Open arch-on opened 5 years ago
Theres alot of legacy code in there that i would love to remove, left over from alot of the initial development on my personal system, hardcoded values are the worst.
Looking at the device and vendor id's the controller itself is supported, but I'm very certain i havent done anything related to those specific fans, if you could spin up a virtual machine, passthrough the usb device and get some packet captures of changing the colours on the fans it'd be super helpful!
Hello,
First.... this software helps me a lot, thanks!!
I'm on Ubuntu 19.10 and check this software from source code (run with python3) with this yml file.
** start **
controllers:
- unit: 1
type: riingtrio
devices:
1: Riing Plus
2: Riing Plus
3: Riing Plus
4: Riing Plus
5: Riing Plus
- unit: 2
type: riingtrio
devices:
1: Riing Plus
2: Riing Plus
3: Riing Plus
4: Riing Plus
5: Riing Plus
- unit: 3
type: riingtrio
devices:
1: Riing Plus
2: Riing Plus
3: Riing Plus
4: Riing Plus
5: Riing Plus
- unit: 4
type: riingtrio
devices:
1: Riing Plus
2: Riing Plus
3: Riing Plus
4: Riing Plus
5: Riing Plus
- unit: 5
type: riingtrio
devices:
1: Riing Plus
2: Riing Plus
3: Riing Plus
4: Riing Plus
5: Riing Plus
- unit: 6
type: riingtrio
devices:
1: Riing Plus
2: Riing Plus
3: Riing Plus
4: Riing Plus
5: Riing Plus
fan_manager:
model: locked_speed
speed: 50
lighting_manager:
speed: normal
model: full
r: 100
g: 0
b: 0
** end **
I can control my fan's speed, but I can't the lights. I have 23 fans with 6 hubs (Riing Trio 12 and Riing Trio 14 radiator fan TT premium edition)
I tried to install a VMware workstation with windows 10 then install a TT RGB PLUS software from the Thermaltake website (https://ttrgbplus.thermaltake.com/). But the TT RGB plus can't connect to the USB hubs through VMware, so I think I can't get any packets from the Wireshark.
Do you have any idea, how can I grab packets from these hubs?
Any update on this issue? (Edited after realizing the profiles must be stored in windows not on the controller, shame)
Same as Bearbite I managed to install and got it running after dealing with the exit-code issue and one other you can read about here: https://github.com/yaml/pyyaml/wiki/PyYAML-yaml.load(input)-Deprecation However I also have the same issue with my Riing Trio fans where I can change their speed but not the LED colors.
I also have Windows installed on a 2nd sdd so let me know if there's anything I can provide, and how, which would be helpful.
Hi, thanks a lot for this software.
Are thermaltake riing trio premium edition currently supported? Can't seem to make them work: service runs, and it seems to think it changes colors and fan speed but it actually doesn't.
I am running Ubuntu 18.04.2, python 3.6.7. With debug on I get this:
Corresponding lsusb -v output seems to be:
Not sure it's relevant, but the box says that there are "30 single LEDs", while the code implies 12 (and for some lighting models like "full" it's even hard-coded):
Windows Thermaltake app works fine and best fitting option seems to be Riing Trio fan model.