* -W --power num: power to all inputs (0 = only active inputs, 1 = all inputs)
But the parameter is not known:
# minisatip -f -l axe -e 0 -W 0
minisatip: unrecognized option '-W'
[24/02 19:06:44.392]: minisatip version 1.1.78, compiled in Feb 19 2022 12:08:17, with s2api version: 0501
[24/02 19:06:44.393]: Built with dvbcsa
[24/02 19:06:44.393]: Built without CI
[24/02 19:06:44.393]: Built with dvbapi
[24/02 19:06:44.393]: Built without AES (OpenSSL)
[24/02 19:06:44.393]: Built with tables processing
[24/02 19:06:44.393]: Built with pmt processing
[24/02 19:06:44.393]: Built with satip client
[24/02 19:06:44.393]: Built with linux dvb client
[24/02 19:06:44.394]: Built with backtrace
[24/02 19:06:44.394]: Built without netceiver
[24/02 19:06:44.394]: Built without ddci
[24/02 19:06:44.394]: Built without t2mi
[24/02 19:06:44.394]: Built for satip-axe
# minisatip -f -l axe --power 0
minisatip: unrecognized option '--power'
[19/02 17:06:59.552]: minisatip version 1.1.78, compiled in Feb 19 2022 12:08:17, with s2api version: 0501
[19/02 17:06:59.553]: Built with dvbcsa
[19/02 17:06:59.553]: Built without CI
[19/02 17:06:59.553]: Built with dvbapi
[19/02 17:06:59.553]: Built without AES (OpenSSL)
[19/02 17:06:59.553]: Built with tables processing
[19/02 17:06:59.553]: Built with pmt processing
[19/02 17:06:59.553]: Built with satip client
[19/02 17:06:59.553]: Built with linux dvb client
[19/02 17:06:59.553]: Built with backtrace
[19/02 17:06:59.553]: Built without netceiver
[19/02 17:06:59.553]: Built without ddci
[19/02 17:06:59.553]: Built without t2mi
[19/02 17:06:59.553]: Built for satip-axe
In the past, I used a patched firmware binary where the following combination works to activate only one LNB:
# minisatip8 -f -l axe -e 0 -W 0
[23/02 19:40:05.560 main]: minisatip version 0.7.16-axe215, compiled with s2api version: 0501
[23/02 19:40:05.560 main]: Built without dvbcsa
[23/02 19:40:05.561 main]: Built without CI
[23/02 19:40:05.561 main]: Built without dvbapi
[23/02 19:40:05.561 main]: Built without AES (OpenSSL)
[23/02 19:40:05.561 main]: Built without tables processing
[23/02 19:40:05.561 main]: Built without pmt processing
[23/02 19:40:05.561 main]: Built with satip client
[23/02 19:40:05.562 main]: Built with linux dvb client
[23/02 19:40:05.562 main]: Built with backtrace
[23/02 19:40:05.562 main]: Built without netceiver
[23/02 19:40:05.562 main]: Built for satip-axe
minisatip help shows parameter W or power:
* -W --power num: power to all inputs (0 = only active inputs, 1 = all inputs)But the parameter is not known:
In the past, I used a patched firmware binary where the following combination works to activate only one LNB:
Parameter '--power' was also unknown: