Open GYKgamer opened 2 years ago
Same iphone 5s
I used Checkra1n v0.10.2. Set ALL options in the Checkra1n settings, start the jailbreak process, as soon as you will see "right before trigger", count to 5, then very quickly remove the cable slightly (until -1 error) and plug it back in. "Booting" appears immediately and the process is 100% successful (tested on a many 5S phones with different IOS versions).
less go, thanks for the update after like 4 months
Read the previous posts in this thread carefully. There are already most of the ready-made answers to all your questions.
You used the connection via USB C, which can also be the cause of the error (how did you put the USB C connector in lightning ???) :-)
You used the connection via USB C, which can also be the cause of the error (how did you put the USB C connector in lightning ???) :-)
might of accidently wrote the wrong cable type
Tell us about your setup:
What do you expect, and what is happening instead? It should succesfully install the jailbreak
Did you see a popup on the device stating it entered "Safe Mode" due to an error? no
Does the issue also occur if you tick "Safe Mode" in the checkra1n options? no
Any other info, error logs, screenshots, ...?