Renualt Talisman, How to activate the high beam function with Pure Vision LED headlamps?

[nyaben]

Hello, everybody. the Pure Vision, LED head lamps is an optional thing in Korea. I bought and installed the Pure Vision secondhand recently, but the high beam function is not working properly. High beam can only be turned on when the low beam is turned on.

can anyone suggest me a solution? thank you.

P.S. Also I'm looking for a way to activate Auto Height Leveling function for headlamps.

[shrlnm]

@nyaben Hello, what is your vin and donors vin number

[nyaben]

@nyaben Hello, what is your vin and donors vin number

Geez, do I need both of information? ofcourse, it's super easy to check my VIN but the donor's one? that is not possible in my situation. I bought the Pure Visions from local auto repair shop and I'm pretty sure they are not tracking the number.

[AndyIreland]

On my Clio 4 with DDT4all I changed this parameter : either Dual_bulbs or Bi_Function you have to adjust the option to '0' or '1' accordingly . then when you push your hi beam stalk on the steering wheel the low beam light will extinguish and the high beam only will be lit. pull the hi beam stalk and the high beam lamp extinguishes and low beam lamp will come on . - change the parameter again and you can make it so hi beam lamp comes on along with the dipped beam lamps at the same time

[shrlnm]

but the donor's one?

Ok. Your vin only maybe enough

[shrlnm]

I've just checked. It's about 50 different parameters for random VIN number between LAHALO and LEDH2. Talisman also may have LEDH3. It is why I asked about donors vin.

[nyaben]

On my Clio 4 with DDT4all I changed this parameter : either Dual_bulbs or Bi_Function you have to adjust the option to '0' or '1' accordingly . then when you push your hi beam stalk on the steering wheel the low beam light will extinguish and the high beam only will be lit. pull the hi beam stalk and the high beam lamp extinguishes and low beam lamp will come on . - change the parameter again and you can make it so hi beam lamp comes on along with the dipped beam lamps at the same time

You have my thanks. I could reach to the address according to the screenshot you attached and change several options from Halogen to LED. it was not the solution but I could solve a little problem that I didn't mention. Anyway, there were some options about high beam function on the list but for some reason I couldn't make change the value for them. Weird.. They were commonly written as 'NO DATA' in red blanks. Any idea of them?

[nyaben]

I've just checked. It's about 50 different parameters for random VIN number between LAHALO and LEDH2. Talisman also may have LEDH3. It is why I asked about donors vin.

Whooah 50, that's huge number. That must mean I gotta try something in 50 different way, right? If you're going to tell me how, I will try surely. Thank you for giving me hints.

[shrlnm]

@nyaben it means that you have to change about 50 parameters in the USM for tune it for working with LED head light.

The parameters below are for tune random Talisman, originally made with halogen lamps, to work with LED type 2.

These parameters from USM_CMF1_SED_C1_2_170316_20170317T113830.xml

---

--< LEDH2 --> LAHALO

---

E_U_LowBeamRightOffset --< 0x00 --> 0x28

E_B_Hbeam_OC_Inhibition --< 0x01 --> 0x00

E_Pct_MAN_SWI_INDEX_TAB_3 --< 0x00 --> 0x6e

E_Pct_MAN_SWI_INDEX_TAB_2 --< 0x00 --> 0x43

E_Pct_MAN_SWI_INDEX_TAB_1 --< 0x00 --> 0x14

E_Pct_MAN_SWI_INDEX_TAB_5 --< 0x00 --> 0xca

E_Pct_MAN_SWI_INDEX_TAB_4 --< 0x00 --> 0xa0

E_B_Cornering_Inhibition --< 0x00 --> 0x01

E_B_LowBeamWithoutPWM_sty_inv --< 0x00 --> 0x01

dtc_INH_O_LIGHT_HBEAM_LH_SCS_OC --< 0x01 --> 0x00

E_K_MAN_SWI_FIL_COEF --< 0x00 --> 0xce

E_Pct_NOM_PWM_OFS --< 0x1fd6 --> 0x0feb

E_B_LowBeamWithoutPWM --< 0x01 --> 0x00

dtc_INH_O_LIGHT_LBEAM_RH_OC --< 0x01 --> 0x00

E_B_HighBeamWithoutPWM --< 0x01 --> 0x00

E_E_LVL_CFG --< 0x01 --> 0x03

dtc_INH_LI_LED_1_Failure --< 0x00 --> 0x01

E1d_HighBeam_Law_Y 1 --< 0x5a --> 0x51

E1d_HighBeam_Law_Y 3 --< 0x4b --> 0x44

E1d_HighBeam_Law_Y 2 --< 0x52 --> 0x44

E1d_LowBeam_Law_Y 2 --< 0x52 --> 0x44

E1d_LowBeam_Law_Y 3 --< 0x4b --> 0x44

E1d_LowBeam_Law_Y 1 --< 0x5a --> 0x51

dtc_INH_O_LIGHT_LBEAM_RH_SCS_OC --< 0x01 --> 0x00

E_E_LowBeamType --< 0x01 --> 0x00

E_U_MinimumVoltageByLight --< 0x78 --> 0x88

E_B_PassingInhibition --< 0x01 --> 0x00

E_Pct_MAN_SWI_INDEX_BAND --< 0x00 --> 0x0f

E_U_HighBeamRightOffset --< 0x00 --> 0x50

E_Pct_RR_SSR_INIT_RGE_L --< 0x42 --> 0x26

dtc_INH_O_LIGHT_HBEAM_RH_SCS_OC --< 0x01 --> 0x00

E_U_MAN_SWI_DIAG_ELEC_SCP --< 0x0000 --> 0x782a

E_U_MAN_SWI_DIAG_ELEC_SCG --< 0x0000 --> 0x0225

E_U_HighBeamLeftOffset --< 0x00 --> 0x28

dtc_INH_O_LIGHT_LBEAM_LH_OC --< 0x01 --> 0x00

dtc_INH_O_LIGHT_HBEAM_RH_OC --< 0x01 --> 0x00

dtc_INH_O_LIGHT_LBEAM_LH_SCS_OC --< 0x01 --> 0x00

E_U_LowBeamLeftOffset --< 0x00 --> 0x14

E_FT_SSR_ATT_COEF --< 0xdaef --> 0x0000

dtc_INH_LI_LED_2_Failure --< 0x00 --> 0x01

E_D_WHEEL_HDLMP_DIST --< 0x59 --> 0x60

E_E_HighBeamType --< 0x01 --> 0x00

dtc_INH_O_LIGHT_HBEAM_LH_OC --< 0x01 --> 0x00

dtc_INH_Levellizer_Sensor_Initialisation --< 0x00 --> 0x01

E_Ts_MAN_SWI_INDEX_TIM --< 0x00 --> 0x08

E_K_Cor_Dimming_step_nb --< 0x0f --> 0x05

E_RR_SSR_ATT_COEF --< 0xc290 --> 0x0000

[nyaben]

@nyaben it means that you have to change about 50 parameters in the USM for tune it for working with LED head light. The parameters below are for tune random Talisman, originally made with halogen lamps, to work with LED type 2. These parameters from USM_CMF1_SED_C1_2_170316_20170317T113830.xml

Big thanks, shrlnm!I truly appreciate it. but maybe I'm too amateurish to understand your writing. I could find some items above from the DDT4all program like 'E_E_LowBeamType', but not for some like 'dtc_INH_O_LIGHT_LBEAM_RH_SCS_OC'. and all the values you told me starting with '0X..'.. getting confused.

[shrlnm]

Yes, it may be a bit confusing. It is better to do such things automatically. I asked your vin not out of curiosity. I may do a pyren macro for you witch may change all of these parameters. You may give me your email if you don't want to show your vin in public.

[Banana009]

I also plan to replace classic halogen lights with Pure Vision LED headlamps on my Grand Scenic IV. I'm a little confused about this discussion, can you advise me what all the parameters need to be change? Is it necessary to change cabling during installation? Thanks for all the advice.