Closed GoogleCodeExporter closed 8 years ago
I built already a new alpha version with IT8728F support, but don't have any
feedback yet. The new version:
http://openhardwaremonitor.org/openhardwaremonitor-v0.3.0.2-alpha.zip
Can you test if this gives you some temperatures and fan readings (and hidden
voltages)?
I can try to identify the temperature, fan and voltage readings correctly for
your mainboard if you provide me the following:
- Let your PC run idle. Start the OHM and save a
OpenHardwareMonitor.Report.txt. Close the OHM and start GigaByte EasyTune 6.
Make screenshots that show all available readings (voltages, temps, fans).
Close GigaByte EasyTune.
- Stress you PC (e.g. with Prime95). Start the OHM and save a
OpenHardwareMonitor.Report.txt. Close the OHM and start GigaByte EasyTune. Make
screenshots that show all available readings. Close GigaByte EasyTune.
Make sure not to run the GigaByte EasyTune and the OHM at the same time, as
both might disturb each other. If you have additional fans at hand, it could be
useful to connect them to the mainboard to identify the fan channels as well.
Original comment by moel.mich
on 2 May 2011 at 6:32
Sorry, the above URL is wrong (file not found), the correct one is:
http://openhardwaremonitor.org/files/openhardwaremonitor-v0.3.0.2-alpha.zip
Original comment by moel.mich
on 2 May 2011 at 8:05
Thanks for the quick respond
I tried the alpha version
its only reads Vbat from Voltages. Also reads Temps + Fans
Here are the reports and easytune screenshots
Thanks
Original comment by marccosd@gmail.com
on 2 May 2011 at 8:46
Attachments:
I have built a new version with a mainboard specific configuration for the
Gigabyte P67A-UD4-B3.
http://openhardwaremonitor.org/files/openhardwaremonitor-v0.3.0.3-alpha.zip
Can you check if everything is correct now?
Original comment by moel.mich
on 3 May 2011 at 6:22
Thanks, everything seems correct now
Here is the report
Original comment by marccosd@gmail.com
on 3 May 2011 at 8:50
Attachments:
Thank you for testing.
Original comment by moel.mich
on 3 May 2011 at 9:07
Original issue reported on code.google.com by
marccosd@gmail.com
on 2 May 2011 at 3:25Attachments: