Currently, the only way to accurately know your chosen sensors are active, is to select:
Settings => Probe Configuration => My Sensor => Verify Enable Probe is Checked. When many sensors are involved, this can be quite cumbersome and tedious to complete.
Adding a sensor overview would be helpful for clinicians in particular, to quickly see what's switched on or off, without having to get into the gritty details associated with sensor configuration, such as noise configuration. Every available sensor should appear on this list, together with text or an image(e.g. traffic light style) describing state.
One place this could go is as a button to the left of the email icon, currently found on the Diagnostics screen in PR 1.2.1. There is also potential to add this to the main screen.
Currently, the only way to accurately know your chosen sensors are active, is to select: Settings => Probe Configuration => My Sensor => Verify Enable Probe is Checked. When many sensors are involved, this can be quite cumbersome and tedious to complete.
Adding a sensor overview would be helpful for clinicians in particular, to quickly see what's switched on or off, without having to get into the gritty details associated with sensor configuration, such as noise configuration. Every available sensor should appear on this list, together with text or an image(e.g. traffic light style) describing state.
One place this could go is as a button to the left of the email icon, currently found on the Diagnostics screen in PR 1.2.1. There is also potential to add this to the main screen.