Summary: Only a single xbox controller connected to my PC is showing up when I start CFBR. The second controller never registers when I try to play an exhibition game for example.
Setup: Windows 10 PC running RPCS3 Version: 0.0.28-15360-30a5d646 Alpha | master. I am running the PS3 version disc game with the xbox controller setup. My NCAA Football 14 is at 01.02. The xbox controllers are MS official Xbox 1 controllers and are connected via bluetooth. They are the same model and make.
What I have done to try and resolve:
Tried each controller separately and they both work as a single controller in the game. I have verified via control panel in windows that both controllers are connected. I have verified after the problem arises that both controllers are still connected in control panel and in RPSC3. I have set my RPSC3 up with Xinput and both controllers are registered and show as connected. I can see them both when I test movement within RPSC3 pads setting. My game has worked for some time now with a single controller with no real issues but I am trying to have a 2nd person play for the first time.
Any advice as to what I can try would be appreciated or if this is supported and tested. I googled for 2nd controller problems but most of the results revolve around controllers not working at all. Thanks in advance.
Was able to reproduce this issue in another game. This is not a CFBR issue but likely an RPSC3 or user configuration problem. Recommend closing the issue. Thank you.
Summary: Only a single xbox controller connected to my PC is showing up when I start CFBR. The second controller never registers when I try to play an exhibition game for example.
Setup: Windows 10 PC running RPCS3 Version: 0.0.28-15360-30a5d646 Alpha | master. I am running the PS3 version disc game with the xbox controller setup. My NCAA Football 14 is at 01.02. The xbox controllers are MS official Xbox 1 controllers and are connected via bluetooth. They are the same model and make.
What I have done to try and resolve: Tried each controller separately and they both work as a single controller in the game. I have verified via control panel in windows that both controllers are connected. I have verified after the problem arises that both controllers are still connected in control panel and in RPSC3. I have set my RPSC3 up with Xinput and both controllers are registered and show as connected. I can see them both when I test movement within RPSC3 pads setting. My game has worked for some time now with a single controller with no real issues but I am trying to have a 2nd person play for the first time.
Any advice as to what I can try would be appreciated or if this is supported and tested. I googled for 2nd controller problems but most of the results revolve around controllers not working at all. Thanks in advance.