jlcpcb BOM not working anymore + CPL file missing

[sboldt1978]

Hi,

this is a really great project and I would like to implement this in my home as well - ordered via jlcpcb. I don't know if the changed something in the input files format, but now they request a CPL file (Pick&Place File) which I cannot find in the github files. Futhermore in the BOM file there are several components that cannot be matched (even when I use the special jlcpcb file. Can someone with better electronic knowledge than I have please update the BOM file and add the CPL file so that I - and everyone else who will get the stuff from jlcpcb.com can be sure to order the right parts?

Thanks a lot in advance!

best regards, Stephan

[frustreermeneer]

@sboldt1978 If you figure it out, maybe we can buy together?

[cfeenstra1024]

I'll try to find some time to update the production files. It is possible to order still, but you need to do some manual steps:

• Zip all files in the PCB Gerbers folder
• Upload the zip on JLCPCB
• Use the default settings, except for:
  • Set Remove Order Number to Specify a location
  • Enable the PCB Assembly option
  • Set Tooling holes to Added by Customer
• In the assembly wizard, you need to upload a BOM and CPL file:
  • BOM file is: Electronics\PCB Components\ESPkamstrup-BOM-JLCPCB.csv
  • CPL file is: Electronics\PCB Components\ESPkamstrup-all-pos-JLCPCB.csv
• See screen shot below for the component numbers I have used in my order (the C-numbers in the 'Matched Part Detail' column)
• In the Component Placements tab, check that all components are placed correctly. By default the transistors are rotated 180 degree. So do correct those. Select one and hit the spacebar twice to rotate. See screen shot below on how this should look at the end.

Sorry for the inconvenience. I will update the production files so all of the above will be set correctly automatically, but I cannot promise when I've time for this.

BTW: I do have a couple of these PCBs available. I could send you one if the shipping costs are reasonable from the Netherlands. If interested, please PM me through the Home Assistant commutity.

[sboldt1978]

Hi @cfeenstra1024 ,

I live in Germany, so shipping costs should be not too high from NL :-) May be I'm too stupid but I didn't find a way to send you a pm through the HA community :-( Can you please drop me a message here: https://community.home-assistant.io/u/sboldt1978/

Thanks a lot and best regards, Stephan

[frustreermeneer]

May be I'm too stupid but I didn't find a way to send you a pm through the HA community :-( Can you please drop me a message here: https://community.home-assistant.io/u/sboldt1978/

I have the same, you can't send PM's when you're new i guess. My profile is https://community.home-assistant.io/u/frustreermeneer/ I'm not sure if i can receive PM's though...

[AnpDiesel]

I did not have any luck in sending you a PM But If you have any pcb´s left. I would like to bye one. I live in denmark So shipping should be affordabel

[morotsgurka]

Hi! I've updated the files in PR #5 with these changes it should fix all problems mentioned in this issue regarding ordering from JLCPCB. Hope it helps!

Could you look over this and merge the PR, if it looks alright with you? @cfeenstra1024