Closed GoogleCodeExporter closed 8 years ago
Could you enabled the log file to detailled level ?
Log.txt is written in /var/mobile/Library/Siphon.
Post the log.txt here or send me the file.
You can read it too, perhaps your sip provider doesn't support g722. What is
your SIP
provider ?
Original comment by samuelv0...@gmail.com
on 4 Sep 2009 at 5:11
Will provide log.txt on Tues but should be repeatable. No SIP provider, dialing
straight IP address via URL field in contacts. With G.711 enabled, call
completes fine.
Original comment by hartnett...@gmail.com
on 6 Sep 2009 at 4:46
Log.txt for outgoing G.722 only call
Original comment by hartnett...@gmail.com
on 9 Sep 2009 at 3:28
Attachments:
Here's a log for an outgoing call using Gizmo5 (advertises as G.722 capable) to
a
Polycom G.722 phone...call ends as soon as it's answered on the Polycom
Original comment by hartnett...@gmail.com
on 9 Sep 2009 at 5:02
Attachments:
I also cannot connect to a iPhone running Siphon with G.722, even on Networks
capable of allowing G.722, which
I testet with other Phones (Telekom branded Siemens Gigaset).
It seems to me, that Siphon just says bye, when it should start the media-stream
a=rtpmap:9 G722/8000
independend if calling or called and indepentend if the other phone ist also
Siphon or another.
Do You need more information ?
Original comment by Stefan61...@googlemail.com
on 21 Sep 2009 at 8:54
I'd like to add that the issue of G.722 being broken has been up before.
And as far as i know it has never worked or been fixed?
I run the software against Asterisk 1.6.1.6, and while G.722 works with other
phones, the call from this app just
gets disconnected.
It does work with other codecs like G.711a.
Original comment by xert...@gmail.com
on 23 Sep 2009 at 5:13
g722 uses 16kHz. And for the moment Siphon just works on 8kHz, if I add resample
step, the CPU activities is stronger and you can't use g722 :-(
So it's need to disable resample step.
Original comment by samuelv0...@gmail.com
on 11 Oct 2009 at 9:15
Does the sdk allow you to change the native sample rate to 16khz?
Original comment by hartnett...@gmail.com
on 13 Oct 2009 at 3:29
Original comment by samuelv0...@gmail.com
on 7 Nov 2009 at 11:51
Original issue reported on code.google.com by
hartnett...@gmail.com
on 4 Sep 2009 at 3:19