SIN FM V/O tracking in v1.1.4

[mattcollier]

Hello, I received the 1.1.4 update today.

It appears that now the effective range is between -6V and -2V with a frequency range of 1.2kHz and 21kHz with all the FQ knobs at minimum. Is this the proper behavior?

I've attached a patch. sin_fm_demo.vcv.zip

[ch-nry]

Hello Matt, No, this is not the range I get with your patch:

• without any CV input, the FQ1 knobs range the frequency from very low (<20Hz) to 12KHz.
• without any CV input, FQ1 in the middle result in a 300Hz frequency
• with a 0V CV input, the frequency is not altered
• with FQ1 in the middle position, the CV input range from -6 to 6V. The frequency goes from 6 Oct bellow 300Hz (i.e : 4Hz) to 6 Oct above 300Hz (i.e about 20KHz)

This is the proper behaviour when using a sampling rate of 96KHz.

what platform are you using?

[mattcollier]

Hello, confirmed working properly as you described this morning. I retraced my steps to see if there were issues related to changing the sample rate etc. Not sure what happened yesterday. I'm on Ubuntu Studio 18.04. Thank you!