Holes in Point cloud and mesh using PolyCam export

[trvawgagne]

I'm following the Polycam example and am using an export of a stairwell room. After running the interface and Densify point clound, i still seem to be missing a lot of points. this is causing the meshes and textures to be incomplete compared to that of Polycam. Thisis the case for a few other scans i've run.

Could you help me understand what steps i can take to fill in more points and get us closer to the polycam result?

I've tried:

• increasing and decreasing --number-views
• using and not using --max-resolution
• with and without --tower-mode as well as different tower mode flags
• running DensifyPointCloud multiple times

Sample Dataset is here on GDrive - stairwell-poly.zip. Inside it there is a folder called working/job which has the logs and all the work done for the particular scan shown below.

Here is the GLB file exported from polycam to show the result (We will be doing obj, but gltb is free:) )

Command flow i typically use

InterfacePolycam -i keyframes
DensifyPointCloud -i scene.mvs -o 02_dense_scene.mvs --resolution-level 0 --max-resolution 256 --tower-mode 0 --number-views 32
ReconstructMesh -i 02_dense_scene.mvs -o 03_reconstruct_mesh.mvs
RefineMesh -i 03_reconstruct_mesh.mvs -o 04_refine_mesh.mvs
TextureMesh -i 04_refine_mesh.mvs -o 05_textured_mesh.mvs
TransformScene -i 05_textured_mesh.mvs -o 06_transformed_mesh.mvs --export-type obj --transfer-texture-file 05_textured_mesh.ply

Although this is the full flow, my assumption is the issue is closer to the DensifyPointCloud and i am missing a flag or additional workflow?

Comparison This is a comparison of what openmvs produces to polycam when using the pipeline above...

Please let me know if i should try something different or if something stands out so that we can get closer to the Polycam result.

Thanks!

[trv-awgagne]

Yesterday I attempted to rerun the DensifyPointCloud and included --postprocess-dmaps 2. As i ran it over and over, more points were added to the point cloud, but only in the same areas shown above in the original image. i went from 42K points oto 56K points, and in the PLY file, no point goes farther than the original bounds of the image above.

DensifyPointCloud -i scene.mvs -o 02_dense_scene.mvs --resolution-level 0 --max-resolution 256 --tower-mode 0 --postprocess-dmaps 2

Other things I've tried:

• --iters 1000 - I didnt see any difference
• DensifyPointCloud scene.mvs --fusion-mode -1 && DensifyPointCloud scene.mvs --fusion-mode -2 to match that of the documentation, This was a failed test as the point cloud was scattered
• --number-views 0 - the point cloud point count was less than the original
• --postprocess-dmaps 4 - no change
• --crop-to-roi 0 - no change

[cdcseacave]

I've looked at the dataset and I think the problem here is the camera poses. The raw version are too noisy, while the corrected ones are wrong. So in order to improve this dense reconstruction you need first to estimate correct poses. Try COLMAP or OpenMVG, however the images and the acquisition pattern are very difficult, so I do not have high hopes. Try capturing better photos appropriate for photogrammetry (tons of tutorials online)