ChirpStack Gateway OS v4.0.1 doesn't boot on Raspberry PI 4B V1.5 revision do3115 Soc BCM2711, 8GB RAM - Githubissues

chirpstack / chirpstack-gateway-os

OpenWrt based gateway images including ChirpStack components.

https://www.chirpstack.io

129 stars 56 forks source link

ChirpStack Gateway OS v4.0.1 doesn't boot on Raspberry PI 4B V1.5 revision do3115 Soc BCM2711, 8GB RAM #96

Closed dyane6 closed 8 months ago

dyane6 commented 1 year ago

Hardware:

Raspberry PI 4B V1.5 revision do3115 Soc BCM2711, 8GB RAM
Waveshare SX1302 hat

Software: Gateway OS V4.0.1

[X] The issue is present in the latest release.
[X] I have searched the issues of this repository and believe that this is not a duplicate.

Issue

the boot fails and the screen is frozen after the following strings
the board is not seen on the LAN

Steps to reproduce this issue

Steps:

Flash the last OS Gateway software on SD card 32 Gb
Power on the Raspberry PI 4B
The board is Ethernet wired on the LAN

log output:

the boot fails and the screen is frozen after the following strings
Here are the strings displayed on the screen: Net: eth0: ethernet@7d580000 PCIe BRCM: link up, 5.0 Gbps x 1 (SSC) PCI: Failed autoconfig bar 10 starting USB... Bus xhci_pci:

Component	Version
ChirpStack Gateway OS	v4.0.1

dloftus98 commented 1 year ago

same error for me... can't swupdate to it or install it fresh. Mine is a rpi 4b with rak2245.

brocaar commented 8 months ago

I'm closing this issue as I'm not sure if it is still relevant after Yocto -> OpenWrt migration.