Open Yoshinee opened 6 years ago
Fri Mar 2 13:58:56 +04 2018 : Starting 6LBR /usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyACM0 -r -t enp2s0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins Contiki-contiki-6lbr-1.5.0-2489-gb85ef16 started with IPV6, RPL Rime started with address 1.2.3.4.5.6.7.8 MAC multi-radio RDC br-rdc SEC llsec-wrapper NETWORK sicslowpan 2018-03-02 13:58:56.055031: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-contiki-6lbr-1.5.0-2489-gb85ef16) 2018-03-02 13:58:56.055106: INFO: SLIP: Allocated slip device 0 -> 0 2018-03-02 13:58:56.055135: INFO: ETH: 6LBR watchdog started (interval: 60) 2018-03-02 13:58:56.055216: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/dummy.so 2018-03-02 13:58:56.055309: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/lwm2m.so 2018-03-02 13:58:56.055392: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:58:56.055446: INFO: NVM: NVM Magic : 2009 2018-03-02 13:58:56.055457: INFO: NVM: NVM Version : 6 2018-03-02 13:58:56.055465: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf 2018-03-02 13:58:56.055478: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:58:56.055490: NOTICE: 6LBR: Log level: 30 (services: ffffffff) 2018-03-02 13:58:56.055499: INFO: FRAMER: Using 802.15.4 framer 2018-03-02 13:58:56.055506: INFO: MAC: Using 'csma' mac driver 2018-03-02 13:58:56.056248: INFO: SLIP: SLIP started on /dev/ttyACM0 2018-03-02 13:58:56.066399: INFO: SCMD: Started br-cmd process 2018-03-02 13:58:56.066428: INFO: BR-RDC: SLIP RADIO configured as RADIO 2018-03-02 13:58:56.066440: INFO: BR-RDC: Reset SLIP Radio 2018-03-02 13:58:56.066450: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:58:56.068871: INFO: SLIP: cc2531: Reboot requested 2018-03-02 13:58:56.070245: INFO: SLIP: cc2531: Reverting to h/w MAC but not rebooting 2018-03-02 13:58:57.065651: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:58:57.067192: INFO: BR-RDC: Got MAC 0 : 00:12:4b:00:0e:0d:77:90 2018-03-02 13:58:58.067575: INFO: SLIP: cc2531: Setting RF channel 0x19 2018-03-02 13:58:58.267202: ERROR: SLIP: Unknown command 2018-03-02 13:58:58.267262: ERROR: BR-RDC: Set PAN-ID failed 2018-03-02 13:58:58.267281: INFO: ETH: RAW Ethernet interface init 2018-03-02 13:58:58.278702: INFO: TAP: opened device /dev/enp2s0 2018-03-02 13:58:58.278749: INFO: TAP: Running 6lbr-ifup script '/usr/lib/6lbr/6lbr-ifup' enp2s0 Link encap:Ethernet HWaddr 30:9c:23:01:d4:bc inet6 addr: fe80::329c:23ff:fe01:d4bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:228534 errors:0 dropped:0 overruns:0 frame:0 TX packets:54160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:262217279 (262.2 MB) TX bytes:7384836 (7.3 MB)
2018-03-02 13:58:58.296123: INFO: TAP: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:58:58.296180: INFO: ETH: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:58:58.296206: INFO: LLSEC: Using 'nullsec' llsec driver 2018-03-02 13:58:58.296223: INFO: MULTICAST: Using 'null' multicast driver 2018-03-02 13:58:58.296364: INFO: 6LBR: Tentative local IPv6 address fe80::212:4b00:e0d:7790 2018-03-02 13:58:58.296418: INFO: 6LBR: Tentative global IPv6 address (WSN) fd00::212:4b00:e0d:7790 2018-03-02 13:58:58.296465: INFO: 6LBR: Tentative global IPv6 address (ETH) bbbb::100 2018-03-02 13:58:58.296493: INFO: 6LBR: RA Daemon enabled 2018-03-02 13:58:58.296509: INFO: 6LBR: Checking addresses duplication 2018-03-02 13:59:09.296773: INFO: 6LBR: Configured as DODAG Root fd00::212:4b00:e0d:7790 2018-03-02 13:59:09.296845: INFO: 6LBR: Starting as RPL-Router 2018-03-02 13:59:09.297078: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:09.297167: INFO: HTTP: Starting webserver on port 80 2018-03-02 13:59:09.297288: INFO: NODECFG: Node Config init 2018-03-02 13:59:09.297310: INFO: NODECFG: No node_config.conf file specified 2018-03-02 13:59:09.297340: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:09.297419: INFO: UDPS: UDP server started CoAP push started CoAP server started 2018-03-02 13:59:09.297459: INFO: DNS: DNS proxy started 2018-03-02 13:59:09.297477: INFO: PLUGIN: Initialising dummy 2018-03-02 13:59:09.297491: INFO: DUMMY: Dummy init 2018-03-02 13:59:09.297507: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:59:09.297520: INFO: LWM2M: LWM2M Client init 2018-03-02 13:59:09.297545: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:09.297561: INFO: 6LBR: CETIC 6LBR Started RD client started 2018-03-02 13:59:19.348694: FATAL: TAP: signal 15 2018-03-02 13:59:19.348748: INFO: TAP: Running 6lbr-ifdown script '/usr/lib/6lbr/6lbr-ifdown' 2018-03-02 13:59:19.358919: INFO: BR-RDC: Set MAC 0 : 00:00:00:00:00:00:00:00
Fri Mar 2 13:59:19 +04 2018 : Starting 6LBR /usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyACM0 -r -t enp2s0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins Contiki-contiki-6lbr-1.5.0-2489-gb85ef16 started with IPV6, RPL Rime started with address 1.2.3.4.5.6.7.8 MAC multi-radio RDC br-rdc SEC llsec-wrapper NETWORK sicslowpan 2018-03-02 13:59:19.384367: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-contiki-6lbr-1.5.0-2489-gb85ef16) 2018-03-02 13:59:19.384420: INFO: SLIP: Allocated slip device 0 -> 0 2018-03-02 13:59:19.384440: INFO: ETH: 6LBR watchdog started (interval: 60) 2018-03-02 13:59:19.384518: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/dummy.so 2018-03-02 13:59:19.384591: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/lwm2m.so 2018-03-02 13:59:19.384661: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:59:19.384703: INFO: NVM: NVM Magic : 2009 2018-03-02 13:59:19.384712: INFO: NVM: NVM Version : 6 2018-03-02 13:59:19.384718: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf 2018-03-02 13:59:19.384728: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:19.384739: NOTICE: 6LBR: Log level: 30 (services: ffffffff) 2018-03-02 13:59:19.384745: INFO: FRAMER: Using 802.15.4 framer 2018-03-02 13:59:19.384751: INFO: MAC: Using 'csma' mac driver 2018-03-02 13:59:19.385344: INFO: SLIP: SLIP started on /dev/ttyACM0 2018-03-02 13:59:19.395496: INFO: SCMD: Started br-cmd process 2018-03-02 13:59:19.395527: INFO: BR-RDC: SLIP RADIO configured as RADIO 2018-03-02 13:59:19.395539: INFO: BR-RDC: Reset SLIP Radio 2018-03-02 13:59:19.395548: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:59:19.397897: INFO: SLIP: cc2531: Reboot requested 2018-03-02 13:59:19.399249: INFO: SLIP: cc2531: Reverting to h/w MAC but not rebooting 2018-03-02 13:59:20.394624: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:59:20.396152: INFO: BR-RDC: Got MAC 0 : 00:12:4b:00:0e:0d:77:90 2018-03-02 13:59:21.396606: INFO: SLIP: cc2531: Setting RF channel 0x19 2018-03-02 13:59:21.596289: ERROR: SLIP: Unknown command 2018-03-02 13:59:21.596325: ERROR: BR-RDC: Set PAN-ID failed 2018-03-02 13:59:21.596344: INFO: ETH: RAW Ethernet interface init 2018-03-02 13:59:21.606709: INFO: TAP: opened device /dev/enp2s0 2018-03-02 13:59:21.606767: INFO: TAP: Running 6lbr-ifup script '/usr/lib/6lbr/6lbr-ifup' enp2s0 Link encap:Ethernet HWaddr 30:9c:23:01:d4:bc inet addr:192.168.100.16 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::329c:23ff:fe01:d4bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:228681 errors:0 dropped:0 overruns:0 frame:0 TX packets:54348 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:262242033 (262.2 MB) TX bytes:7408665 (7.4 MB)
2018-03-02 13:59:21.623705: INFO: TAP: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:59:21.623772: INFO: ETH: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:59:21.623798: INFO: LLSEC: Using 'nullsec' llsec driver 2018-03-02 13:59:21.623815: INFO: MULTICAST: Using 'null' multicast driver 2018-03-02 13:59:21.623969: INFO: 6LBR: Tentative local IPv6 address fe80::212:4b00:e0d:7790 2018-03-02 13:59:21.624021: INFO: 6LBR: Tentative global IPv6 address (WSN) fd00::212:4b00:e0d:7790 2018-03-02 13:59:21.624066: INFO: 6LBR: Tentative global IPv6 address (ETH) bbbb::100 2018-03-02 13:59:21.624094: INFO: 6LBR: RA Daemon enabled 2018-03-02 13:59:21.624110: INFO: 6LBR: Checking addresses duplication 2018-03-02 13:59:33.626653: INFO: 6LBR: Configured as DODAG Root fd00::212:4b00:e0d:7790 2018-03-02 13:59:33.626733: INFO: 6LBR: Starting as RPL-Router 2018-03-02 13:59:33.626958: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:33.627048: INFO: HTTP: Starting webserver on port 80 2018-03-02 13:59:33.627173: INFO: NODECFG: Node Config init 2018-03-02 13:59:33.627194: INFO: NODECFG: No node_config.conf file specified 2018-03-02 13:59:33.627218: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:33.627296: INFO: UDPS: UDP server started CoAP push started CoAP server started 2018-03-02 13:59:33.627348: INFO: DNS: DNS proxy started 2018-03-02 13:59:33.627367: INFO: PLUGIN: Initialising dummy 2018-03-02 13:59:33.627382: INFO: DUMMY: Dummy init 2018-03-02 13:59:33.627398: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:59:33.627412: INFO: LWM2M: LWM2M Client init 2018-03-02 13:59:33.627437: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:33.627453: INFO: 6LBR: CETIC 6LBR Started RD client started 2018-03-02 14:16:46.470752: FATAL: TAP: signal 15 2018-03-02 14:16:46.470777: INFO: TAP: Running 6lbr-ifdown script '/usr/lib/6lbr/6lbr-ifdown' 2018-03-02 14:16:46.476416: INFO: BR-RDC: Set MAC 0 : 00:00:00:00:00:00:00:00
Fri Mar 2 14:17:28 +04 2018 : Starting 6LBR /usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyACM0 -r -t enp2s0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins Contiki-contiki-6lbr-1.5.0-2489-gb85ef16 started with IPV6, RPL Rime started with address 1.2.3.4.5.6.7.8 MAC multi-radio RDC br-rdc SEC llsec-wrapper NETWORK sicslowpan 2018-03-02 14:17:29.030061: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-contiki-6lbr-1.5.0-2489-gb85ef16) 2018-03-02 14:17:29.030107: INFO: SLIP: Allocated slip device 0 -> 0 2018-03-02 14:17:29.030125: INFO: ETH: 6LBR watchdog started (interval: 60) 2018-03-02 14:17:29.060689: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/dummy.so 2018-03-02 14:17:29.061643: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/lwm2m.so 2018-03-02 14:17:29.089038: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 14:17:29.096133: INFO: NVM: NVM Magic : 2009 2018-03-02 14:17:29.096148: INFO: NVM: NVM Version : 6 2018-03-02 14:17:29.096156: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf 2018-03-02 14:17:29.096169: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:29.096179: NOTICE: 6LBR: Log level: 30 (services: ffffffff) 2018-03-02 14:17:29.096186: INFO: FRAMER: Using 802.15.4 framer 2018-03-02 14:17:29.096191: INFO: MAC: Using 'csma' mac driver 2018-03-02 14:17:29.096870: INFO: SLIP: SLIP started on /dev/ttyACM0 2018-03-02 14:17:29.108443: INFO: SCMD: Started br-cmd process 2018-03-02 14:17:29.108478: INFO: BR-RDC: SLIP RADIO configured as RADIO 2018-03-02 14:17:29.108483: INFO: BR-RDC: Reset SLIP Radio 2018-03-02 14:17:29.108487: INFO: BR-RDC: Fetching MAC address 2018-03-02 14:17:29.110836: INFO: SLIP: cc2531: Reboot requested 2018-03-02 14:17:29.112209: INFO: SLIP: cc2531: Reverting to h/w MAC but not rebooting 2018-03-02 14:17:30.107894: INFO: BR-RDC: Fetching MAC address 2018-03-02 14:17:30.109469: INFO: BR-RDC: Got MAC 0 : 00:12:4b:00:0e:0d:77:90 2018-03-02 14:17:31.109782: INFO: SLIP: cc2531: Setting RF channel 0x19 2018-03-02 14:17:31.309406: ERROR: SLIP: Unknown command 2018-03-02 14:17:31.309430: ERROR: BR-RDC: Set PAN-ID failed 2018-03-02 14:17:31.309441: INFO: ETH: RAW Ethernet interface init 2018-03-02 14:17:31.319910: INFO: TAP: opened device /dev/enp2s0 2018-03-02 14:17:31.319942: INFO: TAP: Running 6lbr-ifup script '/usr/lib/6lbr/6lbr-ifup' enp2s0 Link encap:Ethernet HWaddr 30:9c:23:01:d4:bc inet addr:192.168.100.16 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::329c:23ff:fe01:d4bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:79 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:221788 (221.7 KB) TX bytes:9093 (9.0 KB)
2018-03-02 14:17:31.645223: INFO: TAP: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 14:17:31.645261: INFO: ETH: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 14:17:31.645279: INFO: LLSEC: Using 'nullsec' llsec driver 2018-03-02 14:17:31.645289: INFO: MULTICAST: Using 'null' multicast driver 2018-03-02 14:17:31.645406: INFO: 6LBR: Tentative local IPv6 address fe80::212:4b00:e0d:7790 2018-03-02 14:17:31.645458: INFO: 6LBR: Tentative global IPv6 address (WSN) fd00::212:4b00:e0d:7790 2018-03-02 14:17:31.645482: INFO: 6LBR: Tentative global IPv6 address (ETH) bbbb::100 2018-03-02 14:17:31.645497: INFO: 6LBR: RA Daemon enabled 2018-03-02 14:17:31.645505: INFO: 6LBR: Checking addresses duplication 2018-03-02 14:17:42.646592: INFO: 6LBR: Configured as DODAG Root fd00::212:4b00:e0d:7790 2018-03-02 14:17:42.646637: INFO: 6LBR: Starting as RPL-Router 2018-03-02 14:17:42.798882: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:42.798958: INFO: HTTP: Starting webserver on port 80 2018-03-02 14:17:42.799020: INFO: NODECFG: Node Config init 2018-03-02 14:17:42.799031: INFO: NODECFG: No node_config.conf file specified 2018-03-02 14:17:42.799043: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:42.799230: INFO: UDPS: UDP server started CoAP push started CoAP server started 2018-03-02 14:17:42.799253: INFO: DNS: DNS proxy started 2018-03-02 14:17:42.799262: INFO: PLUGIN: Initialising dummy 2018-03-02 14:17:42.799269: INFO: DUMMY: Dummy init 2018-03-02 14:17:42.799276: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 14:17:42.799283: INFO: LWM2M: LWM2M Client init 2018-03-02 14:17:42.799296: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:42.799303: INFO: 6LBR: CETIC 6LBR Started
Hello, i am not being able to have access to my web server and also i dont know how to change the channel 19 of my slip radio to make it become 25
Try to refer to https://sunmaysky.blogspot.tw/2015/08/setup-6lbr-to-run-6lowpan-with-cc2531.html
Fri Mar 2 13:58:56 +04 2018 : Starting 6LBR /usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyACM0 -r -t enp2s0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins
Contiki-contiki-6lbr-1.5.0-2489-gb85ef16 started with IPV6, RPL Rime started with address 1.2.3.4.5.6.7.8 MAC multi-radio RDC br-rdc SEC llsec-wrapper NETWORK sicslowpan 2018-03-02 13:58:56.055031: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-contiki-6lbr-1.5.0-2489-gb85ef16) 2018-03-02 13:58:56.055106: INFO: SLIP: Allocated slip device 0 -> 0 2018-03-02 13:58:56.055135: INFO: ETH: 6LBR watchdog started (interval: 60) 2018-03-02 13:58:56.055216: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/dummy.so 2018-03-02 13:58:56.055309: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/lwm2m.so 2018-03-02 13:58:56.055392: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:58:56.055446: INFO: NVM: NVM Magic : 2009 2018-03-02 13:58:56.055457: INFO: NVM: NVM Version : 6 2018-03-02 13:58:56.055465: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf 2018-03-02 13:58:56.055478: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:58:56.055490: NOTICE: 6LBR: Log level: 30 (services: ffffffff) 2018-03-02 13:58:56.055499: INFO: FRAMER: Using 802.15.4 framer 2018-03-02 13:58:56.055506: INFO: MAC: Using 'csma' mac driver 2018-03-02 13:58:56.056248: INFO: SLIP: SLIP started on /dev/ttyACM0 2018-03-02 13:58:56.066399: INFO: SCMD: Started br-cmd process 2018-03-02 13:58:56.066428: INFO: BR-RDC: SLIP RADIO configured as RADIO 2018-03-02 13:58:56.066440: INFO: BR-RDC: Reset SLIP Radio 2018-03-02 13:58:56.066450: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:58:56.068871: INFO: SLIP: cc2531: Reboot requested 2018-03-02 13:58:56.070245: INFO: SLIP: cc2531: Reverting to h/w MAC but not rebooting 2018-03-02 13:58:57.065651: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:58:57.067192: INFO: BR-RDC: Got MAC 0 : 00:12:4b:00:0e:0d:77:90 2018-03-02 13:58:58.067575: INFO: SLIP: cc2531: Setting RF channel 0x19 2018-03-02 13:58:58.267202: ERROR: SLIP: Unknown command 2018-03-02 13:58:58.267262: ERROR: BR-RDC: Set PAN-ID failed 2018-03-02 13:58:58.267281: INFO: ETH: RAW Ethernet interface init 2018-03-02 13:58:58.278702: INFO: TAP: opened device /dev/enp2s0 2018-03-02 13:58:58.278749: INFO: TAP: Running 6lbr-ifup script '/usr/lib/6lbr/6lbr-ifup' enp2s0 Link encap:Ethernet HWaddr 30:9c:23:01:d4:bc
inet6 addr: fe80::329c:23ff:fe01:d4bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:228534 errors:0 dropped:0 overruns:0 frame:0 TX packets:54160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:262217279 (262.2 MB) TX bytes:7384836 (7.3 MB)
2018-03-02 13:58:58.296123: INFO: TAP: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:58:58.296180: INFO: ETH: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:58:58.296206: INFO: LLSEC: Using 'nullsec' llsec driver 2018-03-02 13:58:58.296223: INFO: MULTICAST: Using 'null' multicast driver 2018-03-02 13:58:58.296364: INFO: 6LBR: Tentative local IPv6 address fe80::212:4b00:e0d:7790 2018-03-02 13:58:58.296418: INFO: 6LBR: Tentative global IPv6 address (WSN) fd00::212:4b00:e0d:7790 2018-03-02 13:58:58.296465: INFO: 6LBR: Tentative global IPv6 address (ETH) bbbb::100 2018-03-02 13:58:58.296493: INFO: 6LBR: RA Daemon enabled 2018-03-02 13:58:58.296509: INFO: 6LBR: Checking addresses duplication 2018-03-02 13:59:09.296773: INFO: 6LBR: Configured as DODAG Root fd00::212:4b00:e0d:7790 2018-03-02 13:59:09.296845: INFO: 6LBR: Starting as RPL-Router 2018-03-02 13:59:09.297078: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:09.297167: INFO: HTTP: Starting webserver on port 80 2018-03-02 13:59:09.297288: INFO: NODECFG: Node Config init 2018-03-02 13:59:09.297310: INFO: NODECFG: No node_config.conf file specified 2018-03-02 13:59:09.297340: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:09.297419: INFO: UDPS: UDP server started CoAP push started CoAP server started 2018-03-02 13:59:09.297459: INFO: DNS: DNS proxy started 2018-03-02 13:59:09.297477: INFO: PLUGIN: Initialising dummy 2018-03-02 13:59:09.297491: INFO: DUMMY: Dummy init 2018-03-02 13:59:09.297507: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:59:09.297520: INFO: LWM2M: LWM2M Client init 2018-03-02 13:59:09.297545: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:09.297561: INFO: 6LBR: CETIC 6LBR Started RD client started 2018-03-02 13:59:19.348694: FATAL: TAP: signal 15 2018-03-02 13:59:19.348748: INFO: TAP: Running 6lbr-ifdown script '/usr/lib/6lbr/6lbr-ifdown' 2018-03-02 13:59:19.358919: INFO: BR-RDC: Set MAC 0 : 00:00:00:00:00:00:00:00
Fri Mar 2 13:59:19 +04 2018 : Starting 6LBR /usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyACM0 -r -t enp2s0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins
Contiki-contiki-6lbr-1.5.0-2489-gb85ef16 started with IPV6, RPL Rime started with address 1.2.3.4.5.6.7.8 MAC multi-radio RDC br-rdc SEC llsec-wrapper NETWORK sicslowpan 2018-03-02 13:59:19.384367: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-contiki-6lbr-1.5.0-2489-gb85ef16) 2018-03-02 13:59:19.384420: INFO: SLIP: Allocated slip device 0 -> 0 2018-03-02 13:59:19.384440: INFO: ETH: 6LBR watchdog started (interval: 60) 2018-03-02 13:59:19.384518: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/dummy.so 2018-03-02 13:59:19.384591: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/lwm2m.so 2018-03-02 13:59:19.384661: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:59:19.384703: INFO: NVM: NVM Magic : 2009 2018-03-02 13:59:19.384712: INFO: NVM: NVM Version : 6 2018-03-02 13:59:19.384718: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf 2018-03-02 13:59:19.384728: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:19.384739: NOTICE: 6LBR: Log level: 30 (services: ffffffff) 2018-03-02 13:59:19.384745: INFO: FRAMER: Using 802.15.4 framer 2018-03-02 13:59:19.384751: INFO: MAC: Using 'csma' mac driver 2018-03-02 13:59:19.385344: INFO: SLIP: SLIP started on /dev/ttyACM0 2018-03-02 13:59:19.395496: INFO: SCMD: Started br-cmd process 2018-03-02 13:59:19.395527: INFO: BR-RDC: SLIP RADIO configured as RADIO 2018-03-02 13:59:19.395539: INFO: BR-RDC: Reset SLIP Radio 2018-03-02 13:59:19.395548: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:59:19.397897: INFO: SLIP: cc2531: Reboot requested 2018-03-02 13:59:19.399249: INFO: SLIP: cc2531: Reverting to h/w MAC but not rebooting 2018-03-02 13:59:20.394624: INFO: BR-RDC: Fetching MAC address 2018-03-02 13:59:20.396152: INFO: BR-RDC: Got MAC 0 : 00:12:4b:00:0e:0d:77:90 2018-03-02 13:59:21.396606: INFO: SLIP: cc2531: Setting RF channel 0x19 2018-03-02 13:59:21.596289: ERROR: SLIP: Unknown command 2018-03-02 13:59:21.596325: ERROR: BR-RDC: Set PAN-ID failed 2018-03-02 13:59:21.596344: INFO: ETH: RAW Ethernet interface init 2018-03-02 13:59:21.606709: INFO: TAP: opened device /dev/enp2s0 2018-03-02 13:59:21.606767: INFO: TAP: Running 6lbr-ifup script '/usr/lib/6lbr/6lbr-ifup' enp2s0 Link encap:Ethernet HWaddr 30:9c:23:01:d4:bc
inet addr:192.168.100.16 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::329c:23ff:fe01:d4bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:228681 errors:0 dropped:0 overruns:0 frame:0 TX packets:54348 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:262242033 (262.2 MB) TX bytes:7408665 (7.4 MB)
2018-03-02 13:59:21.623705: INFO: TAP: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:59:21.623772: INFO: ETH: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 13:59:21.623798: INFO: LLSEC: Using 'nullsec' llsec driver 2018-03-02 13:59:21.623815: INFO: MULTICAST: Using 'null' multicast driver 2018-03-02 13:59:21.623969: INFO: 6LBR: Tentative local IPv6 address fe80::212:4b00:e0d:7790 2018-03-02 13:59:21.624021: INFO: 6LBR: Tentative global IPv6 address (WSN) fd00::212:4b00:e0d:7790 2018-03-02 13:59:21.624066: INFO: 6LBR: Tentative global IPv6 address (ETH) bbbb::100 2018-03-02 13:59:21.624094: INFO: 6LBR: RA Daemon enabled 2018-03-02 13:59:21.624110: INFO: 6LBR: Checking addresses duplication 2018-03-02 13:59:33.626653: INFO: 6LBR: Configured as DODAG Root fd00::212:4b00:e0d:7790 2018-03-02 13:59:33.626733: INFO: 6LBR: Starting as RPL-Router 2018-03-02 13:59:33.626958: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:33.627048: INFO: HTTP: Starting webserver on port 80 2018-03-02 13:59:33.627173: INFO: NODECFG: Node Config init 2018-03-02 13:59:33.627194: INFO: NODECFG: No node_config.conf file specified 2018-03-02 13:59:33.627218: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:33.627296: INFO: UDPS: UDP server started CoAP push started CoAP server started 2018-03-02 13:59:33.627348: INFO: DNS: DNS proxy started 2018-03-02 13:59:33.627367: INFO: PLUGIN: Initialising dummy 2018-03-02 13:59:33.627382: INFO: DUMMY: Dummy init 2018-03-02 13:59:33.627398: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 13:59:33.627412: INFO: LWM2M: LWM2M Client init 2018-03-02 13:59:33.627437: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 13:59:33.627453: INFO: 6LBR: CETIC 6LBR Started RD client started 2018-03-02 14:16:46.470752: FATAL: TAP: signal 15 2018-03-02 14:16:46.470777: INFO: TAP: Running 6lbr-ifdown script '/usr/lib/6lbr/6lbr-ifdown' 2018-03-02 14:16:46.476416: INFO: BR-RDC: Set MAC 0 : 00:00:00:00:00:00:00:00
Fri Mar 2 14:17:28 +04 2018 : Starting 6LBR /usr/lib/6lbr/bin/cetic_6lbr_router -c /etc/6lbr/nvm.dat -F /etc/6lbr/factory.dat -o /etc/6lbr/nvm.conf -s /dev/ttyACM0 -r -t enp2s0 -B 115200 -U /usr/lib/6lbr/6lbr-ifup -D /usr/lib/6lbr/6lbr-ifdown -w /usr/lib/6lbr/www -L 3 -W /var/log/6lbr.timestamp -P 60 -C /var/log/6lbr.ip -m /usr/lib/6lbr/plugins
Contiki-contiki-6lbr-1.5.0-2489-gb85ef16 started with IPV6, RPL Rime started with address 1.2.3.4.5.6.7.8 MAC multi-radio RDC br-rdc SEC llsec-wrapper NETWORK sicslowpan 2018-03-02 14:17:29.030061: NOTICE: 6LBR: Starting 6LBR version 1.5.x (Contiki-contiki-6lbr-1.5.0-2489-gb85ef16) 2018-03-02 14:17:29.030107: INFO: SLIP: Allocated slip device 0 -> 0 2018-03-02 14:17:29.030125: INFO: ETH: 6LBR watchdog started (interval: 60) 2018-03-02 14:17:29.060689: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/dummy.so 2018-03-02 14:17:29.061643: INFO: PLUGIN: Loading /usr/lib/6lbr/plugins/lwm2m.so 2018-03-02 14:17:29.089038: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 14:17:29.096133: INFO: NVM: NVM Magic : 2009 2018-03-02 14:17:29.096148: INFO: NVM: NVM Version : 6 2018-03-02 14:17:29.096156: INFO: CONFIG: Loading configuration : /etc/6lbr/nvm.conf 2018-03-02 14:17:29.096169: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:29.096179: NOTICE: 6LBR: Log level: 30 (services: ffffffff) 2018-03-02 14:17:29.096186: INFO: FRAMER: Using 802.15.4 framer 2018-03-02 14:17:29.096191: INFO: MAC: Using 'csma' mac driver 2018-03-02 14:17:29.096870: INFO: SLIP: SLIP started on /dev/ttyACM0 2018-03-02 14:17:29.108443: INFO: SCMD: Started br-cmd process 2018-03-02 14:17:29.108478: INFO: BR-RDC: SLIP RADIO configured as RADIO 2018-03-02 14:17:29.108483: INFO: BR-RDC: Reset SLIP Radio 2018-03-02 14:17:29.108487: INFO: BR-RDC: Fetching MAC address 2018-03-02 14:17:29.110836: INFO: SLIP: cc2531: Reboot requested 2018-03-02 14:17:29.112209: INFO: SLIP: cc2531: Reverting to h/w MAC but not rebooting 2018-03-02 14:17:30.107894: INFO: BR-RDC: Fetching MAC address 2018-03-02 14:17:30.109469: INFO: BR-RDC: Got MAC 0 : 00:12:4b:00:0e:0d:77:90 2018-03-02 14:17:31.109782: INFO: SLIP: cc2531: Setting RF channel 0x19 2018-03-02 14:17:31.309406: ERROR: SLIP: Unknown command 2018-03-02 14:17:31.309430: ERROR: BR-RDC: Set PAN-ID failed 2018-03-02 14:17:31.309441: INFO: ETH: RAW Ethernet interface init 2018-03-02 14:17:31.319910: INFO: TAP: opened device /dev/enp2s0 2018-03-02 14:17:31.319942: INFO: TAP: Running 6lbr-ifup script '/usr/lib/6lbr/6lbr-ifup' enp2s0 Link encap:Ethernet HWaddr 30:9c:23:01:d4:bc
inet addr:192.168.100.16 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::329c:23ff:fe01:d4bc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:79 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:221788 (221.7 KB) TX bytes:9093 (9.0 KB)
2018-03-02 14:17:31.645223: INFO: TAP: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 14:17:31.645261: INFO: ETH: Eth MAC address : 30:9c:23:01:d4:bc 2018-03-02 14:17:31.645279: INFO: LLSEC: Using 'nullsec' llsec driver 2018-03-02 14:17:31.645289: INFO: MULTICAST: Using 'null' multicast driver 2018-03-02 14:17:31.645406: INFO: 6LBR: Tentative local IPv6 address fe80::212:4b00:e0d:7790 2018-03-02 14:17:31.645458: INFO: 6LBR: Tentative global IPv6 address (WSN) fd00::212:4b00:e0d:7790 2018-03-02 14:17:31.645482: INFO: 6LBR: Tentative global IPv6 address (ETH) bbbb::100 2018-03-02 14:17:31.645497: INFO: 6LBR: RA Daemon enabled 2018-03-02 14:17:31.645505: INFO: 6LBR: Checking addresses duplication 2018-03-02 14:17:42.646592: INFO: 6LBR: Configured as DODAG Root fd00::212:4b00:e0d:7790 2018-03-02 14:17:42.646637: INFO: 6LBR: Starting as RPL-Router 2018-03-02 14:17:42.798882: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:42.798958: INFO: HTTP: Starting webserver on port 80 2018-03-02 14:17:42.799020: INFO: NODECFG: Node Config init 2018-03-02 14:17:42.799031: INFO: NODECFG: No node_config.conf file specified 2018-03-02 14:17:42.799043: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:42.799230: INFO: UDPS: UDP server started CoAP push started CoAP server started 2018-03-02 14:17:42.799253: INFO: DNS: DNS proxy started 2018-03-02 14:17:42.799262: INFO: PLUGIN: Initialising dummy 2018-03-02 14:17:42.799269: INFO: DUMMY: Dummy init 2018-03-02 14:17:42.799276: INFO: PLUGIN: Initialising lwm2m-client 2018-03-02 14:17:42.799283: INFO: LWM2M: LWM2M Client init 2018-03-02 14:17:42.799296: WARN: CONFIG: Can not open /etc/6lbr/nvm.conf : No such file or directory 2018-03-02 14:17:42.799303: INFO: 6LBR: CETIC 6LBR Started
Hello, i am not being able to have access to my web server and also i dont know how to change the channel 19 of my slip radio to make it become 25