cerebrux / inxi

Automatically exported from code.google.com/p/inxi
0 stars 0 forks source link

Weird characters in the Machine/System output #68

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
What steps will reproduce the problem?
1. inxi -v7

What is the expected output? What do you see instead?

Machine:   System: �<^�43/�x�"���
                                 5`U��{Њ6�� product: ����NzM�W�B������Qw���ATT� version: =�s�G�|�WfO�p��
                                                                                                         ��-� serial: ��[��
��)�G{i�c� ��ɰ?i
                � =M

           Mobo: N/A model: ��o? ��=�|�= version: /�> serial: ��=XJ
>��=��o? ��=�|�=�o?
           Bios: Intel version: CR94510J.15A.1015.2007.0712.1513 date: 07/12/2007
           Chassis: ��=TJ
> ��> ��> type: 0 version: Og? serial: ��=�|�=

What version of the product are you using? On what operating system? debian 6

Please paste your inxi output below.

System:    Host: anvil Kernel: 3.13.0-24-generic i686 (32 bit, gcc: 4.8.2) 
Console: tty 4 Distro: Ubuntu 14.04 trusty
Machine:   System: �<^�43/�x�"���
                                 5`U��{Њ6�� product: ����NzM�W�B������Qw���ATT� version: =�s�G�|�WfO�p��
                                                                                                         ��-� serial: ��[��
��)�G{i�c� ��ɰ?i
                � =M

           Mobo: N/A model: ��o? ��=�|�= version: /�> serial: ��=XJ
>��=��o? ��=�|�=�o?
           Bios: Intel version: CR94510J.15A.1015.2007.0712.1513 date: 07/12/2007
           Chassis: ��=TJ
> ��> ��> type: 0 version: Og? serial: ��=�|�=
CPU:       Dual core Intel Pentium Dual CPU E2160 (-MCP-) cache: 1024 KB flags: 
(lm nx pae sse sse2 sse3 ssse3) bmips: 7181.92
           Clock Speeds: 1: 1795.483 MHz 2: 1795.483 MHz
Graphics:  Card: Intel 82945G/GZ Integrated Graphics Controller bus-ID: 00:02.0 
chip-ID: 8086:2772
           X-Vendor: N/A driver: N/A tty size: 173x59 Advanced Data: N/A for root out of X
Audio:     Card: Intel NM10/ICH7 Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:27d8
           Sound: Advanced Linux Sound Architecture ver: k3.13.0-24-generic
Network:   Card-1: Intel PRO/100 VE Network Connection
           driver: e100 ver: 3.5.24-k2-NAPI port: 1200 bus-ID: 04:08.0 chip-ID: 8086:1094
           IF: eth2 state: up speed: 100 Mbps duplex: full mac: 00:19:d1:6c:1d:4d
Drives:    HDD Total Size: 64.0GB (53.0% used)
           1: id: /dev/sda model: M4 size: 64.0GB serial: 000000001219090A1688 temp: 0C
           Optical: /dev/sr0 model: N/A rev: N/A dev-links: cdrom
           Features: speed: 48x multisession: yes audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: N/A
Partition: ID: / size: 58G used: 32G (58%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: a0c975d6-258b-47da-933b-0b5b28f603a0
           ID: swap-1 size: 1.06GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           label: N/A uuid: 1fb849bd-b8d3-4a22-97c0-72a71bb1749d
RAID:      System: supported: N/A
           No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 56.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 93 Uptime: 14 min Memory: 160.3/991.4MB Runlevel: 2 Gcc 
sys: 4.8.2 alt: 4.7
           Client: Shell (bash 4.3.8 running in tty 4) inxi: 1.9.17

Please paste your 'cat /proc/cpuinfo' output below.

# cat /proc/cpuinfo
processor   : 0
vendor_id   : GenuineIntel
cpu family  : 6
model       : 15
model name  : Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz
stepping    : 13
cpu MHz     : 1795.483
cache size  : 1024 KB
physical id : 0
siblings    : 2
core id     : 0
cpu cores   : 2
apicid      : 0
initial apicid  : 0
fdiv_bug    : no
f00f_bug    : no
coma_bug    : no
fpu     : yes
fpu_exception   : yes
cpuid level : 10
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat 
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc 
arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 
xtpr pdcm lahf_lm dtherm
bogomips    : 3590.96
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 1
vendor_id   : GenuineIntel
cpu family  : 6
model       : 15
model name  : Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz
stepping    : 13
cpu MHz     : 1795.483
cache size  : 1024 KB
physical id : 0
siblings    : 2
core id     : 1
cpu cores   : 2
apicid      : 1
initial apicid  : 1
fdiv_bug    : no
f00f_bug    : no
coma_bug    : no
fpu     : yes
fpu_exception   : yes
cpuid level : 10
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat 
pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc 
arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 
xtpr pdcm lahf_lm dtherm
bogomips    : 3590.96
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

please paste your 'cat /proc/meminfo' output below.

# cat /proc/meminfo
MemTotal:        1015244 kB
MemFree:           86700 kB
Buffers:           46380 kB
Cached:           725880 kB
SwapCached:            0 kB
Active:           368180 kB
Inactive:         468392 kB
Active(anon):      26400 kB
Inactive(anon):    38476 kB
Active(file):     341780 kB
Inactive(file):   429916 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:        124496 kB
HighFree:           4936 kB
LowTotal:         890748 kB
LowFree:           81764 kB
SwapTotal:       1036284 kB
SwapFree:        1036284 kB
Dirty:                 8 kB
Writeback:             0 kB
AnonPages:         64328 kB
Mapped:            11692 kB
Shmem:               548 kB
Slab:              73392 kB
SReclaimable:      64008 kB
SUnreclaim:         9384 kB
KernelStack:         744 kB
PageTables:         1056 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     1543904 kB
Committed_AS:     135856 kB
VmallocTotal:     122880 kB
VmallocUsed:        7908 kB
VmallocChunk:     110820 kB
HardwareCorrupted:     0 kB
AnonHugePages:     32768 kB
HugePages_Total:       0
HugePages_Free:        0
HugePages_Rsvd:        0
HugePages_Surp:        0
Hugepagesize:       2048 kB
DirectMap4k:       26616 kB
DirectMap2M:      886784 kB

please paste your 'sensors' output below.

# lspci -vvv
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub 
(rev 02)
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=09 <?>
    Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated 
Graphics Controller (rev 02) (prog-if 00 [VGA controller])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at 50100000 (32-bit, non-prefetchable) [size=512K]
    Region 1: I/O ports at 20e0 [size=8]
    Region 2: Memory at 40000000 (32-bit, prefetchable) [size=256M]
    Region 3: Memory at 50180000 (32-bit, non-prefetchable) [size=256K]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
        Address: 00000000  Data: 0000
    Capabilities: [d0] Power Management version 2
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: i915

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio 
Controller (rev 01)
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 43
    Region 0: Memory at 501c0000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee0300c  Data: 41e1
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
        DevCap: MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE-
        DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    Capabilities: [100 v1] Virtual Channel
        Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:   ArbSelect=Fixed
        Status: InProgress-
        VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status: NegoPending- InProgress-
        VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable+ ID=1 ArbSelect=Fixed TC/VC=80
            Status: NegoPending- InProgress-
    Capabilities: [130 v1] Root Complex Link
        Desc:   PortNumber=0f ComponentID=02 EltType=Config
        Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
            Addr:   00000000fed1c000
    Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 
01) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: 50200000-503fffff
    Prefetchable memory behind bridge: 0000000050400000-00000000505fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
        DevCap: MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE-
        DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
            ClockPM- Surprise- LLActRep+ BwNot-
        LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
            Slot #1, PowerLimit 10.000W; Interlock- NoCompl-
        SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
        SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
            Changed: MRL- PresDet- LinkState-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
        RootCap: CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee0300c  Data: 4191
    Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 1
    Capabilities: [a0] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
        Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed+ WRR32- WRR64- WRR128-
        Ctrl:   ArbSelect=Fixed
        Status: InProgress-
        VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status: NegoPending- InProgress-
        VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable- ID=0 ArbSelect=Fixed TC/VC=00
            Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
        Desc:   PortNumber=01 ComponentID=02 EltType=Config
        Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
            Addr:   00000000fed1c001
    Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 
01) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00004000-00004fff
    Memory behind bridge: 50600000-507fffff
    Prefetchable memory behind bridge: 0000000050800000-00000000509fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
        DevCap: MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE-
        DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
            ClockPM- Surprise- LLActRep+ BwNot-
        LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
            Slot #3, PowerLimit 10.000W; Interlock- NoCompl-
        SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
        SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
            Changed: MRL- PresDet- LinkState-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
        RootCap: CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee0300c  Data: 41a1
    Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 3
    Capabilities: [a0] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
        Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed+ WRR32- WRR64- WRR128-
        Ctrl:   ArbSelect=Fixed
        Status: InProgress-
        VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status: NegoPending- InProgress-
        VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable- ID=0 ArbSelect=Fixed TC/VC=00
            Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
        Desc:   PortNumber=03 ComponentID=02 EltType=Config
        Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
            Addr:   00000000fed1c001
    Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 
01) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    I/O behind bridge: 00005000-00005fff
    Memory behind bridge: 50a00000-50bfffff
    Prefetchable memory behind bridge: 0000000050c00000-0000000050dfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
        DevCap: MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE-
        DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
            ClockPM- Surprise- LLActRep+ BwNot-
        LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
            Slot #4, PowerLimit 10.000W; Interlock- NoCompl-
        SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
        SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
            Changed: MRL- PresDet- LinkState-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
        RootCap: CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee0300c  Data: 41b1
    Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI Express Port 4
    Capabilities: [a0] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
        Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed+ WRR32- WRR64- WRR128-
        Ctrl:   ArbSelect=Fixed
        Status: InProgress-
        VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status: NegoPending- InProgress-
        VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:   Enable- ID=0 ArbSelect=Fixed TC/VC=00
            Status: NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
        Desc:   PortNumber=04 ComponentID=02 EltType=Config
        Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
            Addr:   00000000fed1c001
    Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller 
#1 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 4: I/O ports at 2080 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller 
#2 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 4: I/O ports at 2060 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller 
#3 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at 2040 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller 
#4 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 16
    Region 4: I/O ports at 2020 [size=32]
    Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller 
(rev 01) (prog-if 20 [EHCI])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 23
    Region 0: Memory at 501c4000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 
[Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: 50000000-500fffff
    Prefetchable memory behind bridge: 0000000050e00000-0000000050efffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [50] Subsystem: Gateway, Inc. Device 7201

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface 
Bridge (rev 01)
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: lpc_ich

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller 
(rev 01) (prog-if 8a [Master SecP PriP])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374
    Region 4: I/O ports at 20b0 [size=16]
    Kernel driver in use: ata_piix

00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE 
mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 19
    Region 0: I/O ports at 20c8 [size=8]
    Region 1: I/O ports at 20ec [size=4]
    Region 2: I/O ports at 20c0 [size=8]
    Region 3: I/O ports at 20e8 [size=4]
    Region 4: I/O ports at 20a0 [size=16]
    Capabilities: [70] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 11
    Region 4: I/O ports at 2000 [size=32]

04:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI 
Gigabit Ethernet Controller (rev 10)
    Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (8000ns min, 16000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 18
    Region 0: I/O ports at 1100 [size=256]
    Region 1: Memory at 50001100 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at 50e00000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: r8169

04:05.0 Ethernet controller: Linksys Gigabit Network Adapter (rev 10)
    Subsystem: Linksys EG1032 v3 Instant Gigabit Network Adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 17
    Region 0: I/O ports at 1000 [size=256]
    Region 1: Memory at 50001000 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at 50e20000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: r8169

04:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection 
(rev 01)
    Subsystem: Gateway, Inc. Device 7201
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
    Region 1: I/O ports at 1200 [size=64]
    Capabilities: [dc] Power Management version 2
        Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
    Kernel driver in use: e100

Original issue reported on code.google.com by gjermund...@gmail.com on 20 Apr 2015 at 6:08