search

centerclick / feedback

Issues, Bug Reports, and Feature Requests
7 stars 0 forks source link

NTP250 quit working #45

Closed J5thwheel closed 2 years ago

J5thwheel commented 2 years ago

My new NTP250 server has died. It worked fine for the first few days before I powered it and the network down. Until I shut it down, I was able to access its internal webpage with no problem. It was returning time to the Win10 computer and a surveillance camera on this network. A day later I restarted the network and the NTP250 no longer functions. Now, the power indicator illuminates, the SYS indicator starts flashing (50% duty cycle) after a few seconds. The PPS indicator starts flashing after a few minutes. The NTP indicator doesn't illuminate. That’s the way it sets for as long as it’s powered up. Other items: • The firewall log shows it is getting a DHCP assignment of its pinned IP address when it powers up. • It does respond to ping requests on that IP address. • It does not respond to web browser requests. • When pushing the CMD button there is no indication that the button does anything. I had not pushed that button when it was working. • I have attempted to set up the USB console with no luck. When looking at the Device Manager, there is no indication that it is connected.

John Corstvet john@corstvet.com +16088524887

dave4445 commented 2 years ago

John, did my email replies go to your spam folder? I suspect you may have a corrupt SD card given its not booting. I can send you a known good image to reimage it with.

dave4445 commented 2 years ago

Reimaged, resolved