Closed peekpt closed 1 year ago
Reset NVRAM opencore menue then TAB Reboot No infos about the laptop?
I did tried a few times.
Sorry it's a 650 g1 intel4600 core i7
Your certainely not booting from the post Install SSD I have the same laptop
Look the config.plist
Yes I am , with the EFI generated from the .PKG file
Your not booting from this SSD because from this SSD SIP is fully disabled like your post in image
I am , I also disabled verbose --v just to be sure I'm booting the right EFI, no USB inserted.
try booting form HP USB create install media the SIP is the same
I will reinstall tomorrow then I give you feedback
Fresh install , same thing. I don't know what to do! Are you using OCLP 0.6.2?
Wait a moment... I am using 13.3 🤨 maybe that's why, I will install 13.2.1
Same thing happened, created a new USB boot disk with the 13.2.1. What can I do?
Hi @chris1111 please don't be mad at me I want to help, I'm sorry if cause discomfort: Anyway I finally manage to get it working.
this what I did to overcome my problems (no wifi, no battery, no post install patch):
updated to last OC 0.9.1 and OCConfigurator for 0.91
in ACPI one of them was disabled can't remember the one , but I enable all:
This missing line was causing the sip problem in OCLP post install
updated all drivers for OC 0.9.1
ECEnabler was missing in order to get battery working. My intel card is working with this driver. Both methods work, one uses Airportdriver the other creates a ethernet connection bridge and you need Heliport app to mimic the status icon.
I hope this helps!
I will add delete csr-active-config
It won't change much but I don't have a problem with it.
@chris1111 Just to let you know that VoodoPs2Controller 2.3.5 it's working fine! I have full gestures now, don't need 1.9.2 anymore!
0.6.3 release intel fixed graphics on maps, imageviewer , etc...
Installed Ventura, after installing EFi and reboot can't install post patch