search

cbepx-me / Anbernic-H700-RG-xx-StockOS-Modification

Anbernic H700 Stock OS Modification
https://drive.google.com/drive/folders/1uwCkGX3H-K09pj0VbB6hkS8I0_qhzrGY?usp=sharing
308 stars 5 forks source link

NTP and SSH functionality? #18

Closed seth-rasmussen closed 2 months ago

seth-rasmussen commented 6 months ago

No documentation or instructions on enabling (disabled by default according to docs) the ssh or ntp functions in this OS... Been through multiple menus and options and can not find where or how to turn on.

SneakyTwitch commented 6 months ago

seems like you didnt go through enough menus then. It is located in RA> Apps . Find it in the TF card you install the OS in.

the script name

  1. Network_Time_protocol-(on/off)
  2. SSH_Server-(on/off)
seth-rasmussen commented 6 months ago

Nope tried there too and this is all I have in that menu: IMG_0097

seth-rasmussen commented 6 months ago

For reference, everything should have installed correctly. Downloaded from here: https://drive.google.com/drive/folders/1uwCkGX3H-K09pj0VbB6hkS8I0_qhzrGY?usp=sharing Then unzipped, went to RG35XXPLUS&_RG35XX_2024 >Stock_OS_MOD>OS_Image and unzipped the image there. I then flashed it using Balena plugged it in tf1 put a new card in tf2 and powered on. Firmware version is showing: RG35xx+_P_2-240409

SneakyTwitch commented 6 months ago

https://drive.google.com/file/d/1PxOsCLlDlntxEuizJ5zbwJ6emqh2J75b/view?usp=sharing

Here you go. These are pulled from my 35xxH . You can try.

Anyways, after first bootup from TF1 OS installation. Take out SDcard, create partition for the TF1 rightmost space. Put Sdcard back, it should now install APPs content, takes around 1min+ . Do not reset or power off when the installation or upgrade is happening

ahmed2m commented 6 months ago

Then unzipped, went to RG35XXPLUS&_RG35XX_2024 >Stock_OS_MOD>OS_Image and unzipped the image there. I then flashed it using Balena plugged it in tf1 put a new card in tf2 and powered on. Firmware version is showing: RG35xx+_P_2-240409

Happened to me as well on my xxH. I did exactly like you, maybe the problem, for some reason, is booting the first time with both tf1, tf2 on? I will try again later if I have time.

SneakyTwitch commented 6 months ago

For first time boot, clean setup, just use TF1 only. After 1st installation, if there are nothing in the Apps section. Use Tripartition wizard, you can expand the rightmost TF1 space into Fat32, name it ROMS. It works in any size SDCard. Put it back , turn it on, and let it copy the files (Apps and others) over to TF1

Afterwards. you can plug in any Fat32 TF2, and it will setup the required directory folders (Roms and others) Unplug TF2, and transfer your games in.

ahmed2m commented 6 months ago

Okay so the expanding is the missing step? I had the idea that (automatically created) roms parition expansion step is optional.

Btw I see "copying files..." on every boot, is that also related to the whole thing? Or is that normal.

SneakyTwitch commented 6 months ago

If its "copying files..." on every boot, It usually only happen on the 1st two boots (Tf1, and Tf1 after expanding) might means that there is issue in copying the files over. You might want to re-flash the sdcard.

ahmed2m commented 6 months ago

Done that and everything worked great, however I also did as #6 said, apparently flashing using balena etcher on MacOS doesn't format the card as GUID so the partitioning was just messed up. I removed the dust off my windows laptop and did everything on Rufus.

cbepx-me commented 6 months ago

Judging from the current feedback, this problem occurs because of the use of balena flash tf1 on macos. Please use rufus under windows to complete the operation.

Skeeve commented 5 months ago

Judging from the current feedback, this problem occurs because of the use of balena flash tf1 on macos. Please use rufus under windows to complete the operation.

For me dd worked fine on Mac. I have no WinDOS.