add-on fails to run

[billchurch]

Current version: 2024.1.9 Home Assistant Version: 2024.1.5 and 2024.1.6

Load with a custom config, see this at startup:

s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
/run.sh: line 25: device_id_1: unbound variable
s6-rc: info: service legacy-services: stopping
s6-rc: info: service legacy-services successfully stopped
s6-rc: info: service legacy-cont-init: stopping
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped

Custom config:

# version 0.0.6  

report_meta level
report_meta noise
report_meta stats
report_meta time:iso:usec:tz
report_meta protocol

# For RTL-SDR: gain in tenths of dB ("0" is auto).
gain 0

# usb device index 
# device 0

# this is suggested
convert si

## default is "433.92M", other reasonable values are 315M, 345M, 915M and 868M
frequency     915M

# default is "600" seconds, only used when multiple frequencies are given
hop_interval  600

# default is "250k", other valid settings are 1024k, 2048k, 3200k
sample_rate   250k

#  Set minlevel automatically based on average estimated noise.
pulse_detect autolevel

#  Skip frames below estimated noise level to lower cpu load.
pulse_detect squelch

# Log levels 1=fatal, 2=critical, 3=error, 4=warning (default), 5=notice, 6=info, 7=debug, 8=trace
# uncomment below line for debug mode.
verbose 4

## uncheck if you are using this add-on with legacy mqtt
output mqtt://core-mosquitto:1883,user="",pass="",retain=1,devices=rtl_433/9b13b3f4-rtl433/devices[/type][/model][/subtype][/channel][/id],events=rtl_433/9b13b3f4-rtl433/events,states=rtl_433/9b13b3f4-rtl433/states

output kv
output json

# Everything is disabled by default. Simply remove the  "-" before the protocol number to enable.

  protocol -1   # Silvercrest Remote Control
  protocol -2   # Rubicson, TFA 30.3197 or InFactory PT-310 Temperature Sensor
  protocol -3   # Prologue, FreeTec NC-7104, NC-7159-675 temperature sensor
  protocol -4   # Waveman Switch Transmitter
# protocol -6   # ELV EM 1000
# protocol -7   # ELV WS 2000
  protocol -8   # LaCrosse TX Temperature / Humidity Sensor
  protocol -10  # Acurite 896 Rain Gauge
  protocol -11  # Acurite 609TXC Temperature and Humidity Sensor
  protocol -12  # Oregon Scientific Weather Sensor
# protocol -13  # Mebus 433
# protocol -14  # Intertechno 433
  protocol -15  # KlikAanKlikUit Wireless Switch
  protocol -16  # AlectoV1 Weather Sensor (Alecto WS3500 WS4500 Ventus W155/W044 Oregon)
  protocol -17  # Cardin S466-TX2
  protocol -18  # Fine Offset Electronics, WH2, WH5, Telldus Temperature/Humidity/Rain Sensor
  protocol -19  # Nexus, FreeTec NC-7345, NX-3980, Solight TE82S, TFA 30.3209 temperature/humidity sensor
  protocol -20  # Ambient Weather F007TH, TFA 30.3208.02, SwitchDocLabs F016TH temperature sensor
  protocol -21  # Calibeur RF-104 Sensor
  protocol -22  # X10 RF
  protocol -23  # DSC Security Contact
# protocol -24  # Brennenstuhl RCS 2044
  protocol -25  # Globaltronics GT-WT-02 Sensor
  protocol -26  # Danfoss CFR Thermostat
  protocol -29  # Chuango Security Technology
  protocol -30  # Generic Remote SC226x EV1527
  protocol -31  # TFA-Twin-Plus-30.3049, Conrad KW9010, Ea2 BL999
  protocol -32  # Fine Offset Electronics WH1080/WH3080 Weather Station
  protocol -33  # WT450, WT260H, WT405H
  protocol -34  # LaCrosse WS-2310 / WS-3600 Weather Station
  protocol -35  # Esperanza EWS
  protocol -36  # Efergy e2 classic
# protocol -37  # Inovalley kw9015b, TFA Dostmann 30.3161 (Rain and temperature sensor)
  protocol -38  # Generic temperature sensor 1
  protocol -39  # WG-PB12V1 Temperature Sensor
  protocol -40  # Acurite 592TXR Temp/Humidity, 592TX Temp, 5n1 Weather Station, 6045 Lightning, 899 Rain, 3N1, Atlas
  protocol -41  # Acurite 986 Refrigerator / Freezer Thermometer
  protocol -42  # HIDEKI TS04 Temperature, Humidity, Wind and Rain Sensor
  protocol -43  # Watchman Sonic / Apollo Ultrasonic / Beckett Rocket oil tank monitor
  protocol -44  # CurrentCost Current Sensor
  protocol -45  # emonTx OpenEnergyMonitor
  protocol -46  # HT680 Remote control
  protocol -47  # Conrad S3318P, FreeTec NC-5849-913 temperature humidity sensor
  protocol -48  # Akhan 100F14 remote keyless entry
  protocol -49  # Quhwa
  protocol -50  # OSv1 Temperature Sensor
  protocol -51  # Proove / Nexa / KlikAanKlikUit Wireless Switch
  protocol -52  # Bresser Thermo-/Hygro-Sensor 3CH
  protocol -53  # Springfield Temperature and Soil Moisture
  protocol -54  # Oregon Scientific SL109H Remote Thermal Hygro Sensor
  protocol -55  # Acurite 606TX Temperature Sensor
  protocol -56  # TFA pool temperature sensor
  protocol -57  # Kedsum Temperature & Humidity Sensor, Pearl NC-7415
  protocol -58  # Blyss DC5-UK-WH
# protocol -61  # LightwaveRF
# protocol -62  # Elro DB286A Doorbell
  protocol -63  # Efergy Optical
# protocol -64  # Honda Car Key
  protocol -67  # Radiohead ASK
  protocol -68  # Kerui PIR / Contact Sensor
  protocol -69  # Fine Offset WH1050 Weather Station
  protocol -70  # Honeywell Door/Window Sensor, 2Gig DW10/DW11, RE208 repeater
  protocol -71  # Maverick ET-732/733 BBQ Sensor
# protocol -72  # RF-tech
  protocol -73  # LaCrosse TX141-Bv2, TX141TH-Bv2, TX141-Bv3, TX141W, TX145wsdth, (TFA, ORIA) sensor
  protocol -74  # Acurite 00275rm,00276rm Temp/Humidity with optional probe
  protocol -75  # LaCrosse TX35DTH-IT, TFA Dostmann 30.3155 Temperature/Humidity sensor
  protocol -76  # LaCrosse TX29IT, TFA Dostmann 30.3159.IT Temperature sensor
  protocol -77  # Vaillant calorMatic VRT340f Central Heating Control
  protocol 78  # Fine Offset Electronics, WH25, WH32B, WH24, WH65B, HP1000, Misol WS2320 Temperature/Humidity/Pressure Sensor
  protocol 79  # Fine Offset Electronics, WH0530 Temperature/Rain Sensor
  protocol -80  # IBIS beacon
  protocol -81  # Oil Ultrasonic STANDARD FSK
  protocol -83  # Oil Ultrasonic STANDARD ASK
  protocol -84  # Thermopro TP11 Thermometer
  protocol -85  # Solight TE44/TE66, EMOS E0107T, NX-6876-917
  protocol -86  # Wireless Smoke and Heat Detector GS 558
  protocol -87  # Generic wireless motion sensor
  protocol -91  # inFactory, nor-tec, FreeTec NC-3982-913 temperature humidity sensor
  protocol -92  # FT-004-B Temperature Sensor
  protocol -93  # Ford Car Key
  protocol -94  # Philips outdoor temperature sensor (type AJ3650)
  protocol -96  # Nexa
  protocol -97  # ThermoPro TP08/TP12/TP20 thermometer
  protocol -98  # GE Color Effects
  protocol  99  # X10 Security
  protocol -100 # Interlogix GE UTC Security Devices
# protocol -101 # Dish remote 6.3
  protocol -102 # SimpliSafe Home Security System (May require disabling automatic gain for KeyPad decodes)
  protocol -103 # Sensible Living Mini-Plant Moisture Sensor
  protocol -104 # Wireless M-Bus, Mode C&T, 100kbps (-f 868.95M -s 1200k)
  protocol -105 # Wireless M-Bus, Mode S, 32.768kbps (-f 868.3M -s 1000k)
# protocol -106 # Wireless M-Bus, Mode R, 4.8kbps (-f 868.33M)
# protocol -107 # Wireless M-Bus, Mode F, 2.4kbps
  protocol -108 # Hyundai WS SENZOR Remote Temperature Sensor
  protocol -109 # WT0124 Pool Thermometer
  protocol -111 # Emos TTX201 Temperature Sensor
  protocol -112 # Ambient Weather TX-8300 Temperature/Humidity Sensor
  protocol -113 # Ambient Weather WH31E Thermo-Hygrometer Sensor, EcoWitt WH40 rain gauge
  protocol -114 # Maverick et73
  protocol -115 # Honeywell ActivLink, Wireless Doorbell
  protocol -116 # Honeywell ActivLink, Wireless Doorbell (FSK)
# protocol -117 # ESA1000 / ESA2000 Energy Monitor
# protocol -118 # Biltema rain gauge
  protocol -119 # Bresser Weather Center 5-in-1
  protocol -120 # Digitech XC-0324 / AmbientWeather FT005TH temp/hum sensor
  protocol -121 # Opus/Imagintronix XT300 Soil Moisture
# protocol -122 # FS20
  protocol -124 # LaCrosse/ELV/Conrad WS7000/WS2500 weather sensors
  protocol -125 # TS-FT002 Wireless Ultrasonic Tank Liquid Level Meter With Temperature Sensor
  protocol -126 # Companion WTR001 Temperature Sensor
  protocol -127 # Ecowitt Wireless Outdoor Thermometer WH53/WH0280/WH0281A
  protocol -128 # DirecTV RC66RX Remote Control
# protocol -129 # Eurochron temperature and humidity sensor
  protocol -130 # IKEA Sparsnas Energy Meter Monitor
  protocol -131 # Microchip HCS200/HCS300 KeeLoq Hopping Encoder based remotes
  protocol -132 # TFA Dostmann 30.3196 T/H outdoor sensor
  protocol -133 # Rubicson 48659 Thermometer
  protocol -134 # AOK Weather Station rebrand Holman Industries iWeather WS5029, Conrad AOK-5056, Optex 990018
  protocol -135 # Philips outdoor temperature sensor (type AJ7010)
  protocol -136 # ESIC EMT7110 power meter
  protocol -137 # Globaltronics QUIGG GT-TMBBQ-05
  protocol -138 # Globaltronics GT-WT-03 Sensor
  protocol -139 # Norgo NGE101
  protocol -141 # Auriol HG02832, HG05124A-DCF, Rubicson 48957 temperature/humidity sensor
  protocol -142 # Fine Offset Electronics/ECOWITT WH51, SwitchDoc Labs SM23 Soil Moisture Sensor
  protocol -143 # Holman Industries iWeather WS5029 weather station (older PWM)
  protocol -144 # TBH weather sensor
  protocol -145 # WS2032 weather station
  protocol -146 # Auriol AFW2A1 temperature/humidity sensor
  protocol -147 # TFA Drop Rain Gauge 30.3233.01
  protocol -148 # DSC Security Contact (WS4945)
  protocol -149 # ERT Standard Consumption Message (SCM)
# protocol 150 # Klimalogg
  protocol -151 # Visonic powercode
  protocol -152 # Eurochron EFTH-800 temperature and humidity sensor
  protocol -153 # Cotech 36-7959, SwitchDocLabs FT020T wireless weather station with USB
  protocol -154 # Standard Consumption Message Plus (SCMplus)
  protocol -155 # Fine Offset Electronics WH1080/WH3080 Weather Station (FSK)
  protocol -157 # Missil ML0757 weather station
  protocol -158 # Sharp SPC775 weather station
  protocol -159 # Insteon
  protocol -160 # ERT Interval Data Message (IDM)
  protocol -161 # ERT Interval Data Message (IDM) for Net Meters
# protocol -162 # ThermoPro-TX2 temperature sensor
  protocol -163 # Acurite 590TX Temperature with optional Humidity
  protocol -164 # Security+ 2.0 (Keyfob)
  protocol -165 # TFA Dostmann 30.3221.02 T/H Outdoor Sensor
  protocol -166 # LaCrosse Technology View LTV-WSDTH01 Breeze Pro Wind Sensor
  protocol -167 # Somfy RTS
# protocol -169 # Nice Flor-s remote control for gates
  protocol -170 # LaCrosse Technology View LTV-WR1 Multi Sensor
  protocol -171 # LaCrosse Technology View LTV-TH Thermo/Hygro Sensor
  protocol -172 # Bresser Weather Center 6-in-1, 7-in-1 indoor, soil, new 5-in-1, 3-in-1 wind gauge, Froggit WH6000, Ventus C8488A
  protocol -173 # Bresser Weather Center 7-in-1
  protocol -174 # EcoDHOME Smart Socket and MCEE Solar monitor
  protocol -175 # LaCrosse Technology View LTV-R1, LTV-R3 Rainfall Gauge, LTV-W1/W2 Wind Sensor
  protocol -176 # BlueLine Innovations Power Cost Monitor
  protocol -177 # Burnhard BBQ thermometer
  protocol -178 # Security+ (Keyfob)
  protocol -179 # Cavius smoke, heat and water detector
  protocol -181 # Amazon Basics Meat Thermometer
  protocol -182 # TFA Marbella Pool Thermometer
  protocol -183 # Auriol AHFL temperature/humidity sensor
  protocol -184 # Auriol AFT 77 B2 temperature sensor
  protocol -185 # Honeywell CM921 Wireless Programmable Room Thermostat
  protocol -187 # RojaFlex shutter and remote devices
  protocol -188 # Marlec Solar iBoost+ sensors
  protocol -189 # Somfy io-homecontrol
  protocol -190 # Ambient Weather WH31L (FineOffset WH57) Lightning-Strike sensor
  protocol -191 # Markisol, E-Motion, BOFU, Rollerhouse, BF-30x, BF-415 curtain remote
  protocol -192 # Govee Water Leak Detector H5054, Door Contact Sensor B5023
  protocol -193 # Clipsal CMR113 Cent-a-meter power meter
  protocol -194 # Inkbird ITH-20R temperature humidity sensor
  protocol -195 # RainPoint soil temperature and moisture sensor
  protocol -196 # Atech-WS308 temperature sensor
  protocol -197 # Acurite Grill/Meat Thermometer 01185M
# protocol -198 # EnOcean ERP1
  protocol -199 # Linear Megacode Garage/Gate Remotes
# protocol -200 # Auriol 4-LD5661/4-LD5972/4-LD6313 temperature/rain sensors
  protocol -202 # Funkbus / Instafunk (Berker, Gira, Jung)
  protocol -204 # Jasco/GE Choice Alert Security Devices
  protocol -205 # Telldus weather station FT0385R sensors
  protocol -206 # LaCrosse TX34-IT rain gauge
  protocol -207 # SmartFire Proflame 2 remote control
  protocol -209 # SimpliSafe Gen 3 Home Security System
  protocol -210 # Yale HSA (Home Security Alarm), YES-Alarmkit
  protocol -211 # Regency Ceiling Fan Remote (-f 303.75M to 303.96M)
  protocol -213 # Fine Offset Electronics WS80 weather station
  protocol -214 # EMOS E6016 weatherstation with DCF77
  protocol -215 # Emax W6, rebrand Altronics x7063/4, Optex 990040/50/51, Orium 13093/13123, Infactory FWS-1200, Newentor Q9, Otio 810025, Protmex PT3390A, Jula Marquant 014331/32, Weather Station or temperature/humidity sensor
# protocol -216 # ANT and ANT+ devices
  protocol -217 # EMOS E6016 rain gauge
  protocol -218 # Microchip HCS200/HCS300 KeeLoq Hopping Encoder based remotes (FSK)
  protocol -219 # Fine Offset Electronics WH45 air quality sensor
  protocol -220 # Maverick XR-30 BBQ Sensor
  protocol 221 # Fine Offset Electronics WN34 temperature sensor
  protocol -222 # Rubicson Pool Thermometer 48942
  protocol -223 # Badger ORION water meter, 100kbps (-f 916.45M -s 1200k)
  protocol -224 # GEO minim+ energy monitor
  protocol -227 # SRSmith Pool Light Remote Control SRS-2C-TX (-f 915M)
  protocol -228 # Neptune R900 flow meters
# protocol -229 # WEC-2103 temperature/humidity sensor
  protocol -230 # Vauno EN8822C
  protocol -231 # Govee Water Leak Detector H5054
  protocol -232 # TFA Dostmann 14.1504.V2 Radio-controlled grill and meat thermometer
# protocol -233 # CED7000 Shot Timer
  protocol -234 # Watchman Sonic Advanced / Plus
  protocol -235 # Oil Ultrasonic SMART FSK
  protocol -236 # Gasmate BA1008 meat thermometer
  protocol -237 # Flowis flow meters
  protocol -238 # Wireless M-Bus, Mode T, 32.768kbps (-f 868.3M -s 1000k)
  protocol -239 # Revolt NC-5642 Energy Meter
  protocol -240 # LaCrosse TX31U-IT, The Weather Channel WS-1910TWC-IT
  protocol  241 # EezTire E618 (TPMS10ATC)
# protocol -242 # Baldr / RainPoint rain gauge.
  protocol -243 # Celsia CZC1 Thermostat
  protocol 244 # Fine Offset Electronics WS90 weather station
# protocol -245 # ThermoPro TX-2C Thermometer
  protocol 246 # TFA 30.3151 Weather Station
  protocol 247 # Bresser water leakage

## TPMS Sensor Disabled by default, I don't think you want to enable this.
  protocol -59 # Steelmate TPMS
  protocol -60 # Schrader TPMS
  protocol -82 # Citroen TPMS
  protocol -88 # Toyota TPMS
  protocol -89 # Ford TPMS
  protocol 212 # Renault 0435R TPMS
  protocol -90 # Renault TPMS
  protocol -95 # Schrader TPMS EG53MA4, PA66GF35
  protocol -110 # PMV-107J (Toyota) TPMS
  protocol -123 # Jansite TPMS Model TY02S
  protocol -140 # Elantra2012 TPMS
  protocol -156 # Abarth 124 Spider TPMS
  protocol -168 # Schrader TPMS SMD3MA4 (Subaru)
  protocol -180 # Jansite TPMS Model Solar
  protocol -186 # Hyundai TPMS (VDO)
  protocol -201 # Unbranded SolarTPMS for trucks
  protocol -203 #Porsche Boxster/Cayman TPMS
  protocol -226 # Kia TPMS (-s 1000k)
  protocol -225 # TyreGuard 400 TPMS
  protocol 208 # AVE TPMS

  ## Flex devices (command line option "-X")

# Some general decoder definitions for various devices, enable as needed.
#
# For details about decoder definition run "rtl_433 -X help"
#

# If you enable these decoders you'll likely want to add ",match=<YOUR-DEVICE-ID>"

# Elro DB270 - wireless doorbell
#
# Device information and test files:
# https://github.com/merbanan/rtl_433_tests/tree/master/tests/elro/db270/01
#
# Output sample:
# {"time" : "2018-02-14 19:11:16", "model" : "Elro_DB270", "count" : 4, "num_rows" : 4,
#  "rows" : [{"len" : 25, "data" : "ebeaaa8"}, {"len" : 25, "data" : "ebeaaa8"},
#            {"len" : 25, "data" : "ebeaaa8"}, {"len" : 25, "data" : "ebeaaa8"}]}
#
#decoder n=Elro_DB270,m=OOK_PWM,s=300,l=930,r=11000,g=1500,repeats>=4,bits=25

# Euroster 3000TX - programmable room thermostat
#
# Device information and test files:
# https://github.com/merbanan/rtl_433_tests/tree/master/tests/euroster/3000tx/01
#
# Output sample:
# {"time" : "2018-02-14 19:20:20", "model" : "Euroster_3000TX", "count" : 1, "num_rows" : 1,
#  "rows" : [{"len" : 32, "data" : "41150515"}]}
#
#decoder n=Euroster_3000TX,m=OOK_MC_ZEROBIT,s=1000,r=4800,bits=32

# Byron BY series door bell
#
# Device information and test files:
# https://github.com/merbanan/rtl_433_tests/tree/master/tests/Byron-BY101 and Byron-BY34
#
# Output sample:
# {"time" : "@1.572864s", "model" : "doorbell#1", "count" : 25, "num_rows" : 25, "rows" : [{"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}, {"len" : 21, "data" : "e768c8"}]}
#decoder n=Byron_BY_Doorbell,m=OOK_PWM,s=500,l=1000,r=3300,g=1200,repeats>=4,bits=21,match={2}0x3

# Kerui alarm system (PIR and door sensors)
#  short is 333 us
#  long is 972 us
#  packet gap 11000 us
#decoder n=Kerui,m=OOK_PWM,s=333,l=972,r=11000,g=1100,bits=25,invert,get={20}:state,get=@20:{4}:event:[10:pir 14:open 7:close 11:tamper 15:battery_low]

# Golden Security GS-WDS07 door and window sensor
#  short is 476 us + 1344 us
#  long is 1364 us + 448 us
#  packet gap 13972 us
#decoder n=gswds07,m=OOK_PWM,s=476,l=1364,r=15000,g=1600,bits>=24,bits<=25,invert

# Generic SCV2260 4-button remote (see rtl_433_tests/tests/generic_remote/01)
#  short is 472 us + 1412 us
#  long is 1428 us + 472 us
#decoder n=generic_remote_01,m=OOK_PWM,s=472,l=1428,r=1800,g=1600,bits=25,invert,match=13cd,get=@16:{8}:event:[192:arm 12:disarm 3:home 48:sos]

# Generic PT2260 PIR (see rtl_433_tests/tests/PT2262/01)
#  short is 440 us + 1536 us
#  long is 1428 us + 548 us
#  packet gap 15348 us
#decoder n=pt2260_pir,m=OOK_PWM,s=440,l=1428,r=16000,g=1700,bits=25,invert,match=755555,countonly

[catduckgnaf]

@billchurch sorry about that, tiny typo. I am pushing an update now

[billchurch]

@catduckgnaf Standing by!!! :)

[billchurch]

Updated to 2024.2.3...

Starts but it doesn't seem like it's taking my custom config I have. I added a username for the output mqtt://... connect string but it doesn't seem to be working...

I have a config in specified in /config/rtl_433/rtl_433.conf

Thoughts here?

[billchurch]

I can open a separate issue but this is what I'm seeing:

I have this:

A lot of this:

[MQTT] MQTT Connection error: 5
MQTT: MQTT Connection error: 5
[MQTT] MQTT Connection lost, reconnecting...
MQTT: MQTT Connection lost, reconnecting...
[MQTT] MQTT Connection error: 5
MQTT: MQTT Connection error: 5
[MQTT] MQTT Connection lost, reconnecting...
MQTT: MQTT Connection lost, reconnecting...

and in mosquitto:

2024-02-03 11:08:57: Client rtl_433-581affffd0e0 disconnected, not authorised.
2024-02-03 11:08:57: New connection from 172.30.33.2:35566 on port 1883.
2024-02-03 11:08:57: Client rtl_433-581affffd0e0 disconnected, not authorised.
2024-02-03 11:08:57: New connection from 172.30.33.2:35570 on port 1883.
2024-02-03 11:08:57: Client rtl_433-581affffd0e0 disconnected, not authorised.
2024-02-03 11:08:57: New connection from 172.30.33.2:35572 on port 1883.
2024-02-03 11:08:57: Client rtl_433-581affffd0e0 disconnected, not authorised.

[catduckgnaf]

No need, not a bug with container. You need to remove the quotes. I updated my template config with some better documentation https://github.com/catduckgnaf/rtl_433_ha/blob/main/config/rtl_433_catduck_template.conf

However that better example should solve things for you

[billchurch]

That got it, nice work. Going to be playing with this some more and will open PRs on docs or whatever I can help with. This is a new installation so I have some freedom to mess around and what not. Thanks for taking this over and feel free to @ me if you need help with anything.

[catduckgnaf]

Please feel free to try our discord!

A great PR on a doc would be a complete getting started guide, including buying a dongle etc.

Feel free to join our lonely discord! https://discord.gg/yQg7JTCx