Closed pdandis closed 8 years ago
Maybe this is not the best place to ask questions, openhab has a forum for that: https://community.openhab.org/ But anyway, I also have this sensor and was able to include it by clicking the BACK button three times (not the button in the battery case). Good luck.
Agreed - it#s probably best to discuss this on the forum. I know from personal experience that these sensors are not the easiest to include but they do work fine once you finally get it included.
Hi, thx for your hints, by the way the tried it with the BACK Button and the internal tmp button, same result .. I will put my question in the openhab forum .
From my experience, getting this included was a pain. I tried many times and finally it worked, but it's not obvious why it didn't work the other times...
Good luck.
Hi,
first of all I'm a new in this area. I installed openhab on a raspi PI, according apt-get and HABmin1. I'm using a AEOTEC Gen5 Stick it seems all is fine. HABmin shows the stick a node1 Zwave USB controller, light is green.
------------Number of Nodes Found Registered to ZWave Controller-------
- # Nodes = 1
So my next step was to insert the fibaro FGK-101 Door / Windows opener by tripple clicking. I have 3 ones but all inserting tries failed. Reset doesn't helped sudo /etc/init.d/openhab status -l shows at the end of the output: Node 1: Neighbor update failed several times and Node 255: Timeout while sending message Requiring 2 attempts.
During startup the only error message ist software reset is false?
I'm no idea whats wrong? Any ideas what I can do?
Many thx in advance
Peter