search

caseda / com.tkbhome

TKB Home devices for Homey
5 stars 17 forks source link

TKB home Smart Energy Wallplug TZ69 can’t see the voltage measurement #57

Open lucas66a opened 5 years ago

lucas66a commented 5 years ago

Hi,

I have a couple of TKB TZ69 Smart Energy Wallplug’s, Homey see’s them fine using your driver.

However I previously used these with home assistant and they reported back Voltage, this is missing on Homey. I would very much like to graph voltage as I think I’m getting spikes that i'd like to investigate.

Is it possible to add the voltage measurements in the driver?

Thanks

caseda commented 5 years ago

i'll see if i can quickly add this capability into the app's driver this weekend. As i don't have any of these devices i can't test if it works or not, so i will be reliant on you (or anyone else with this device) for this.

lucas66a commented 5 years ago

Fantastic, I’ll be happy to test.

Sent from my iPad

On 12 Sep 2019, at 19:28, R Mengers notifications@github.com<mailto:notifications@github.com> wrote:

i'll see if i can quickly add this capability into the app's driver this weekend. As i don't have any of these devices i can't test if it works or not, so i will be reliant on you (or anyone else with this device) for this.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fcaseda%2Fcom.tkbhome%2Fissues%2F57%3Femail_source%3Dnotifications%26email_token%3DALOE2PGHDV3KFQFG3GQXYHLQJKC4HA5CNFSM4H4NOLIKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6S2F6Q%23issuecomment-530948858&data=02%7C01%7C%7C82cca48144c84fc1596e08d737aefcd3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637039097006586557&sdata=VyqeEhC4BqCqgea4eqL%2FiZ%2FUecGkdxSKgTN%2Be6nW9z0%3D&reserved=0, or mute the threadhttps://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FALOE2PDDJVJADVBJYNEDPWTQJKC4HANCNFSM4H4NOLIA&data=02%7C01%7C%7C82cca48144c84fc1596e08d737aefcd3%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637039097006606579&sdata=4%2Fwt2ovFIaHVaQzLWz%2BGSDXVdDNckbbQ6rnY2FYsXV8%3D&reserved=0.

Ramonzuidgeest commented 4 years ago

I have the same problem. No watt report. When do you think it will work? Or Dit I install it wrong? Tkb home TZ69G Thanks

caseda commented 4 years ago

@Ramonzuidgeest Wattage not reporting and the OP's Voltage entirely not being there, are 2 different values/issues, And as i don't have this device myself it is really hard to tell you what is wrong if you didn't change any of the advanced settings

Ramonzuidgeest commented 4 years ago

Oke, thanks. Will you support this device in the future? Greetings?

CyberSponk commented 4 years ago

Got a TZ69 since a few days. Firmware of Device is 1026, Tkb-App 2.0.5 and Homey 3.1.0. Wattage (Energie, the left value) works. Could not say if Kwh (Energiezähler, the richgt vaulue) works because pluged the Device today. Perhaps helps this Information.

Ramonzuidgeest commented 4 years ago

I paired again and the watt report works fine. Thanks

caseda commented 4 years ago

the voltage information should be visible now in the 2.0.6 version of the app.

You can find the 2.0.6 update in the test part of the appstore: https://homey.app/a/com.tkbhome/test/ And please confirm that your issue was fixed in this update.

lucas66a commented 4 years ago

Hi, I can confirm I can see the voltage measurement, looks good. I’ll keep an eye on this and report on any issues. Thanks for making these changes.