Open azazul1980 opened 1 year ago
Hello,
I have exactly the same question. Same hardwar: go-eCharger V3 @Firmware 055.0
When I set the charge Limit in Home Assistant I can see the settings in the Charger using Postman GET http://<ip>/status
in the key dwo
.
It seems as if the parameter is correctly transmitted to the charger. Is it possible that the hardware version V3 does not use the parameter at all?
Do we need to use API v2?
This integration uses an library for APIv1. Some things are the same across versions but others might have changed. For the dwo
key it seems that APIv1 expected the limit as 0.1kWh whilst APIv2 expects it as Wh.
I have the same problem. Until now I take a bypass via rest_command, but its not sufficent :-(
Hello,
if I set the charge Limit in Home Assistant there is no change in the app of the wallbox. Is this function work on FW 055.0 go-eCharger V3.