SChernykh/p2pool (SChernykh/p2pool)
### [`v4.0`](https://togithub.com/SChernykh/p2pool/releases/tag/v4.0): P2Pool v4.0
[Compare Source](https://togithub.com/SChernykh/p2pool/compare/v3.10...v4.0)
[Commits to master since this release](https://togithub.com/SChernykh/p2pool/compare/v4.0...master)
##### P2Pool will hardfork to new consensus rules on October 12th, 2024 at 20:00 UTC (note that only P2Pool will hardfork, Monero blockchain will not hardfork on October 12th). Merge mining will be enabled at that time. You must update to P2Pool v4.0 or newer before this date.
**Changes in v4.0**
New features:
- **[Merge mining support](https://togithub.com/SChernykh/p2pool?tab=readme-ov-file#merge-mining)** (available after the fork)
- Stratum: calculate hashing blobs in parallel (improved performance with high number of connected miners)
- Stratum: autodiff will use 500k starting difficulty now for faster adjustment
Bugfixes:
- Updated internal dependencies to the latest versions (curl to 8.8.0, libuv to 1.48, miniupnp and libzmq to the latest master branch)
- Exit early with an error message if the command line is invalid, P2Pool will not try to start in this case
- Fixed a few rare crashes and data races
Before you start mining, create a new wallet and don't use it for anything else but mining for privacy reasons - all wallet addresses are public on P2Pool! Only primary wallet address is supported - no subaddresses or integrated addresses.
**It is strongly recommended to synchronize your system clock before you start mining!**
##### Recommended monerod command line parameters:
./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist
`--out-peers 32 --in-peers 64` is needed to (1) have many connections to other nodes and (2) limit incoming connection count because it can grow uncontrollably and cause problems when it goes above 1000 (open files limit in Linux). If your network connection's **upload** bandwidth is less than **10 Mbit**, use `--out-peers 8 --in-peers 16` instead.
`--add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080` is needed to have guaranteed good working nodes in your connected peers.
`--disable-dns-checkpoints` is needed to avoid periodical lags when DNS is updated (it's not needed when mining)
`--enable-dns-blocklist` is needed to ban known bad nodes
Usage:
- Run Monero daemon **v0.18.3.3** or newer: `./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist`
- Run p2pool: `./p2pool --host 127.0.0.1 --wallet YOUR_WALLET_ADDRESS`
- Start mining to port 3333 on your machine: `./xmrig -o 127.0.0.1:3333`
- You can set custom difficulty for your miner to get more accurate stats on P2Pool side: `./xmrig -o 127.0.0.1:3333 -u x+50000` (it doesn't affect mining rewards in any way)
- To connect another mining rig to your P2Pool node, run `./xmrig -o YOUR_P2POOL_NODE_IP:3333` on that mining rig
##### Antivirus
Some antiviruses and firewalls may flag any Monero-related executables and archives, including P2Pool, as malware. This is because it contains RandomX mining code and therefore is considered as "mining software". To be sure that you downloaded the original binaries, always check SHA256 sums of what you downloaded - a GPG signed list of SHA256 sums is in `sha256sums.txt.asc`. You can read the instructions on how to do it here: https://www.getmonero.org/resources/user-guides/verification-windows-beginner.html - but to check P2Pool binaries, replace binaryFate's key with the GPG key provided here:
- GPG key to verify SHA256 sums can be downloaded from [github](https://raw.githubusercontent.com/monero-project/gitian.sigs/master/gitian-pubkeys/SChernykh.asc) or [p2pool.io](https://p2pool.io/SChernykh.asc)
Configuration
📅 Schedule: Branch creation - "after 1pm,before 3pm" in timezone Europe/Paris, Automerge - At any time (no schedule defined).
🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.
♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.
🔕 Ignore: Close this PR and you won't be reminded about this update again.
[ ] If you want to rebase/retry this PR, check this box
This PR has been generated by Mend Renovate. View repository job log here.
This PR contains the following updates:
v3.10->v4.0Release Notes
SChernykh/p2pool (SChernykh/p2pool)
### [`v4.0`](https://togithub.com/SChernykh/p2pool/releases/tag/v4.0): P2Pool v4.0 [Compare Source](https://togithub.com/SChernykh/p2pool/compare/v3.10...v4.0) [Commits to master since this release](https://togithub.com/SChernykh/p2pool/compare/v4.0...master) ##### P2Pool will hardfork to new consensus rules on October 12th, 2024 at 20:00 UTC (note that only P2Pool will hardfork, Monero blockchain will not hardfork on October 12th). Merge mining will be enabled at that time. You must update to P2Pool v4.0 or newer before this date. **Changes in v4.0** New features: - **[Merge mining support](https://togithub.com/SChernykh/p2pool?tab=readme-ov-file#merge-mining)** (available after the fork) - Stratum: calculate hashing blobs in parallel (improved performance with high number of connected miners) - Stratum: autodiff will use 500k starting difficulty now for faster adjustment Bugfixes: - Updated internal dependencies to the latest versions (curl to 8.8.0, libuv to 1.48, miniupnp and libzmq to the latest master branch) - Exit early with an error message if the command line is invalid, P2Pool will not try to start in this case - Fixed a few rare crashes and data races Before you start mining, create a new wallet and don't use it for anything else but mining for privacy reasons - all wallet addresses are public on P2Pool! Only primary wallet address is supported - no subaddresses or integrated addresses. **It is strongly recommended to synchronize your system clock before you start mining!** ##### Recommended monerod command line parameters: ./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist `--out-peers 32 --in-peers 64` is needed to (1) have many connections to other nodes and (2) limit incoming connection count because it can grow uncontrollably and cause problems when it goes above 1000 (open files limit in Linux). If your network connection's **upload** bandwidth is less than **10 Mbit**, use `--out-peers 8 --in-peers 16` instead. `--add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080` is needed to have guaranteed good working nodes in your connected peers. `--disable-dns-checkpoints` is needed to avoid periodical lags when DNS is updated (it's not needed when mining) `--enable-dns-blocklist` is needed to ban known bad nodes Usage: - Run Monero daemon **v0.18.3.3** or newer: `./monerod --zmq-pub tcp://127.0.0.1:18083 --out-peers 32 --in-peers 64 --add-priority-node=p2pmd.xmrvsbeast.com:18080 --add-priority-node=nodes.hashvault.pro:18080 --disable-dns-checkpoints --enable-dns-blocklist` - Run p2pool: `./p2pool --host 127.0.0.1 --wallet YOUR_WALLET_ADDRESS` - Start mining to port 3333 on your machine: `./xmrig -o 127.0.0.1:3333` - You can set custom difficulty for your miner to get more accurate stats on P2Pool side: `./xmrig -o 127.0.0.1:3333 -u x+50000` (it doesn't affect mining rewards in any way) - To connect another mining rig to your P2Pool node, run `./xmrig -o YOUR_P2POOL_NODE_IP:3333` on that mining rig ##### Antivirus Some antiviruses and firewalls may flag any Monero-related executables and archives, including P2Pool, as malware. This is because it contains RandomX mining code and therefore is considered as "mining software". To be sure that you downloaded the original binaries, always check SHA256 sums of what you downloaded - a GPG signed list of SHA256 sums is in `sha256sums.txt.asc`. You can read the instructions on how to do it here: https://www.getmonero.org/resources/user-guides/verification-windows-beginner.html - but to check P2Pool binaries, replace binaryFate's key with the GPG key provided here: - GPG key to verify SHA256 sums can be downloaded from [github](https://raw.githubusercontent.com/monero-project/gitian.sigs/master/gitian-pubkeys/SChernykh.asc) or [p2pool.io](https://p2pool.io/SChernykh.asc)Configuration
📅 Schedule: Branch creation - "after 1pm,before 3pm" in timezone Europe/Paris, Automerge - At any time (no schedule defined).
🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.
♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.
🔕 Ignore: Close this PR and you won't be reminded about this update again.
This PR has been generated by Mend Renovate. View repository job log here.