLite database is simply a single file
[[archive_sqlite]]
    database_name = weewx.sdb
    database_type = SQLite

# MySQL
[[archive_mysql]]
    database_name = weewx
    database_type = MySQL

##############################################################################

This section defines defaults for the different types of databases.

[DatabaseTypes]

# Defaults for SQLite databases
[[SQLite]]
    driver = weedb.sqlite
    # Directory in which the database files are located
    SQLITE_ROOT = %(WEEWX_ROOT)s/archive

# Defaults for MySQL databases
[[MySQL]]
    driver = weedb.mysql
    # The host where the database is located
    host = localhost
    # The user name for logging in to the host
    user = weewx
    # The password for the user name (quotes guard against parsing errors)
    password = weewx

##############################################################################

This section configures the internal weewx engine.

[Engine]

[[Services]]
    # This section specifies the services that should be run. They are
    # grouped by type, and the order of services within each group
    # determines the order in which the services will be run.
    prep_services = weewx.engine.StdTimeSynch
    data_services = ,
    process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
    archive_services = weewx.engine.StdArchive
    restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
    report_services = weewx.engine.StdPrint, weewx.engine.StdReport
ispybadguys commented 4 years ago

I think I am starting to understand this. I did not realize that I need to edit the script weewx/bin/user/weatherflowudp.py because the sensor_map code is commented out. I removed the lines between ''' and ''' now have: `#!/usr/bin/env python

Copyright 2017-2020 Arthur Emerson, vreihen@yahoo.com

Distributed under the terms of the GNU Public License (GPLv3)

[WeatherFlowUDP] driver = user.weatherflowudp log_raw_packets = True udp_address =

udp_address = 0.0.0.0

# udp_address = 255.255.255.255
udp_port = 50222
udp_timeout = 90
share_socket = True

# This section is for the TEMPEST WeatherFlow Bridge packets, via UDP broadcast on local subnet

[[sensor_map]]
    outTemp = air_temperature.ST-00000025.obs_st
    outHumidity = relative_humidity.ST-00000025.obs_st
    pressure = station_pressure.ST-00000025.obs_st
    #lightning_strikes =  lightning_strike_count.ST-00000025.obs_st
    #avg_distance =  lightning_strike_avg_distance.ST-00000025.obs_st
    outTempBatteryStatus = battery.ST-00000025.obs_st
    windSpeed = wind_speed.ST-00000025.rapid_wind
    windDir = wind_direction.ST-00000025.rapid_wind
    #luxXXX = illuminance.ST-00000025.obs_st
    UV = uv.ST-00000025.obs_st
    rain = rain_accumulated.ST-00000025.obs_st
    windBatteryStatus = battery.ST-00000025.obs_st
    radiation = solar_radiation.ST-00000025.obs_st
    #lightningXXX = distance.ST-00000025.evt_strike
    #lightningYYY = energy.ST-00000025.evt_strike

from future import with_statement`

I am getting the error : Traceback (most recent call last): File "/home/weewx/bin/weewxd", line 261, in main() File "/home/weewx/bin/weewxd", line 148, in main engine = weewx.engine.StdEngine(config_dict) File "/home/weewx/bin/weewx/engine.py", line 69, in init self.setupStation(config_dict) File "/home/weewx/bin/weewx/engine.py", line 92, in setupStation import(driver) File "/home/weewx/bin/user/weatherflowudp.py", line 7 driver = user.weatherflowudp ^ IndentationError: unexpected indent

Do you have an example of the correct indentation. I am not a Python guy.

Thanks

Kurt

ispybadguys commented 4 years ago

Any idea why I am getting this error

sudo /home/weewx/bin/weewxd /home/weewx/weewx.conf Traceback (most recent call last): File "/home/weewx/bin/weewxd", line 261, in main() File "/home/weewx/bin/weewxd", line 148, in main engine = weewx.engine.StdEngine(config_dict) File "/home/weewx/bin/weewx/engine.py", line 69, in init self.setupStation(config_dict) File "/home/weewx/bin/weewx/engine.py", line 92, in setupStation import(driver) File "/home/weewx/bin/user/weatherflowudp.py", line 10 udp_address = 0.0.0.0 ^ SyntaxError: invalid syntax