Open GiorgioSantantonio opened 2 years ago
cguerrero1205
commented
2 years ago Hi. From what I was seeing, your board is running GRBL based. Then you should check which version you are running, remember that the offline driver is made for versions 1.1 and higher.
I recommend you to check and/or update the GRBL of your card and test again the offline driver operation, if the problem continues, please share with me more information.
Thanks for your feedback.
GiorgioSantantonio
commented
2 years ago Hi Carlos,
thank you for your quick answer. As I wrote in the subject my board is running the GBRL ver. 1.1
What is happen:
I can connect the CNC – no problem
I can select the control menu and I’m able to:
Unlock GBRL – no problem
Auto Home – no problem
Reset Zero – no problem
Move Axis: I can select the “main move axis” and I can select the distance, but then I see on the display the X, Y, Z position with the requested move but the CNC axis don’t move and the display is frozen (until I push back the encoder switch).
I’m grateful if you can help me in solving the problem.
Ciao
Giorgio
Da: Carlos Guerrero @.> Inviato: lunedì 10 gennaio 2022 15:04 A: cguerrero1205/LCD_GRBL @.> Cc: GiorgioSantantonio @.>; Author @.> Oggetto: Re: [cguerrero1205/LCD_GRBL] Problem with GBRL 1.1 Controller SainSmart (Issue #7)
Hi. From what I was seeing, your board is running GRBL based. Then you should check which version you are running, remember that the offline driver is made for versions 1.1 and higher.
I recommend you to check and/or update the GRBL of your card and test again the offline driver operation, if the problem continues, please share with me more information.
Thanks for your feedback.
— Reply to this email directly, view it on GitHub https://github.com/cguerrero1205/LCD_GRBL/issues/7#issuecomment-1008902806 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AXHLR4ZGS3WFGOYZ5KQAMRLUVLROBANCNFSM5LTCHUQQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AXHLR45A7WEWQZQ5BI3S4RDUVLROBA5CNFSM5LTCHUQ2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOHQRKFFQ.gif Message ID: @. @.> >
Hi Carlos, I built your good project but I'm an issue in using it with my controller in subject (accepting all standard command). The "move" commands don't work at all, a part the "home" command that work perfectly. Do you have any idea on how to solve the problem? Thank you Giorgio