throttling

[spencershaw]

How do i specify throttling settings?

[spencershaw]

Posted too soon. Found this: https://sites.google.com/a/webpagetest.org/docs/advanced-features/webpagetest-restful-apis

Specifying connectivity

If the connectivity is not specified, by default you will get the Cable (5/1 Mbps, 28ms RTT) profile. The connectivity is specified as part of the location in the format: location:browser.connectivity

For example: Dulles_IE7.DSL Frankfurt.Dial China.custom Dulles:Chrome.DSL

The supported profiles for the public instance are: DSL - 1.5 Mbps down, 384 Kbps up, 50 ms first-hop RTT, 0% packet loss Cable - 5 Mbps down, 1 Mbps up, 28ms first-hop RTT, 0% packet loss FIOS - 20 Mbps down, 5 Mbps up, 4 ms first-hop RTT, 0% packet loss (not all locations will get the full bandwidth) Dial - 49 Kbps down, 30 Kbps up, 120 ms first-hop RTT, 0% packet loss 3G - 1.6 Mbps down, 768 Kbps up, 300 ms first-hop RTT, 0% packet loss 3GFast - 1.6 Mbps down, 768 Kbps up, 150 ms first-hop RTT, 0% packet loss Native - No synthetic traffic shaping applied custom - Custom profile, bandwidth and latency must also be specified using the bwIn, bwOut, latency and plr parameters

[spencershaw]

When I put for example ec2-eu-west-1:Chrome.3G in the Location field, it still gives the default Cable speed. What am I doing wrong

[andydavies]

I've just tried the following in the location field and they both work OK

ec2-eu-west-1:Chrome.3G - http://www.webpagetest.org/result/160704_RZ_Y1E/ ec2-eu-west-1:Chrome.2G - http://www.webpagetest.org/result/160704_6N_Y1G/

Do any of the other default values work (list below)?

.Cable .DSL .Dial .3G .3GFast .3GSlow .Edge .2G .Native .custom

[spencershaw]

thanks andy. Seems to be ok now

On Mon, Jul 4, 2016 at 8:09 PM, Andy Davies notifications@github.com wrote:

I've just tried the following in the location field and they both work OK

ec2-eu-west-1:Chrome.3G - http://www.webpagetest.org/result/160704_RZ_Y1E/ ec2-eu-west-1:Chrome.2G - http://www.webpagetest.org/result/160704_6N_Y1G/

Do any of the other default values work (list below)?

.Cable .DSL .Dial .3G .3GFast .3GSlow .Edge .2G .Native .custom

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/andydavies/WPT-Bulk-Tester/issues/15#issuecomment-230343179, or mute the thread https://github.com/notifications/unsubscribe/AMbZyBllw2bOpSVQV26UHK_rX8kOqsxXks5qSVprgaJpZM4JD-V3 .

Spencer Shaw | Chief Technical Officer

[image: Phone]: 020 7112 9321 | 07932 080811

[image: Streetlike Logo]

WeHub, 2A Redbourne Avenue, Finchley, London, N3 2BS