Open outkastm opened 4 years ago
Hi could you please create a MQTT dump and upload it here ? That way we can test/debug with your exact device config which makes life much easier for us.
Home Assistant --> Developer tools --> Services --? mqtt.dump Filter on OpenZWave/# topic and collect the file afterwards from your config folder.
Thanks!
Thank you for looking on this mqtt_dump.txt
I notticed also that after i restart the the ozwdaemon the parameter 10 for Roller Shutter operating modes is switched back to 0 - Roller blind Mode, without positioning.
I added also Fibaro Roller Shutter 3 FGRM-223 and act the same. The button for close is disabled and no stop button. The sliding bar for positioning doesn't show the real position of the cover.
I did not implement the stop function, because the implementation via the open/close switches (like in the old Z-Wave component) did not work in my tests. Also it is currently not possible to recognise if "venetian blind mode" is active or not (because we can't read the configuration yet), therefore the tilt function is active by default. See #78 and cgarwood/python-openzwave-mqtt#53 for reference.
I have included the FGRM-222 but is not showing correctly as a roller shutter. I don't have the stop button , the down arrow is disabled and sliding bar for positioning stay always at 0. I don't use venetian mode (tilt position)
![2020-05-01 15_55_48-Configuration - Home Assistant](https://user-images.githubusercontent.com/6896481/80810545-64d8c480-8bc4-11ea-9e74-074cb43a298d.jpg)
.