WiFi won't connect to Clear router

[GoogleCodeExporter]

What steps will reproduce the problem?
1. wipe data and install ROM and Gapps
2. Select Clear router and type in password
3. Says connecting then goes back to saved, secured with WPA 2

What is the expected output? What do you see instead?
On sense, I am able to connect to my Clear router at home without any issues.

What version of the product are you using? On what operating system?
nightly 20120904

Please provide any additional information below.
Router and Internet provider: http://www.clear.com/devices/details/id/devwifi

Online it says that it uses a 2.5 GHz WiMax connection

Original issue reported on code.google.com by MattMo...@gmail.com on 5 Sep 2012 at 12:03

[GoogleCodeExporter]

Same problem here with Clear hub express and my OneX.

Original comment by itaintr...@gmail.com on 10 Sep 2012 at 7:02

[GoogleCodeExporter]

[deleted comment]

[GoogleCodeExporter]

I noticed the same behavior when using an LTE MiFi hotspot - I know seems 
counterintuitive to connect to an LTE hotspot with an LTE phone But it was done 
for a reason.  I got the Grey WiFi bars, and the status said "Connected" but it 
never did anything.  I couldn't ping through to Amy known boxes on the 
network...

Original comment by zachary....@gmail.com on 2 Oct 2012 at 4:18

[GoogleCodeExporter]

We are building with much newer firmware starting with 10/05 nightly. Please 
give it a shot and report back!

Original comment by h8r...@gmail.com on 6 Oct 2012 at 12:35

[GoogleCodeExporter]

This problem persist for 10/6 nightly on a Clear Hub modem. Samsung Captivate 
running CM9 (as well as 3 computers on Win8 and Win7) has no problems 
connecting to WPA2. Also tried connecting via WPS which failed as well.

Original comment by whitlock...@gmail.com on 6 Oct 2012 at 6:49

[GoogleCodeExporter]

yeah, also a no go on both the 10/5 and the 10/6 nightlies. still tries to 
connect then hangs at the saved dialog

Original comment by MattMo...@gmail.com on 7 Oct 2012 at 4:03

[GoogleCodeExporter]

Not sure if it's related, but I'm seeing WiFi not disconnecting after driving 
away from the AP.
I've seen this behavior at work with a NetGear Router, at home with a D-Link 
DIR-655, at parent's AT&T U-Verse 2-Wire and at sister's D-Link WRT-54G.
Since it doesn't disconnect and it thinks it's within WiFi Range, no data 
connection is available until the next AP is available.

Original comment by rodl...@gmail.com on 10 Oct 2012 at 2:11

[GoogleCodeExporter]

BTW, I'm running CM10 Nightlies 10/6 on AT&T HOX

Original comment by rodl...@gmail.com on 10 Oct 2012 at 2:12

[GoogleCodeExporter]

Running 10/10 and something has changed. Before it would go to saved instantly. 
But with 10/10, I can see it trying to connect for a few seconds before going 
to saved. 

Original comment by itaintr...@gmail.com on 10 Oct 2012 at 6:06

[GoogleCodeExporter]

itaintrite: can you swing a logcat on one of the newer nightlies since we did 
the wifi updates? Hoping to find some goodies in there to straighten this out 
for you guys :(. Please try with 10/12 nightly or later and snag me a logcat if 
you wouldn't mind!

Original comment by h8r...@gmail.com on 12 Oct 2012 at 3:53

[GoogleCodeExporter]

Here you go. Running 10/12. 

Original comment by itaintr...@gmail.com on 12 Oct 2012 at 3:54

Attachments:

• logcat.txt

[GoogleCodeExporter]

Update: On 11/3 Nightly, this problem persists. Not sure if it matters but I 
did cache and dalvik wipe with update from 10/12, not a complete system wipe. 
Thanks.

Original comment by whitlock...@gmail.com on 3 Nov 2012 at 8:44

[GoogleCodeExporter]

Original comment by h8r...@gmail.com on 25 Dec 2012 at 12:51

• Added labels: Milestone-CM10

[GoogleCodeExporter]

Update: Tried on CM 10.1 nightly 20121225 and still was not able to connect to 
the Clear modem.
Switched back to recently updated stock JB 4.1 and was able to connect without 
difficult. Thanks.

Original comment by whitlock...@gmail.com on 30 Dec 2012 at 4:12

[GoogleCodeExporter]

Can I get a logcat of this not working on CM, and a logcat of it working on JB 
Sense?

Original comment by h8r...@gmail.com on 2 Jan 2013 at 6:02

[GoogleCodeExporter]

Original comment by h8r...@gmail.com on 4 Feb 2013 at 8:07

• Added labels: Function-Wireless

[GoogleCodeExporter]

Original comment by h8r...@gmail.com on 8 Feb 2013 at 3:52

• Changed state: Done