Signal strength and SNR values (doesn't take -M parameters)

catalinii / minisatip

minisatip is an SATIP server for linux using local DVB-S2, DVB-C, DVB-T or ATSC cards

https://minisatip.org

327 stars 80 forks source link

Signal strength and SNR values (doesn't take -M parameters) #965

Closed ghost closed 2 years ago

ghost commented 2 years ago

When using -M parameter, it doesn't do anything with it when I set the STR/SNR values to 0 for all adapters for example (to get 100%) or any other value in the status page of minisatip on port 8080. Is this a bug?

capture str snr

Jalle19 commented 2 years ago

@retrofan1979 does it work correctly if you specify the adapters manually (e.g. 0:0-0,1:0-0) instead of using *:0-0?

ghost commented 2 years ago

No, unfortunately not.

Jalle19 commented 2 years ago

Can you post a log with -l general,dvb?

ghost commented 2 years ago

Sure! minisatip.log

Jalle19 commented 2 years ago

@retrofan1979 can you try https://github.com/Jalle19/minisatip/commit/daf83620c0c30c65b91f7a6a606bdcdadb4a1298 ?

ghost commented 2 years ago

I did recompile minisatip again, but no change. Here's the log again minisatip.log