Open tolgaoz132 opened 3 years ago
carlosedubarreto
commented
3 years ago Thirst thing I notice is that you are having multiple error with GIT.
run the command explained here https://github.com/carlosedubarreto/frankmocap_win_install#install-pytorch-and-torchvision
wich is:
conda install -c anaconda git
and run the installation again.
PS.:run it inside frankmoca enviroment (after running this commnad conda activate frankmocap )
tolgaoz132
commented
3 years ago well, yes i skipped this install GIT step because it didn't exist in the video.. So i had ignored it.. sorry for bothering. But i closed the anaconda prompt yesterday, Today, i've opened the anaconda prompt, and started writing all commands from scratch. And it says that;
(base) C:\Users\Tolga>cd/
(base) C:>cd MOCAP
(base) C:\MOCAP>cd frankmocap
(base) C:\MOCAP\frankmocap>conda create -n frankmocap python=3.7 WARNING: A conda environment already exists at 'C:\Users\Tolga\miniconda3\envs\frankmocap' Remove existing environment (y/[n])?
besides i don't know how to run it inside frankmoca environment. I don't know well this kind of things,, i'm sorry. but İf you think i messed up something inextricably, i wouldn't like to waste of your time either.
carlosedubarreto
commented
3 years ago LOL, no problem.... I only noticed that was missing that git command after I did the video.
If I get a chance to record the video again I'll add it for sure LOL.
About now that you came back...
To use frankmocap you must open anaconda and type:
conda activate frankmocap
This will enable the virtual enviroment created for frankmocap.
Than you run that git command
conda install -c anaconda git
and run the install bat again.
Dont worry about bothering. I like to help. Sometimes I take too long because I have too much things to do that are late 😅
tolgaoz132
commented
3 years ago OKAY, thank you again, You can reply anytime, I'm not in a hurry though. you can reply whenever you want. And well, i typed these two command in the anaconda. And It worked well . But what do you mean with the '' run install bat again''. i don't want to make another mistake so asking. Should i open the anaconda and type all commands from scratch or just type execution test? I mean this; execution test python -m demo.demo_frankmocap --input_path ./sampledata/single_totalbody.mp4 --out_dir ./mocap_output --save_pred_pkl
carlosedubarreto
commented
3 years ago It would be to execute the script that does the instalation.
Step by step would be to put these commands in you anaconda CMD
1- conda activate frankmocap
2- conda install -c anaconda git (if you didnt already, but I think you did. But doing this again wont cause you problem)
3- "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars64.bat"
4- install_win_full_body.bat
tolgaoz132
commented
3 years ago hi friend, i tried these steps just now. it seems the last step is problematic only for this time. this is what i get.
(base) C:\Users\Tolga>conda activate frankmocap
(frankmocap) C:\Users\Tolga>conda install -c anaconda git Collecting package metadata (current_repodata.json): done Solving environment: done
==> WARNING: A newer version of conda exists. <== current version: 4.9.2 latest version: 4.10.1
Please update conda by running
$ conda update -n base -c defaults conda(frankmocap) C:\Users\Tolga>"C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars64.bat"
Visual Studio 2017 Developer Command Prompt v15.9.36 Copyright (c) 2017 Microsoft Corporation
[vcvarsall.bat] Environment initialized for: 'x64'
(frankmocap) C:\Users\Tolga>install_win_full_body.bat 'install_win_full_body.bat' is not recognized as an internal or external command, operable program or batch file.
(frankmocap) C:\Users\Tolga>
(frankmocap) C:\Users\Tolga>install_win_full_body.bat 'install_win_full_body.bat' is not recognized as an internal or external command, operable program or batch file.
(frankmocap) C:\Users\Tolga>
carlosedubarreto
commented
3 years ago You have to go inside the folder that you unzipped the frankmocap files.
seems to be this one (i took from the first message you sent)
tolgaoz132
commented
3 years ago thank you, it started downloading .something new in anaconda. And i saw in the folder some videos downloaded just like your youtube video. An asian boy exists :) but what now, how can i run the program? i typed execution test in anaconda and i took this result, or should i make something different?
(frankmocap) C:\MOCAP\frankmocap>python -m demo.demo_frankmocap --input_path ./sampledata/single_totalbody.mp4 --out_dir ./mocap_output --save_pred_pkl
Traceback (most recent call last):
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\runpy.py", line 193, in _run_module_as_main
"main", mod_spec)
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\runpy.py", line 85, in _run_code
exec(code, run_globals)
File "C:\MOCAP\frankmocap\demo\demo_frankmocap.py", line 16, in
(frankmocap) C:\MOCAP\frankmocap>
carlosedubarreto
commented
3 years ago I need to see the installation logs after you run that git install command.
Please follow these steps and send the result here.
https://github.com/carlosedubarreto/frankmocap_win_install/issues/22#issuecomment-860263763
But do it inside this folder C:\MOCAP\frankmocap
tolgaoz132
commented
3 years ago okay, i typed these three commands first again. And i'm copyin and pasting the results of installation log. I'll copy the results of step 4 later on. Because for the last step, the installation log become quite long. And it doesn't fit to comment section.(Github allows up to 67000 character at most). And i'm not even sure if this is the you want me to make. Honestly, i don't have much more idea about what i'm doing about :)...
Or, perhabs... Wouldn't it be healthier if you say to me how to uninstall everything clearly? Maybe it would be better, if i uninstall evertything and start installing everything from scratch. Whatever, here is the result after i run the commands for 1,2 and 3. I'll try to copy and paste the results of 4. step at other comments;
(base) C:\Users\Tolga>cd/
(base) C:>cd MOCAP
(base) C:\MOCAP>cd frankmocap
(base) C:\MOCAP\frankmocap>conda activate frankmocap
(frankmocap) C:\MOCAP\frankmocap>conda install -c anaconda git Collecting package metadata (current_repodata.json): done Solving environment: done
==> WARNING: A newer version of conda exists. <== current version: 4.9.2 latest version: 4.10.1
Please update conda by running
$ conda update -n base -c defaults conda(frankmocap) C:\MOCAP\frankmocap>"C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars64.bat"
Visual Studio 2017 Developer Command Prompt v15.9.36 Copyright (c) 2017 Microsoft Corporation
[vcvarsall.bat] Environment initialized for: 'x64'
(frankmocap) C:\MOCAP\frankmocap>
tolgaoz132
commented
3 years ago i am supposed to copy and paste the installation log into wordpad. Because trying to copy and paste to here didn't worked again. I uploaded it mediafire. I hope this is okay. https://www.mediafire.com/file/f9rqz6zcaydpcs7/anaconda_log.rar/file
carlosedubarreto
commented
3 years ago can you post the file here? just drag to the comment.
I cant download from that site, it gives me the error below
tolgaoz132
commented
3 years ago oh okay. I didn' realised that i can attach the files to here.:) Here it is. anaconda_log.zip
carlosedubarreto
commented
3 years ago interesting, I didnt find error.
What is most problematic, that is the hand_detector, seemed that it worked fine...
Please activate de frankmocap enviroment : conda activate frankmocap
and run these 2 codes
conda install cudatoolkit=10.1 cudnn=7.6.0
conda install -c pytorch pytorch==1.6.0 torchvision cudatoolkit=10.1
carlosedubarreto
commented
3 years ago also run this command please
pip install torchgeometry
then try running frankmocap again
tolgaoz132
commented
3 years ago whoah, something happened. I made these things which are you say. And then i typed execution test. And this program opened with this video that asian boy exists.. I think we succeeded it work out finally.:) But the video is so slowing. Probably because of it is computing the video action. But any menu didn't come up. How we can export the action in fbx or bvh format? Or when we want to upload our custom video, how we do that? By the way, it closed itself just now. I guess because of it finished it's process.
Any way, in case of you wonder, I'm copy and pasting the log. And thank you by the way, this is so wonderful :)
(base) C:\Users\Tolga>cd/
(base) C:>cd MOCAP
(base) C:\MOCAP>cd frankmocap
(base) C:\MOCAP\frankmocap>conda activate frankmocap
(frankmocap) C:\MOCAP\frankmocap>conda install cudatoolkit=10.1 cudnn=7.6.0 Collecting package metadata (current_repodata.json): done Solving environment: done
==> WARNING: A newer version of conda exists. <== current version: 4.9.2 latest version: 4.10.1
Please update conda by running
$ conda update -n base -c defaults condaenvironment location: C:\Users\Tolga\miniconda3\envs\frankmocap
added / updated specs:
The following packages will be UPDATED:
ca-certificates anaconda::ca-certificates-2020.10.14-0 --> pkgs/main::ca-certificates-2021.5.25-haa95532_1 certifi anaconda::certifi-2020.6.20-py37_0 --> pkgs/main::certifi-2021.5.30-py37haa95532_0
Proceed ([y]/n)? y
Preparing transaction: done Verifying transaction: done Executing transaction: done
(frankmocap) C:\MOCAP\frankmocap>conda install -c pytorch pytorch==1.6.0 torchvision cudatoolkit=10.1 Collecting package metadata (current_repodata.json): done Solving environment: done
==> WARNING: A newer version of conda exists. <== current version: 4.9.2 latest version: 4.10.1
Please update conda by running
$ conda update -n base -c defaults conda(frankmocap) C:\MOCAP\frankmocap>pip install torchgeometry Collecting torchgeometry Downloading torchgeometry-0.1.2-py2.py3-none-any.whl (42 kB) |████████████████████████████████| 42 kB 1.1 MB/s Requirement already satisfied: torch>=1.0.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from torchgeometry) (1.6.0) Requirement already satisfied: future in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from torch>=1.0.0->torchgeometry) (0.18.2) Requirement already satisfied: numpy in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from torch>=1.0.0->torchgeometry) (1.20.2) Installing collected packages: torchgeometry Successfully installed torchgeometry-0.1.2 WARNING: You are using pip version 20.3.3; however, version 21.1.2 is available. You should consider upgrading via the 'C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe -m pip install --upgrade pip' command.
Visualization saved: ./mocap_output\rendered\00616.jpg Prediction saved: ./mocap_output\mocap\00616_prediction_result.pkl Processed : ./mocap_output\frames\00616.jpg
Generating video in ./mocap_output\single_totalbody.mp4 'ffmpeg' is not recognized as an internal or external command, operable program or batch file.
(frankmocap) C:\MOCAP\frankmocap>
carlosedubarreto
commented
3 years ago Comgratulations. it worked.
The easiest way to get the movement data is using blender mocap_import addon
https://gumroad.com/l/mocap_import
there is a option to import frankmocap data, and it converts to skeleton and you can export to use somewhere else in fbx or bvh.
carlosedubarreto
commented
3 years ago here is an example of an olde version, importing frankmocap data
https://user-images.githubusercontent.com/4061130/122291904-c395f600-cecb-11eb-88b0-360f7f4d79dd.mp4
Chopin68
commented
2 years ago I encountered a problem while running the test：ModuleNotFoundError: No module named 'detectors'
carlosedubarreto
commented
2 years ago you must see the full log that shows on the screen, some problem must appear in there, that can explain this error. Sen the full log here, I can try to show you where the problem might be.
Chopin68
commented
2 years ago 您必须看到屏幕上显示的完整日志，其中必须出现一些问题，这可以解释此错误。 在这里发送完整的日志，我可以尝试向您展示问题可能出在哪里。
(frankmocap) Z:\GO\frankmocap\frankmocap-main>python -m demo.demo_frankmocap --input_path ./sampledata/single_totalbody.mp4 --out_dir ./mocap_output --save_pred_pkl
Traceback (most recent call last):
File "K:\Program Files\ai\envs\frankmocap\lib\runpy.py", line 193, in _run_module_as_main
"main", mod_spec)
File "K:\Program Files\ai\envs\frankmocap\lib\runpy.py", line 85, in _run_code
exec(code, run_globals)
File "Z:\GO\frankmocap\frankmocap-main\demo\demo_frankmocap.py", line 23, in
carlosedubarreto
commented
2 years ago I mean to show the log of the installation. To see what was the package with problem.
But I must be clear, maybe I wont be able to help much because I dont use frankmocap anymore, so I probably wont know what you would need to do.
I'm offering to show you where is the real problem, but it is most probable that I wont be able to show you how to fix.
Chopin68
commented
2 years ago I think I know why，my visual studio 2019，What is needed is this version 2017
我的意思是显示安装日志。看看是什么包有问题。
但我必须清楚，也许我无法提供太多帮助，因为我不再使用 frankmocap，所以我可能不知道你需要做什么。
我愿意向您展示真正的问题在哪里，但很可能我无法向您展示如何解决。
(base) C:\Users\Tolga>cd/
(base) C:>cd MOCAP
(base) C:\MOCAP>cd frankmocap
(base) C:\MOCAP\frankmocap>conda create -n frankmocap python=3.7 Collecting package metadata (current_repodata.json): done Solving environment: done
==> WARNING: A newer version of conda exists. <== current version: 4.9.2 latest version: 4.10.1
Please update conda by running
Package Plan
environment location: C:\Users\Tolga\miniconda3\envs\frankmocap
added / updated specs:
The following packages will be downloaded:
The following NEW packages will be INSTALLED:
ca-certificates pkgs/main/win-64::ca-certificates-2021.5.25-haa95532_1 certifi pkgs/main/win-64::certifi-2021.5.30-py37haa95532_0 openssl pkgs/main/win-64::openssl-1.1.1k-h2bbff1b_0 pip pkgs/main/win-64::pip-21.1.2-py37haa95532_0 python pkgs/main/win-64::python-3.7.10-h6244533_0 setuptools pkgs/main/win-64::setuptools-52.0.0-py37haa95532_0 sqlite pkgs/main/win-64::sqlite-3.35.4-h2bbff1b_0 vc pkgs/main/win-64::vc-14.2-h21ff451_1 vs2015_runtime pkgs/main/win-64::vs2015_runtime-14.27.29016-h5e58377_2 wheel pkgs/main/noarch::wheel-0.36.2-pyhd3eb1b0_0 wincertstore pkgs/main/win-64::wincertstore-0.2-py37_0
Proceed ([y]/n)? y
Downloading and Extracting Packages sqlite-3.35.4 | 761 KB | ############################################################################ | 100% wheel-0.36.2 | 33 KB | ############################################################################ | 100% ca-certificates-2021 | 112 KB | ############################################################################ | 100% python-3.7.10 | 14.5 MB | ############################################################################ | 100% certifi-2021.5.30 | 139 KB | ############################################################################ | 100% openssl-1.1.1k | 4.8 MB | ############################################################################ | 100% wincertstore-0.2 | 14 KB | ############################################################################ | 100% setuptools-52.0.0 | 711 KB | ############################################################################ | 100% pip-21.1.2 | 1.8 MB | ############################################################################ | 100% Preparing transaction: done Verifying transaction: done Executing transaction: done #
To activate this environment, use
#
$ conda activate frankmocap
#
To deactivate an active environment, use
#
$ conda deactivate
(base) C:\MOCAP\frankmocap>conda activate frankmocap
(frankmocap) C:\MOCAP\frankmocap>conda install cudatoolkit=10.1 cudnn=7.6.0 Collecting package metadata (current_repodata.json): done Solving environment: failed with initial frozen solve. Retrying with flexible solve. Collecting package metadata (repodata.json): done Solving environment: done
==> WARNING: A newer version of conda exists. <== current version: 4.9.2 latest version: 4.10.1
Please update conda by running
Package Plan
environment location: C:\Users\Tolga\miniconda3\envs\frankmocap
added / updated specs:
The following packages will be downloaded:
The following NEW packages will be INSTALLED:
cudatoolkit pkgs/main/win-64::cudatoolkit-10.1.243-h74a9793_0 cudnn pkgs/main/win-64::cudnn-7.6.0-cuda10.1_0
Proceed ([y]/n)? y
Downloading and Extracting Packages cudatoolkit-10.1.243 | 300.3 MB | ############################################################################ | 100% cudnn-7.6.0 | 173.4 MB | ############################################################################ | 100% Preparing transaction: done Verifying transaction: done Executing transaction: done
(frankmocap) C:\MOCAP\frankmocap>conda install -c pytorch pytorch==1.6.0 torchvision cudatoolkit=10.1 Collecting package metadata (current_repodata.json): done Solving environment: done
==> WARNING: A newer version of conda exists. <== current version: 4.9.2 latest version: 4.10.1
Please update conda by running
Package Plan
environment location: C:\Users\Tolga\miniconda3\envs\frankmocap
added / updated specs:
The following packages will be downloaded:
The following NEW packages will be INSTALLED:
blas pkgs/main/win-64::blas-1.0-mkl freetype pkgs/main/win-64::freetype-2.10.4-hd328e21_0 intel-openmp pkgs/main/win-64::intel-openmp-2021.2.0-haa95532_616 jpeg pkgs/main/win-64::jpeg-9b-hb83a4c4_2 libpng pkgs/main/win-64::libpng-1.6.37-h2a8f88b_0 libtiff pkgs/main/win-64::libtiff-4.2.0-hd0e1b90_0 lz4-c pkgs/main/win-64::lz4-c-1.9.3-h2bbff1b_0 mkl pkgs/main/win-64::mkl-2021.2.0-haa95532_296 mkl-service pkgs/main/win-64::mkl-service-2.3.0-py37h2bbff1b_1 mkl_fft pkgs/main/win-64::mkl_fft-1.3.0-py37h277e83a_2 mkl_random pkgs/main/win-64::mkl_random-1.2.1-py37hf11a4ad_2 ninja pkgs/main/win-64::ninja-1.10.2-h6d14046_1 numpy pkgs/main/win-64::numpy-1.20.2-py37ha4e8547_0 numpy-base pkgs/main/win-64::numpy-base-1.20.2-py37hc2deb75_0 olefile pkgs/main/win-64::olefile-0.46-py37_0 pillow pkgs/main/win-64::pillow-8.2.0-py37h4fa10fc_0 pytorch pytorch/win-64::pytorch-1.6.0-py3.7_cuda101_cudnn7_0 six pkgs/main/win-64::six-1.15.0-py37haa95532_0 tk pkgs/main/win-64::tk-8.6.10-he774522_0 torchvision pytorch/win-64::torchvision-0.7.0-py37_cu101 xz pkgs/main/win-64::xz-5.2.5-h62dcd97_0 zlib pkgs/main/win-64::zlib-1.2.11-h62dcd97_4 zstd pkgs/main/win-64::zstd-1.4.9-h19a0ad4_0
Proceed ([y]/n)? y
Downloading and Extracting Packages jpeg-9b | 245 KB | ############################################################################ | 100% zstd-1.4.9 | 478 KB | ############################################################################ | 100% torchvision-0.7.0 | 6.3 MB | ############################################################################ | 100% mkl-2021.2.0 | 115.5 MB | ############################################################################ | 100% six-1.15.0 | 51 KB | ############################################################################ | 100% olefile-0.46 | 49 KB | ############################################################################ | 100% pillow-8.2.0 | 665 KB | ############################################################################ | 100% libtiff-4.2.0 | 786 KB | ############################################################################ | 100% blas-1.0 | 6 KB | ############################################################################ | 100% pytorch-1.6.0 | 683.7 MB | ############################################################################ | 100% tk-8.6.10 | 2.7 MB | ############################################################################ | 100% libpng-1.6.37 | 333 KB | ############################################################################ | 100% ninja-1.10.2 | 250 KB | ############################################################################ | 100% mkl_random-1.2.1 | 214 KB | ############################################################################ | 100% intel-openmp-2021.2. | 1.8 MB | ############################################################################ | 100% xz-5.2.5 | 244 KB | ############################################################################ | 100% numpy-1.20.2 | 23 KB | ############################################################################ | 100% lz4-c-1.9.3 | 131 KB | ############################################################################ | 100% mkl_fft-1.3.0 | 133 KB | ############################################################################ | 100% numpy-base-1.20.2 | 4.1 MB | ############################################################################ | 100% freetype-2.10.4 | 466 KB | ############################################################################ | 100% mkl-service-2.3.0 | 48 KB | ############################################################################ | 100% Preparing transaction: done Verifying transaction: done Executing transaction: done
(frankmocap) C:\MOCAP\frankmocap>"C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars64.bat"
Visual Studio 2017 Developer Command Prompt v15.9.36 Copyright (c) 2017 Microsoft Corporation
[vcvarsall.bat] Environment initialized for: 'x64'
(frankmocap) C:\MOCAP\frankmocap>install_win_full_body.bat
(frankmocap) C:\MOCAP\frankmocap>rem ####### installing files pre packed
(frankmocap) C:\MOCAP\frankmocap>REM pip install whl/faster_rcnn-0.1-cp37-cp37m-win_amd64.whl
(frankmocap) C:\MOCAP\frankmocap>pip install whl/detectron2-0.3-cp37-cp37m-win_amd64.whl Processing c:\mocap\frankmocap\whl\detectron2-0.3-cp37-cp37m-win_amd64.whl Collecting fvcore>=0.1.2 Downloading fvcore-0.1.5.post20210609.tar.gz (49 kB) |████████████████████████████████| 49 kB 1.0 MB/s Requirement already satisfied: numpy in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from fvcore>=0.1.2->detectron2==0.3) (1.20.2) Collecting iopath>=0.1.7 Downloading iopath-0.1.8-py3-none-any.whl (19 kB) Collecting Pillow>=7.1 Downloading Pillow-8.2.0-cp37-cp37m-win_amd64.whl (2.2 MB) |████████████████████████████████| 2.2 MB 595 kB/s Collecting pycocotools>=2.0.2 Downloading pycocotools-2.0.2.tar.gz (23 kB) Requirement already satisfied: setuptools>=18.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from pycocotools>=2.0.2->detectron2==0.3) (52.0.0.post20210125) Collecting cython>=0.27.3 Using cached Cython-0.29.23-cp37-cp37m-win_amd64.whl (1.6 MB) Collecting matplotlib Downloading matplotlib-3.4.2-cp37-cp37m-win_amd64.whl (7.1 MB) |████████████████████████████████| 7.1 MB 1.6 MB/s Collecting cycler>=0.10 Downloading cycler-0.10.0-py2.py3-none-any.whl (6.5 kB) Requirement already satisfied: six in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from cycler>=0.10->matplotlib->detectron2==0.3) (1.15.0) Collecting kiwisolver>=1.0.1 Downloading kiwisolver-1.3.1-cp37-cp37m-win_amd64.whl (51 kB) |████████████████████████████████| 51 kB 2.0 MB/s Collecting pyparsing>=2.2.1 Downloading pyparsing-2.4.7-py2.py3-none-any.whl (67 kB) |████████████████████████████████| 67 kB 2.2 MB/s Collecting python-dateutil>=2.7 Downloading python_dateutil-2.8.1-py2.py3-none-any.whl (227 kB) |████████████████████████████████| 227 kB 1.6 MB/s Collecting pyyaml>=5.1 Downloading PyYAML-5.4.1-cp37-cp37m-win_amd64.whl (210 kB) |████████████████████████████████| 210 kB 1.3 MB/s Collecting termcolor>=1.1 Downloading termcolor-1.1.0.tar.gz (3.9 kB) Collecting tqdm>4.29.0 Downloading tqdm-4.61.1-py2.py3-none-any.whl (75 kB) |████████████████████████████████| 75 kB 975 kB/s Collecting yacs>=0.1.6 Downloading yacs-0.1.8-py3-none-any.whl (14 kB) Collecting cloudpickle Downloading cloudpickle-1.6.0-py3-none-any.whl (23 kB) Collecting future Downloading future-0.18.2.tar.gz (829 kB) |████████████████████████████████| 829 kB 1.1 MB/s Collecting portalocker Downloading portalocker-2.3.0-py2.py3-none-any.whl (15 kB) Collecting pywin32!=226 Downloading pywin32-301-cp37-cp37m-win_amd64.whl (9.2 MB) |████████████████████████████████| 9.2 MB 1.6 MB/s Collecting pydot Downloading pydot-1.4.2-py2.py3-none-any.whl (21 kB) Collecting tabulate Downloading tabulate-0.8.9-py3-none-any.whl (25 kB) Collecting tensorboard Downloading tensorboard-2.5.0-py3-none-any.whl (6.0 MB) |████████████████████████████████| 6.0 MB 242 kB/s Requirement already satisfied: wheel>=0.26 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from tensorboard->detectron2==0.3) (0.36.2) Collecting absl-py>=0.4 Downloading absl_py-0.12.0-py3-none-any.whl (129 kB) |████████████████████████████████| 129 kB 656 kB/s Collecting google-auth<2,>=1.6.3 Downloading google_auth-1.31.0-py2.py3-none-any.whl (147 kB) |████████████████████████████████| 147 kB 939 kB/s Collecting cachetools<5.0,>=2.0.0 Downloading cachetools-4.2.2-py3-none-any.whl (11 kB) Collecting google-auth-oauthlib<0.5,>=0.4.1 Downloading google_auth_oauthlib-0.4.4-py2.py3-none-any.whl (18 kB) Collecting grpcio>=1.24.3 Downloading grpcio-1.38.0-cp37-cp37m-win_amd64.whl (3.1 MB) |████████████████████████████████| 3.1 MB 384 kB/s Collecting markdown>=2.6.8 Downloading Markdown-3.3.4-py3-none-any.whl (97 kB) |████████████████████████████████| 97 kB 384 kB/s Collecting protobuf>=3.6.0 Downloading protobuf-3.17.3-cp37-cp37m-win_amd64.whl (909 kB) |████████████████████████████████| 909 kB 107 kB/s Collecting pyasn1-modules>=0.2.1 Downloading pyasn1_modules-0.2.8-py2.py3-none-any.whl (155 kB) |████████████████████████████████| 155 kB 273 kB/s Collecting pyasn1<0.5.0,>=0.4.6 Downloading pyasn1-0.4.8-py2.py3-none-any.whl (77 kB) |████████████████████████████████| 77 kB 871 kB/s Collecting requests<3,>=2.21.0 Downloading requests-2.25.1-py2.py3-none-any.whl (61 kB) |████████████████████████████████| 61 kB 1.3 MB/s Requirement already satisfied: certifi>=2017.4.17 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from requests<3,>=2.21.0->tensorboard->detectron2==0.3) (2021.5.30) Collecting chardet<5,>=3.0.2 Downloading chardet-4.0.0-py2.py3-none-any.whl (178 kB) |████████████████████████████████| 178 kB 1.1 MB/s Collecting idna<3,>=2.5 Downloading idna-2.10-py2.py3-none-any.whl (58 kB) |████████████████████████████████| 58 kB 2.0 MB/s Collecting requests-oauthlib>=0.7.0 Downloading requests_oauthlib-1.3.0-py2.py3-none-any.whl (23 kB) Collecting oauthlib>=3.0.0 Downloading oauthlib-3.1.1-py2.py3-none-any.whl (146 kB) |████████████████████████████████| 146 kB 1.1 MB/s Collecting rsa<5,>=3.1.4 Downloading rsa-4.7.2-py3-none-any.whl (34 kB) Collecting tensorboard-data-server<0.7.0,>=0.6.0 Downloading tensorboard_data_server-0.6.1-py3-none-any.whl (2.4 kB) Collecting tensorboard-plugin-wit>=1.6.0 Downloading tensorboard_plugin_wit-1.8.0-py3-none-any.whl (781 kB) |████████████████████████████████| 781 kB 344 kB/s Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.5-py2.py3-none-any.whl (138 kB) |████████████████████████████████| 138 kB 155 kB/s Collecting werkzeug>=0.11.15 Downloading Werkzeug-2.0.1-py3-none-any.whl (288 kB) |████████████████████████████████| 288 kB 297 kB/s Collecting importlib-metadata Downloading importlib_metadata-4.5.0-py3-none-any.whl (17 kB) Collecting typing-extensions>=3.6.4 Downloading typing_extensions-3.10.0.0-py3-none-any.whl (26 kB) Collecting zipp>=0.5 Downloading zipp-3.4.1-py3-none-any.whl (5.2 kB) Building wheels for collected packages: fvcore, pycocotools, termcolor, future Building wheel for fvcore (setup.py) ... done Created wheel for fvcore: filename=fvcore-0.1.5.post20210609-py3-none-any.whl size=60466 sha256=7cd932258d3eab3630d0ad48a29471f9aa03e65a4824a6264cf2ce6303a36809 Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\c1\27\fc\0a8a889194f2b3fb0c685e360830f7622940253f6dcf0d2ac3 Building wheel for pycocotools (setup.py) ... \ WARNING: Subprocess output does not appear to be encoded as cp1254 WARNING: Subprocess output does not appear to be encoded as cp1254 WARNING: Subprocess output does not appear to be encoded as cp1254 WARNING: Subprocess output does not appear to be encoded as cp1254 done Created wheel for pycocotools: filename=pycocotools-2.0.2-cp37-cp37m-win_amd64.whl size=77583 sha256=817b3f18252a03ce0186ddbbc73c3336bcec8a7f612cfca79478932e121be13e Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\bc\cf\1b\e95c99c5f9d1648be3f500ca55e7ce55f24818b0f48336adaf Building wheel for termcolor (setup.py) ... done Created wheel for termcolor: filename=termcolor-1.1.0-py3-none-any.whl size=4829 sha256=1f9a62f7582dec530064f0880393f30877b745edd61868ec30c93b63686f3bf9 Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\3f\e3\ec\8a8336ff196023622fbcb36de0c5a5c218cbb24111d1d4c7f2 Building wheel for future (setup.py) ... done Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491059 sha256=6cc54aa1fc752a86a825a1879db33d25031dd5fd53165ce03b32d54f662b6579 Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\56\b0\fe\4410d17b32f1f0c3cf54cdfb2bc04d7b4b8f4ae377e2229ba0 Successfully built fvcore pycocotools termcolor future Installing collected packages: urllib3, pyasn1, idna, chardet, zipp, typing-extensions, rsa, requests, pywin32, pyasn1-modules, oauthlib, cachetools, tqdm, requests-oauthlib, pyyaml, python-dateutil, pyparsing, portalocker, Pillow, kiwisolver, importlib-metadata, google-auth, cycler, yacs, werkzeug, termcolor, tensorboard-plugin-wit, tensorboard-data-server, tabulate, protobuf, matplotlib, markdown, iopath, grpcio, google-auth-oauthlib, cython, absl-py, tensorboard, pydot, pycocotools, fvcore, future, cloudpickle, detectron2 Attempting uninstall: Pillow Found existing installation: Pillow 6.0.0 Uninstalling Pillow-6.0.0: Successfully uninstalled Pillow-6.0.0 Successfully installed Pillow-8.2.0 absl-py-0.12.0 cachetools-4.2.2 chardet-4.0.0 cloudpickle-1.6.0 cycler-0.10.0 cython-0.29.23 detectron2-0.3 future-0.18.2 fvcore-0.1.5.post20210609 google-auth-1.31.0 google-auth-oauthlib-0.4.4 grpcio-1.38.0 idna-2.10 importlib-metadata-4.5.0 iopath-0.1.8 kiwisolver-1.3.1 markdown-3.3.4 matplotlib-3.4.2 oauthlib-3.1.1 portalocker-2.3.0 protobuf-3.17.3 pyasn1-0.4.8 pyasn1-modules-0.2.8 pycocotools-2.0.2 pydot-1.4.2 pyparsing-2.4.7 python-dateutil-2.8.1 pywin32-301 pyyaml-5.4.1 requests-2.25.1 requests-oauthlib-1.3.0 rsa-4.7.2 tabulate-0.8.9 tensorboard-2.5.0 tensorboard-data-server-0.6.1 tensorboard-plugin-wit-1.8.0 termcolor-1.1.0 tqdm-4.61.1 typing-extensions-3.10.0.0 urllib3-1.26.5 werkzeug-2.0.1 yacs-0.1.8 zipp-3.4.1 WARNING: You are using pip version 20.3.3; however, version 21.1.2 is available. You should consider upgrading via the 'C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe -m pip install --upgrade pip' command.
(frankmocap) C:\MOCAP\frankmocap>pip install whl/opendr-0.73-py3-none-any.whl Processing c:\mocap\frankmocap\whl\opendr-0.73-py3-none-any.whl Requirement already satisfied: Cython in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from opendr==0.73) (0.29.23) Requirement already satisfied: matplotlib in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from opendr==0.73) (3.4.2) Collecting chumpy>=0.58 Downloading chumpy-0.70.tar.gz (50 kB) |████████████████████████████████| 50 kB 812 kB/s Requirement already satisfied: six>=1.11.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from chumpy>=0.58->opendr==0.73) (1.15.0) Collecting scipy>=0.13.0 Downloading scipy-1.6.3-cp37-cp37m-win_amd64.whl (32.6 MB) |████████████████████████████████| 32.6 MB 1.3 MB/s Requirement already satisfied: numpy<1.23.0,>=1.16.5 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from scipy>=0.13.0->chumpy>=0.58->opendr==0.73) (1.20.2) Requirement already satisfied: kiwisolver>=1.0.1 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr==0.73) (1.3.1) Requirement already satisfied: pillow>=6.2.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr==0.73) (8.2.0) Requirement already satisfied: pyparsing>=2.2.1 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr==0.73) (2.4.7) Requirement already satisfied: cycler>=0.10 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr==0.73) (0.10.0) Requirement already satisfied: python-dateutil>=2.7 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr==0.73) (2.8.1) Building wheels for collected packages: chumpy Building wheel for chumpy (setup.py) ... done Created wheel for chumpy: filename=chumpy-0.70-py3-none-any.whl size=58285 sha256=e038d64ce1e8e5635a5cec2ec22bd93f56b826478029b5d5f18055376c86c2d9 Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\59\68\de\5e0c5d77e573e8c150e69e07a25035e6b6a04952d6e1814dbc Successfully built chumpy Installing collected packages: scipy, chumpy, opendr Successfully installed chumpy-0.70 opendr-0.73 scipy-1.6.3 WARNING: You are using pip version 20.3.3; however, version 21.1.2 is available. You should consider upgrading via the 'C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe -m pip install --upgrade pip' command.
(frankmocap) C:\MOCAP\frankmocap>pip install whl/PyOpenGL-3.1.5-cp37-cp37m-win_amd64.whl Processing c:\mocap\frankmocap\whl\pyopengl-3.1.5-cp37-cp37m-win_amd64.whl Installing collected packages: PyOpenGL Successfully installed PyOpenGL-3.1.5 WARNING: You are using pip version 20.3.3; however, version 21.1.2 is available. You should consider upgrading via the 'C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe -m pip install --upgrade pip' command.
(frankmocap) C:\MOCAP\frankmocap>pip install whl/PyOpenGL_accelerate-3.1.5-cp37-cp37m-win_amd64.whl Processing c:\mocap\frankmocap\whl\pyopengl_accelerate-3.1.5-cp37-cp37m-win_amd64.whl Installing collected packages: PyOpenGL-accelerate Successfully installed PyOpenGL-accelerate-3.1.5 WARNING: You are using pip version 20.3.3; however, version 21.1.2 is available. You should consider upgrading via the 'C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe -m pip install --upgrade pip' command.
(frankmocap) C:\MOCAP\frankmocap>pip install -r requirements_alter.txt Requirement already satisfied: pip in c:\users\tolga\appdata\roaming\python\python37\site-packages (from -r requirements_alter.txt (line 1)) (20.3.3) Requirement already satisfied: requests in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 3)) (2.25.1) Requirement already satisfied: pycocotools in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 6)) (2.0.2) Requirement already satisfied: scipy in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 9)) (1.6.3) Requirement already satisfied: pillow>=7.1.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 10)) (8.2.0) Requirement already satisfied: cython in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 12)) (0.29.23) Requirement already satisfied: pyyaml in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 16)) (5.4.1) Requirement already satisfied: tqdm in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 18)) (4.61.1) Requirement already satisfied: opendr in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 22)) (0.73) Requirement already satisfied: chumpy in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from -r requirements_alter.txt (line 23)) (0.70) Collecting cffi Downloading cffi-1.14.5-cp37-cp37m-win_amd64.whl (178 kB) |████████████████████████████████| 178 kB 939 kB/s Requirement already satisfied: six>=1.11.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from chumpy->-r requirements_alter.txt (line 23)) (1.15.0) Requirement already satisfied: numpy<1.23.0,>=1.16.5 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from scipy->-r requirements_alter.txt (line 9)) (1.20.2) Collecting easydict Downloading easydict-1.9.tar.gz (6.4 kB) Collecting gdown Downloading gdown-3.13.0.tar.gz (9.3 kB) Installing build dependencies ... done Getting requirements to build wheel ... done Preparing wheel metadata ... done Requirement already satisfied: certifi>=2017.4.17 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from requests->-r requirements_alter.txt (line 3)) (2021.5.30) Requirement already satisfied: urllib3<1.27,>=1.21.1 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from requests->-r requirements_alter.txt (line 3)) (1.26.5) Requirement already satisfied: idna<3,>=2.5 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from requests->-r requirements_alter.txt (line 3)) (2.10) Requirement already satisfied: chardet<5,>=3.0.2 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from requests->-r requirements_alter.txt (line 3)) (4.0.0) Collecting PySocks!=1.5.7,>=1.5.6 Downloading PySocks-1.7.1-py3-none-any.whl (16 kB) Collecting gitpython Downloading GitPython-3.1.17-py3-none-any.whl (166 kB) |████████████████████████████████| 166 kB 1.3 MB/s Requirement already satisfied: typing-extensions>=3.7.4.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from gitpython->-r requirements_alter.txt (line 4)) (3.10.0.0) Collecting gitdb<5,>=4.0.1 Downloading gitdb-4.0.7-py3-none-any.whl (63 kB) |████████████████████████████████| 63 kB 657 kB/s Collecting smmap<5,>=3.0.1 Downloading smmap-4.0.0-py2.py3-none-any.whl (24 kB) Collecting jinja2 Downloading Jinja2-3.0.1-py3-none-any.whl (133 kB) |████████████████████████████████| 133 kB 544 kB/s Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.0.1-cp37-cp37m-win_amd64.whl (14 kB) Collecting msgpack Downloading msgpack-1.0.2-cp37-cp37m-win_amd64.whl (68 kB) |████████████████████████████████| 68 kB 393 kB/s Collecting opencv-python Downloading opencv_python-4.5.2.54-cp37-cp37m-win_amd64.whl (34.7 MB) |████████████████████████████████| 34.7 MB 8.2 kB/s Requirement already satisfied: matplotlib in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from opendr->-r requirements_alter.txt (line 22)) (3.4.2) Collecting pafy Downloading pafy-0.5.5-py2.py3-none-any.whl (35 kB) Requirement already satisfied: setuptools>=18.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from pycocotools->-r requirements_alter.txt (line 6)) (52.0.0.post20210125) Requirement already satisfied: cycler>=0.10 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr->-r requirements_alter.txt (line 22)) (0.10.0) Requirement already satisfied: pyparsing>=2.2.1 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr->-r requirements_alter.txt (line 22)) (2.4.7) Requirement already satisfied: kiwisolver>=1.0.1 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr->-r requirements_alter.txt (line 22)) (1.3.1) Requirement already satisfied: python-dateutil>=2.7 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from matplotlib->opendr->-r requirements_alter.txt (line 22)) (2.8.1) Collecting sklearn Downloading sklearn-0.0.tar.gz (1.1 kB) Collecting smplx Downloading smplx-0.1.28-py3-none-any.whl (29 kB) Requirement already satisfied: torch>=1.0.1.post2 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from smplx->-r requirements_alter.txt (line 20)) (1.6.0) Requirement already satisfied: future in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from torch>=1.0.1.post2->smplx->-r requirements_alter.txt (line 20)) (0.18.2) Collecting tensorboardX Downloading tensorboardX-2.2-py2.py3-none-any.whl (120 kB) |████████████████████████████████| 120 kB 297 kB/s Requirement already satisfied: protobuf>=3.8.0 in c:\users\tolga\miniconda3\envs\frankmocap\lib\site-packages (from tensorboardX->-r requirements_alter.txt (line 17)) (3.17.3) Collecting youtube-dl Downloading youtube_dl-2021.6.6-py2.py3-none-any.whl (1.9 MB) |████████████████████████████████| 1.9 MB 384 kB/s Collecting filelock Downloading filelock-3.0.12-py3-none-any.whl (7.6 kB) Collecting pycparser Downloading pycparser-2.20-py2.py3-none-any.whl (112 kB) |████████████████████████████████| 112 kB 544 kB/s Collecting scikit-learn Downloading scikit_learn-0.24.2-cp37-cp37m-win_amd64.whl (6.8 MB) |████████████████████████████████| 6.8 MB 65 kB/s Collecting joblib>=0.11 Downloading joblib-1.0.1-py3-none-any.whl (303 kB) |████████████████████████████████| 303 kB 1.3 MB/s Collecting threadpoolctl>=2.0.0 Downloading threadpoolctl-2.1.0-py3-none-any.whl (12 kB) Building wheels for collected packages: easydict, gdown, sklearn Building wheel for easydict (setup.py) ... done Created wheel for easydict: filename=easydict-1.9-py3-none-any.whl size=6350 sha256=a19a4f028734847e1b38bd74113ad97d44ed5e48f70ee570d25fd3a828a3cc10 Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\88\96\68\c2be18e7406804be2e593e1c37845f2dd20ac2ce1381ce40b0 Building wheel for gdown (PEP 517) ... done Created wheel for gdown: filename=gdown-3.13.0-py3-none-any.whl size=9034 sha256=419c0f0604562782b114a83eb16c9bb48cab47c2c42dff17ea03de54f538a866 Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\2f\2a\2f\86449b6bdbaa9aef873f68332b68be6bfbc386b9219f47157d Building wheel for sklearn (setup.py) ... done Created wheel for sklearn: filename=sklearn-0.0-py2.py3-none-any.whl size=1316 sha256=dbf68f86eb109f0ee75e2e1f00c1228982e5e38a238e16449c0b2c625d662130 Stored in directory: c:\users\tolga\appdata\local\pip\cache\wheels\46\ef\c3\157e41f5ee1372d1be90b09f74f82b10e391eaacca8f22d33e Successfully built easydict gdown sklearn Installing collected packages: threadpoolctl, smmap, PySocks, joblib, scikit-learn, pycparser, MarkupSafe, gitdb, filelock, youtube-dl, tensorboardX, smplx, sklearn, pafy, opencv-python, msgpack, jinja2, gitpython, gdown, easydict, cffi Successfully installed MarkupSafe-2.0.1 PySocks-1.7.1 cffi-1.14.5 easydict-1.9 filelock-3.0.12 gdown-3.13.0 gitdb-4.0.7 gitpython-3.1.17 jinja2-3.0.1 joblib-1.0.1 msgpack-1.0.2 opencv-python-4.5.2.54 pafy-0.5.5 pycparser-2.20 scikit-learn-0.24.2 sklearn-0.0 smmap-4.0.0 smplx-0.1.28 tensorboardX-2.2 threadpoolctl-2.1.0 youtube-dl-2021.6.6 WARNING: You are using pip version 20.3.3; however, version 21.1.2 is available. You should consider upgrading via the 'C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe -m pip install --upgrade pip' command.
(frankmocap) C:\MOCAP\frankmocap>echo Installing a third-party 2D keypoint detector Installing a third-party 2D keypoint detector
(frankmocap) C:\MOCAP\frankmocap>python scripts_py/install_pose2d.py Traceback (most recent call last): File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git__init.py", line 87, in
refresh()
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git\ init__.py", line 76, in refresh
if not Git.refresh(path=path):
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git\cmd.py", line 309, in refresh
raise ImportError(err)
ImportError: Bad git executable.
The git executable must be specified in one of the following ways:
All git commands will error until this is rectified.
This initial warning can be silenced or aggravated in the future by setting the $GIT_PYTHON_REFRESH environment variable. Use one of the following values:
Example: export GIT_PYTHON_REFRESH=quiet
The above exception was the direct cause of the following exception:
Traceback (most recent call last): File "scripts_py/install_pose2d.py", line 3, in
import git
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git__init__.py", line 89, in
raise ImportError('Failed to initialize: {0}'.format(exc)) from exc
ImportError: Failed to initialize: Bad git executable.
The git executable must be specified in one of the following ways:
All git commands will error until this is rectified.
This initial warning can be silenced or aggravated in the future by setting the $GIT_PYTHON_REFRESH environment variable. Use one of the following values:
Example: export GIT_PYTHON_REFRESH=quiet
(frankmocap) C:\MOCAP\frankmocap>echo Download extra data for body module Download extra data for body module
(frankmocap) C:\MOCAP\frankmocap>python scripts_py/download_data_body_module.py Successfully created the directory C:\MOCAP\frankmocap/extra_data/body_module Downloading: data.tar.gz Successfully created the directory C:\MOCAP\frankmocap/extra_data/body_module/pretrained_weights
Downloading pretrained_weights
Downloading: 2020_05_31-00_50_43-best-51.749683916568756.pt Downloading: smplx-03-28-46060-w_spin_mlc3d_46582-2089_2020_03_28-21_56_16.pt
Downloading other data
Downloading: J_regressor_extra_smplx.npy
(frankmocap) C:\MOCAP\frankmocap>echo Installing a third-party hand detector Installing a third-party hand detector
(frankmocap) C:\MOCAP\frankmocap>python scripts_py/install_hand_detectors.py Traceback (most recent call last): File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git__init.py", line 87, in
refresh()
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git\ init__.py", line 76, in refresh
if not Git.refresh(path=path):
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git\cmd.py", line 309, in refresh
raise ImportError(err)
ImportError: Bad git executable.
The git executable must be specified in one of the following ways:
All git commands will error until this is rectified.
This initial warning can be silenced or aggravated in the future by setting the $GIT_PYTHON_REFRESH environment variable. Use one of the following values:
Example: export GIT_PYTHON_REFRESH=quiet
The above exception was the direct cause of the following exception:
Traceback (most recent call last): File "scripts_py/install_hand_detectors.py", line 3, in
import git,gdown
File "C:\Users\Tolga\miniconda3\envs\frankmocap\lib\site-packages\git__init__.py", line 89, in
raise ImportError('Failed to initialize: {0}'.format(exc)) from exc
ImportError: Failed to initialize: Bad git executable.
The git executable must be specified in one of the following ways:
All git commands will error until this is rectified.
This initial warning can be silenced or aggravated in the future by setting the $GIT_PYTHON_REFRESH environment variable. Use one of the following values:
Example: export GIT_PYTHON_REFRESH=quiet
(frankmocap) C:\MOCAP\frankmocap>rem installing the hand object detector
(frankmocap) C:\MOCAP\frankmocap>REM "C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC\Auxiliary\Build\vcvars64.bat"
(frankmocap) C:\MOCAP\frankmocap>set DISTUTILS_USE_SDK=1
(frankmocap) C:\MOCAP\frankmocap>cd detectors\hand_object_detector\lib Sistem belirtilen yolu bulamıyor.
(frankmocap) C:\MOCAP\frankmocap>python setup.py build develop python: can't open file 'setup.py': [Errno 2] No such file or directory
(frankmocap) C:\MOCAP\frankmocap>cd ../../..
(frankmocap) C:>echo Download extra data for hand module Download extra data for hand module
(frankmocap) C:>python scripts_py/download_data_hand_module.py python: can't open file 'scripts_py/download_data_hand_module.py': [Errno 2] No such file or directory
(frankmocap) C:>echo Downloading sample videos Downloading sample videos
(frankmocap) C:>python scripts_py/download_sample_video.py python: can't open file 'scripts_py/download_sample_video.py': [Errno 2] No such file or directory
(frankmocap) C:>python -m demo.demo_frankmocap --input_path ./sampledata/single_totalbody.mp4 --out_dir ./mocap_output --save_pred_pkl C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe: Error while finding module specification for 'demo.demo_frankmocap' (ModuleNotFoundError: No module named 'demo')
(frankmocap) C:>python -m demo.demo_frankmocap --input_path ./sampledata/single_totalbody.mp4 --out_dir ./mocap_output --save_pred_pkl C:\Users\Tolga\miniconda3\envs\frankmocap\python.exe: Error while finding module specification for 'demo.demo_frankmocap' (ModuleNotFoundError: No module named 'demo')
(frankmocap) C:>