works only with 1 network

[GoogleCodeExporter]

I use backtrack 5r1 installed on my laptop with alfa awus036h(usb).
I'm in good neighborhood and my 9dBi antenna shows about 40networks.
About 20 of them are near and signal is from -40 to -70.
I successfully received password to the nearest one and the farest one(still 
working). I can't even start any other network. I have errors like all others:
timeout occurred or
can't get authentication or
retrying one pin (eternity).
So what is wrong?
I think there is something wrong with reaver.

Original issue reported on code.google.com by piotrchm...@poczta.fm on 27 Feb 2012 at 9:01

[GoogleCodeExporter]

if you can't get auth:

Console #1
aireplay-ng wlan0 -1 120 -a BSSID

Console #2
reaver -i INTERFACE -b BSSID -c CHANNEL -A

Try this one regarding that one pin (along with aireplay-ng in other console)

reaver -i INTERFACE -b BSSID -c CHANNEL -A -S -w -vv -N
(if you manage to crack it using -N though, and doesn't work without it, I 
don't think you'll get wpa password)

Original comment by xFxIxC...@gmail.com on 29 Feb 2012 at 3:58

[GoogleCodeExporter]

what about when I try some network that works with problems but it goes. But 
the speed is... like this: its starts with 2-3sec/pin and after an hour is 
13sec/pin and after 12h id 30sec/pin, after a day is 40sec/pin....

When I stop it it sometimes speed up after resuming.

Original comment by piotrchm...@poczta.fm on 29 Feb 2012 at 9:02

[GoogleCodeExporter]

Maybe there is some AP WPS lockout that blocks reaver from trying new pins ?

use the -vv switch to see if there is such message

Original comment by xFxIxC...@gmail.com on 1 Mar 2012 at 2:37

[GoogleCodeExporter]

timeout and retrying pins, nothing else...

Original comment by piotrchm...@poczta.fm on 1 Mar 2012 at 8:49

[GoogleCodeExporter]

i have simular problem i cracked so far 3 networks i m getting more than 100 
networks with good signal but when i try with wash on most of them its say wps 
lock NO i start reaver and is going checking one pin all time any idea ?

Original comment by cif...@gmail.com on 5 Mar 2012 at 9:32

[GoogleCodeExporter]

Comment 1: it does not.

Original comment by demon.ia...@hotmail.com on 6 Apr 2012 at 3:22

[GoogleCodeExporter]

pleas help me im already have the pin of my wifi neighbour but when i try 
reaver it block in trying pin

Original comment by zedmi...@gmail.com on 1 Sep 2014 at 11:19